Parting out 67 C30/DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bobvilla67** · 08-13-2007, 02:09 PM

I wanted to sell it complete and no one was interested,so I will part it out.It has a good running 327/4spd.The cab needs rockers,corners and kick panel repair.Good glass all the way around.The front clip is from a 67 gmc,minor dings in fenders and hood but no rust.I will be keeping the rear and front disc as spares for my other 1 ton.Good title.Anything else just ask.thanks
327/4spd $250 complete
GMC grill and rad support $150
fenders $60 pair
hood $30
frame $ 50
hood hinges $20 pair
cluster $30
wire harness $30
cab $100
v-8 engine stands $10 pair
e-brake $10

**bobvilla67** · 08-14-2007, 01:51 PM

Ttt

Rally Nova · 08-14-2007, 05:00 PM

I am in search for parts to convert my 1969 GMC to a 1968 GMC, I also would like that glove box door. I have to work till late August, will that be OK?
David

Rally Nova · 08-14-2007, 05:14 PM

I need a 1967-68 hood & anything else I need to convert my 1969 GMC to a 1968 GMC. I don't know what needs to be changed to put that hood on my '69, I was told that the fenders are the same but the '67-'68 hood is a little longer.

**bobvilla67** · 08-14-2007, 05:27 PM

ok,I'm not sure of the difference in the 68-69,just know the 67 gmc grill is stamped gmc.

**bobvilla67** · 08-15-2007, 06:05 PM

The engine and trans are sold pending payment.

fenders are also sold pending payment.

all loaded up and ready to go.

wyatt earp · 08-16-2007, 09:27 PM

bob in pic #2 where the clutch z bar? muonts up to the motor i need that stud ball bolt thingy that bolts to the motor if it f/s. also how much for the stearing wheel, mines shot.

**bobvilla67** · 08-17-2007, 07:03 PM

wyatt I have the complete set up including z-bar for $15 plus shipping
steering wheel has been sold.thanks

wyatt earp · 08-17-2007, 08:28 PM

sounds good, give me till teus. 8/21 i might be able to get it shipped thru my companys system realcheap. thanks.

Spray-Bomb · 08-17-2007, 09:36 PM

Sucks that it got crushed

I'd a came & got it if you woulda called me back

**bobvilla67** · 08-18-2007, 12:51 PM

yes it did suck scrapping it.I have the pass door if you are interested in it for $50

Spray-Bomb · 08-18-2007, 01:20 PM

Is it one of the white ones you posted earlier ???

If not can I have pics

**bobvilla67** · 08-18-2007, 01:27 PM

no,those ar sold.

Spray-Bomb · 08-18-2007, 04:50 PM

pics please

**bobvilla67** · 08-20-2007, 02:20 PM

Matt,I didn't get more pics of the door,but is the one from this thread and then the other post has a pic of the door bottom.

Wyatt,I found another bolt thingy that you can have for just shipping.it is just the part that bolts to the engine.

anthony101 · 08-20-2007, 05:53 PM

is the wire harness in good shape and will it fit a 72 gmc if so im interested

08-13-2007, 02:09 PM	#1
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Parting out 67 C30/DFW I wanted to sell it complete and no one was interested,so I will part it out.It has a good running 327/4spd.The cab needs rockers,corners and kick panel repair.Good glass all the way around.The front clip is from a 67 gmc,minor dings in fenders and hood but no rust.I will be keeping the rear and front disc as spares for my other 1 ton.Good title.Anything else just ask.thanks 327/4spd $250 complete GMC grill and rad support $150 fenders $60 pair hood $30 frame $ 50 hood hinges $20 pair cluster $30 wire harness $30 cab $100 v-8 engine stands $10 pair e-brake $10 Attached Images __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350 Last edited by bobvilla67; 08-13-2007 at 02:47 PM.

08-14-2007, 05:00 PM	#3
Rally Nova Registered User Join Date: May 2005 Location: Brazoria, Texas Posts: 60	Re: Parting out 67 C30/DFW I am in search for parts to convert my 1969 GMC to a 1968 GMC, I also would like that glove box door. I have to work till late August, will that be OK? David __________________ 1969 GMC C-1500 1972 Rally Nova 1988 Monte Carlo SS 2004 GMC 2500 Crew Cab

08-14-2007, 05:14 PM	#4
Rally Nova Registered User Join Date: May 2005 Location: Brazoria, Texas Posts: 60	Re: Parting out 67 C30/DFW I need a 1967-68 hood & anything else I need to convert my 1969 GMC to a 1968 GMC. I don't know what needs to be changed to put that hood on my '69, I was told that the fenders are the same but the '67-'68 hood is a little longer. __________________ 1969 GMC C-1500 1972 Rally Nova 1988 Monte Carlo SS 2004 GMC 2500 Crew Cab

08-14-2007, 05:27 PM	#5
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Re: Parting out 67 C30/DFW ok,I'm not sure of the difference in the 68-69,just know the 67 gmc grill is stamped gmc. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

08-15-2007, 06:05 PM	#6
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Re: Parting out 67 C30/DFW The engine and trans are sold pending payment. fenders are also sold pending payment. all loaded up and ready to go. Attached Images __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

08-14-2007, 01:51 PM	#2
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Re: Parting out 67 C30/DFW Ttt __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

08-16-2007, 09:27 PM	#7
wyatt earp Registered User Join Date: Apr 2007 Location: ohio Posts: 77	Re: Parting out 67 C30/DFW bob in pic #2 where the clutch z bar? muonts up to the motor i need that stud ball bolt thingy that bolts to the motor if it f/s. also how much for the stearing wheel, mines shot.

08-17-2007, 07:03 PM	#8
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Re: Parting out 67 C30/DFW wyatt I have the complete set up including z-bar for $15 plus shipping steering wheel has been sold.thanks __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

08-17-2007, 08:28 PM	#9
wyatt earp Registered User Join Date: Apr 2007 Location: ohio Posts: 77	Re: Parting out 67 C30/DFW sounds good, give me till teus. 8/21 i might be able to get it shipped thru my companys system realcheap. thanks.

08-17-2007, 09:36 PM	#10
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Parting out 67 C30/DFW Sucks that it got crushed I'd a came & got it if you woulda called me back __________________ Just not low enough... ----------------------------- Sinister Killer

08-18-2007, 12:51 PM	#11
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Re: Parting out 67 C30/DFW yes it did suck scrapping it.I have the pass door if you are interested in it for $50 __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

08-18-2007, 01:20 PM	#12
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Parting out 67 C30/DFW Is it one of the white ones you posted earlier ??? If not can I have pics __________________ Just not low enough... ----------------------------- Sinister Killer

08-18-2007, 01:27 PM	#13
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Re: Parting out 67 C30/DFW no,those ar sold. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

08-18-2007, 04:50 PM	#14
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Parting out 67 C30/DFW pics please __________________ Just not low enough... ----------------------------- Sinister Killer

08-20-2007, 02:20 PM	#15
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 779	Re: Parting out 67 C30/DFW Matt,I didn't get more pics of the door,but is the one from this thread and then the other post has a pic of the door bottom. Wyatt,I found another bolt thingy that you can have for just shipping.it is just the part that bolts to the engine. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350



Register or Log In To remove these advertisements.

08-20-2007, 05:53 PM	#16
anthony101 Registered User Join Date: Aug 2007 Location: porterville california Posts: 20	Re: Parting out 67 C30/DFW is the wire harness in good shape and will it fit a 72 gmc if so im interested __________________ 72 gmc(under construction)

Register or Log In To remove these advertisements.