Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jkaylor68gmc · 08-13-2007, 04:49 PM

Dewayne (Fatboys'69) and I installed a set of these upper and lower tubular control arms this past weekend on his '69!! They are awesome and iIwould recommend these to anyone looking to strengthen and improve the handling of their truck. Best of all they fit perfectly and lowered the truck 1.5 inches. They fit great, look great and work great. I give these a 10 out of 10 for quality!

BTW- these are the Control Freak control arms owned by Blue Moon Motorsports in longwood, Florida. Look in the Nov/Dec issue of TRUCK BUILDER for a full install

glock35ipsc · 08-13-2007, 05:37 PM

Cool, so these and a set of 2.5" drop spindles will result in a total of 4"? Is the spring pocket lowered in the arm?

BTW, I got your PM, that's just what I was looking for. Thanks!

**1970 CST Short Wide** · 08-13-2007, 05:58 PM

I tried to find these on there web site and couldnt. Where did you get them from?????

glock35ipsc · 08-13-2007, 06:53 PM

Try http://www.bluemooncars.com/bmm-store.htm

jkaylor68gmc · 08-15-2007, 11:00 AM

Yeah, like I said we put a set on Dewaynes '69 (Fatboys'69) and he combined them with a CPP 3 inch drop coil and it came out awesome.

For the rear he added 4 inch coils paired with a set of custom made 1-inch billet drop blocks that he designed and fabricated. It handles like a mad ninja!

fatboys69 · 08-15-2007, 02:03 PM

Man They Are The Best !!!!!( Thanks For All The Help Josh !!! ) I'll Try And Post Some Updated Stance Photos Tonite. All I Have Now Is A Few Snap Shots I Took During Installation, Be Sure To Check Out The Upcoming Edition Of Truckbuilder For The Full Install. These Things Made A World Of Difference, I Already Had Swaybars And Nitrogen Shocks From Cpp Installed. These Put It Over The Edge !!!!!. Got The Rear Dropped Last Nite And Finally Got The Stance I Was Looking For.
Pro Touring !!!! With Big Tires.

bcanini · 08-15-2007, 06:05 PM

I couldn't find them on their site either... all I seen was mustang and chevy car control arms. Did you guys use one of those?

B

fatboys69 · 08-16-2007, 07:55 AM

here are some update stance pics. still has to go to the alignment shop, but the suspension is pretty much complete now. Tires are 285/70/15 rear and 255/70/15 front wheels are 15x8 TT2's w/ 4-1/2" BS.

70c10 · 08-16-2007, 08:03 AM

Your truck looks great!. How much are the new control arms?. I couldn't find them on the site. Does all 4 rims have 4.5 B.S.? Are you going to start selling the drop blocks you designed?

fatboys69 · 08-16-2007, 08:42 AM

70c10, the $$ is around the $1,300 - $ 1,500 price range for the uppers and lowers ( these things come complete with poly bushings, new shafts and ball joints. All you have to do is bolt them on!! ). Yes the B.S is 4.5 all around. Don't know about the blocks yet they are something that was made up at my work and had a local shop bend up the new u-bolts, may do it. Still trying to get our disc conversion kits pulled together so we can get them out to people who want them !!! We may do the blocks, gotta do a little cost breakdown.

jkaylor68gmc · 08-17-2007, 02:27 PM

I double checke and the arms are a little cheaper, They are about 1100.00 for the set. These however are for looks but are for the real performance buff.

jkaylor68gmc · 08-23-2007, 03:47 PM

bump bump bum.

08-13-2007, 04:49 PM	#1
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) Dewayne (Fatboys'69) and I installed a set of these upper and lower tubular control arms this past weekend on his '69!! They are awesome and iIwould recommend these to anyone looking to strengthen and improve the handling of their truck. Best of all they fit perfectly and lowered the truck 1.5 inches. They fit great, look great and work great. I give these a 10 out of 10 for quality! BTW- these are the Control Freak control arms owned by Blue Moon Motorsports in longwood, Florida. Look in the Nov/Dec issue of TRUCK BUILDER for a full install __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride Last edited by jkaylor68gmc; 08-15-2007 at 11:02 AM.

