The burbs new look. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boostat4500 · 08-13-2007, 09:04 PM

Here's some new pics of the burb. I just got done with the 14 bolt, Ford Dana 44 high pinion, rear disc brake, 38x15.50r16 swap. The lift is 6" with both axles moved back 1". Shot the primer last weekend so now I can start finishing the body work.

msgross · 08-13-2007, 09:08 PM

Wow!

boostat4500 · 08-13-2007, 09:10 PM

A few more.

msgross · 08-13-2007, 09:13 PM

double wow, nice truck

OldCreek · 08-13-2007, 09:15 PM

Nice!!!

Looks like MT Classics? Nice!!!

Wil

1969k10stepside · 08-13-2007, 09:18 PM

Awesome 'burb

scotto0609 · 08-13-2007, 09:28 PM

Its perfect! dont paint it!

1tonblaze · 08-13-2007, 09:40 PM

sweet

62 short step · 08-13-2007, 10:37 PM

I like it!! Alot!!

toomanytoyz · 08-13-2007, 11:33 PM

Quote:

Originally Posted by msgross

double wow, nice truck

Triple Wow........................

Rick

boostat4500 · 08-14-2007, 12:00 AM

Yes, MT Classic II's, 16x12. It will be this color till this fall, even though I don't really like it. It has more shine than I'd wanted it to, so it looks like a lower cost paint job in my opinion. Then most of it will be getting sanded off in preperation for paint. I have to say, spraying something this big was a little bit of a challenge. Especially since I'd never done it before. The roof is HUGE!
Thanks for the compliments!

earl87gta · 08-14-2007, 03:38 AM

Looks great ! I cant tell in the pics but did you use )rates to move the axles and are you going to trim the fenders any or is it just a driver.

**Yukon Jack** · 08-14-2007, 12:05 PM

That is very nice! There is nothing like the sight of a lifted 67-72 Burb. That gets your attention for sure.

Burt4x4 · 08-14-2007, 12:48 PM

SWEET!

kawahawk · 08-14-2007, 07:57 PM

I love It!!

RANDY COX · 08-14-2007, 10:18 PM

Sweet fancy moses,I like the looks of that,I luv my BURB,TOO.

boostat4500 · 08-15-2007, 12:57 AM

To move the axles I used a new spring perch ( had to anyway ) with an off set pin whole in the rear. And in the front I made my own "0" rate block and welded it to the axle. It's only 3/4" thick so nothing crazy. It's just a driver that won't see anything more than fireroads so I don't plan to cut the fenders at all. I'd like to eventually get the axles narrowed to bring the tires back into the wheel well completely. That would give me a little more clearance as well. I like the fenders as crammed as posable with tire!

bad_turbo · 08-19-2007, 07:06 PM

WOW! WOW! WOW! WOW!

That is nice!!! Did I say WOW!?

FRENCHBLUE72 · 08-19-2007, 10:46 PM

those subs look huge when there are lifted that thing is killer looking..

earl87gta · 11-21-2007, 06:02 AM

boostat4500 ,
how wide is the whell your runing and how lose to 38 15.50 did the tire come out . my 36 x 12.50 were 35 3/4 by 11.

boostat4500 · 11-21-2007, 08:19 PM

The wheels are 16x12. They are 37.5" tall. The tread is 12.5" wide and at the widest part off the side biters, just under 16" wide. Made my old BFG mud 35x12.5's look tiny. Did you have 11" of tread or is that the sidewall width?

earl87gta · 11-21-2007, 09:27 PM

Thanks My tread was 11. Im trying to decide on new tires and cant make up my mind. I have been thining og going with 37 12.50 hummer tires but i odnt think they will be wide enough for me.

boostat4500 · 11-21-2007, 11:28 PM

How wide are you wanting? I actually wish mine were about an inch narrower. I didn't want this wide but got such a good deal on them, I couldn't resist. I don't like that they stick out past the fender. If I keep the truck, I might look into getting the axles narrowed. What kind of tires did you have? I've never seen a 12.50 with that much tread width.

earl87gta · 11-22-2007, 09:11 AM

There a set of buck shots there not bad tires I just want them bigger and I like the wider look it doesnt bother me if they stick out past the fenders. I dont have a paint job to worry about. you need to check out the hummer tires if you dont want a wide tire they would not stick out so far I think changing you rims would fix the trouble easier then shorting the axles that is a $$$ thing to have done.
Here is a set of 37 hummer tires on a truck you can see they are a true 37 tire. and they dont stick out past the fenders. http://67-72chevytrucks.com/vboard/s...d.php?t=261824

boostat4500 · 11-23-2007, 01:04 AM

Changing rims would definetley be the easiest way to go. The problem is, I'm very,very picky about wheels on a truck. I've never had much luck finding wheels with options for the back spacing. Everything I found in a 16x12 were all 4 1/2" backspace. I'd love about a 5 1/2 or 6". Any suggestions on brands to look at?

08-13-2007, 09:04 PM	#1
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	The burbs new look. Here's some new pics of the burb. I just got done with the 14 bolt, Ford Dana 44 high pinion, rear disc brake, 38x15.50r16 swap. The lift is 6" with both axles moved back 1". Shot the primer last weekend so now I can start finishing the body work. Attached Images __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

08-13-2007, 09:08 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: The burbs new look. Wow! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-13-2007, 09:10 PM	#3
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The burbs new look. A few more. Attached Images __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

08-13-2007, 09:13 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: The burbs new look. double wow, nice truck __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-13-2007, 09:15 PM	#5
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: The burbs new look. Nice!!! Looks like MT Classics? Nice!!! Wil __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

08-13-2007, 09:18 PM	#6
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: The burbs new look. Awesome 'burb

08-13-2007, 09:28 PM	#7
scotto0609 Junior Member Join Date: Nov 2005 Location: new york Posts: 226	Re: The burbs new look. Its perfect! dont paint it!

08-13-2007, 09:40 PM	#8
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: The burbs new look. sweet __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht .

08-13-2007, 10:37 PM	#9
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: The burbs new look. I like it!! Alot!!

08-14-2007, 12:00 AM	#11
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The burbs new look. Yes, MT Classic II's, 16x12. It will be this color till this fall, even though I don't really like it. It has more shine than I'd wanted it to, so it looks like a lower cost paint job in my opinion. Then most of it will be getting sanded off in preperation for paint. I have to say, spraying something this big was a little bit of a challenge. Especially since I'd never done it before. The roof is HUGE! Thanks for the compliments! __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

08-14-2007, 03:38 AM	#12
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: The burbs new look. Looks great ! I cant tell in the pics but did you use )rates to move the axles and are you going to trim the fenders any or is it just a driver. __________________ Earl 68 2500 4x4 GMC Burb Last edited by earl87gta; 08-14-2007 at 03:39 AM.

08-14-2007, 12:05 PM	#13
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: The burbs new look. That is very nice! There is nothing like the sight of a lifted 67-72 Burb. That gets your attention for sure. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-14-2007, 12:48 PM	#14
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: The burbs new look. SWEET! __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

08-14-2007, 07:57 PM	#15
kawahawk Junior Member Join Date: May 2007 Location: Council Bluffs, Iowa Posts: 41	Re: The burbs new look. I love It!! __________________ '72 Cheyenne K-10 LWB '05 Jeep Wrangler Willy's Edition '07 Victory Vegas '99 Subaru Legacy SUS

08-14-2007, 10:18 PM	#16
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: The burbs new look. Sweet fancy moses,I like the looks of that,I luv my BURB,TOO. __________________ 1964 BBC 402 4x4



Register or Log In To remove these advertisements.

08-15-2007, 12:57 AM	#17
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The burbs new look. To move the axles I used a new spring perch ( had to anyway ) with an off set pin whole in the rear. And in the front I made my own "0" rate block and welded it to the axle. It's only 3/4" thick so nothing crazy. It's just a driver that won't see anything more than fireroads so I don't plan to cut the fenders at all. I'd like to eventually get the axles narrowed to bring the tires back into the wheel well completely. That would give me a little more clearance as well. I like the fenders as crammed as posable with tire! __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

08-19-2007, 07:06 PM	#18
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: The burbs new look. WOW! WOW! WOW! WOW! That is nice!!! Did I say WOW!? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

08-19-2007, 10:46 PM	#19
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: The burbs new look. those subs look huge when there are lifted that thing is killer looking.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-21-2007, 06:02 AM	#20
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: The burbs new look. boostat4500 , how wide is the whell your runing and how lose to 38 15.50 did the tire come out . my 36 x 12.50 were 35 3/4 by 11. __________________ Earl 68 2500 4x4 GMC Burb

11-21-2007, 08:19 PM	#21
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The burbs new look. The wheels are 16x12. They are 37.5" tall. The tread is 12.5" wide and at the widest part off the side biters, just under 16" wide. Made my old BFG mud 35x12.5's look tiny. Did you have 11" of tread or is that the sidewall width? __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc. Last edited by boostat4500; 11-21-2007 at 08:20 PM.

11-21-2007, 09:27 PM	#22
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: The burbs new look. Thanks My tread was 11. Im trying to decide on new tires and cant make up my mind. I have been thining og going with 37 12.50 hummer tires but i odnt think they will be wide enough for me. __________________ Earl 68 2500 4x4 GMC Burb

11-21-2007, 11:28 PM	#23
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The burbs new look. How wide are you wanting? I actually wish mine were about an inch narrower. I didn't want this wide but got such a good deal on them, I couldn't resist. I don't like that they stick out past the fender. If I keep the truck, I might look into getting the axles narrowed. What kind of tires did you have? I've never seen a 12.50 with that much tread width. __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc. Last edited by boostat4500; 11-21-2007 at 11:29 PM.

11-22-2007, 09:11 AM	#24
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: The burbs new look. There a set of buck shots there not bad tires I just want them bigger and I like the wider look it doesnt bother me if they stick out past the fenders. I dont have a paint job to worry about. you need to check out the hummer tires if you dont want a wide tire they would not stick out so far I think changing you rims would fix the trouble easier then shorting the axles that is a $$$ thing to have done. Here is a set of 37 hummer tires on a truck you can see they are a true 37 tire. and they dont stick out past the fenders. http://67-72chevytrucks.com/vboard/s...d.php?t=261824 __________________ Earl 68 2500 4x4 GMC Burb Last edited by earl87gta; 11-22-2007 at 09:13 AM.

11-23-2007, 01:04 AM	#25
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The burbs new look. Changing rims would definetley be the easiest way to go. The problem is, I'm very,very picky about wheels on a truck. I've never had much luck finding wheels with options for the back spacing. Everything I found in a 16x12 were all 4 1/2" backspace. I'd love about a 5 1/2 or 6". Any suggestions on brands to look at? __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

Register or Log In To remove these advertisements.