08-13-2007, 05:37 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) Cool, so these and a set of 2.5" drop spindles will result in a total of 4"? Is the spring pocket lowered in the arm? BTW, I got your PM, that's just what I was looking for. Thanks! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-13-2007, 05:58 PM	#3
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,101	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) I tried to find these on there web site and couldnt. Where did you get them from????? __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565 Last edited by 1970 CST Short Wide; 08-13-2007 at 05:58 PM.

08-13-2007, 06:53 PM	#4
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) Try http://www.bluemooncars.com/bmm-store.htm __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-15-2007, 11:00 AM	#5
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) Yeah, like I said we put a set on Dewaynes '69 (Fatboys'69) and he combined them with a CPP 3 inch drop coil and it came out awesome. For the rear he added 4 inch coils paired with a set of custom made 1-inch billet drop blocks that he designed and fabricated. It handles like a mad ninja! __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride Last edited by jkaylor68gmc; 08-15-2007 at 11:01 AM.

08-15-2007, 02:03 PM	#6
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) Man They Are The Best !!!!!( Thanks For All The Help Josh !!! ) I'll Try And Post Some Updated Stance Photos Tonite. All I Have Now Is A Few Snap Shots I Took During Installation, Be Sure To Check Out The Upcoming Edition Of Truckbuilder For The Full Install. These Things Made A World Of Difference, I Already Had Swaybars And Nitrogen Shocks From Cpp Installed. These Put It Over The Edge !!!!!. Got The Rear Dropped Last Nite And Finally Got The Stance I Was Looking For. Pro Touring !!!! With Big Tires. Attached Images

08-15-2007, 06:05 PM	#7
bcanini "Taste It" Join Date: Aug 2006 Location: Keizer, Oregon Posts: 280	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) I couldn't find them on their site either... all I seen was mustang and chevy car control arms. Did you guys use one of those? B __________________ 71 Chevrolet short fleet Cheyenne air cab/tilt w buddy buckets pretty stock other wise. 2007 Silverado Crew with the MAX Pack and loaded 2007 CX-9 "Hopefully when I die.. my wife wont sell my stuff for what I said I paid for it" It's easier to ask forgiveness than it is to ask permission. Last edited by bcanini; 08-15-2007 at 06:05 PM.

08-16-2007, 07:55 AM	#8
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) here are some update stance pics. still has to go to the alignment shop, but the suspension is pretty much complete now. Tires are 285/70/15 rear and 255/70/15 front wheels are 15x8 TT2's w/ 4-1/2" BS. Attached Images

08-16-2007, 08:03 AM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) Your truck looks great!. How much are the new control arms?. I couldn't find them on the site. Does all 4 rims have 4.5 B.S.? Are you going to start selling the drop blocks you designed? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 08-16-2007 at 08:16 AM.

08-16-2007, 08:42 AM	#10
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) 70c10, the $$ is around the $1,300 - $ 1,500 price range for the uppers and lowers ( these things come complete with poly bushings, new shafts and ball joints. All you have to do is bolt them on!! ). Yes the B.S is 4.5 all around. Don't know about the blocks yet they are something that was made up at my work and had a local shop bend up the new u-bolts, may do it. Still trying to get our disc conversion kits pulled together so we can get them out to people who want them !!! We may do the blocks, gotta do a little cost breakdown.

08-17-2007, 02:27 PM	#11
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) I double checke and the arms are a little cheaper, They are about 1100.00 for the set. These however are for looks but are for the real performance buff. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride Last edited by jkaylor68gmc; 08-23-2007 at 03:48 PM.

08-23-2007, 03:47 PM	#12
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Part Recommendation Great Product. Blue Moon Motorsports (Control Freak) bump bump bum. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.