8 foot fleetside bed in so. NJ, $375 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 08-16-2007, 11:05 PM

It's $375 to you guys. it is going on ebay and craigslist for more $ in one week if not sold here. TELL YOUR FRIENDS if you are local cause you ain't going to find one this solid around here.

This is a Chevy or GMC 8 foot fleetside truck bed. This is a real solid bed that I had been saving for myself as I always seem to have one of these projects going on, but I have come to realize that I am never going to get the time to finish my own projects. I'm selling a lot of stuff off this year. I got this bed off a texas truck that I had here years ago and I kept it under cover outside. the ugly paint you see is the original and will be easy to address when you want to re-finish it. It also has no lower body trim to deal with. the ONLY rust is pictured. there are no bubbles even starting over top the wheelwells and no rust on the underside of the wheelwells either. There is only minimal surface rust on the underside. If you stink at bodywork or just hate to do it this is a good bed for you to grab. Two minor dents is all that it has. There is no tailgate with this bed.
search my other sales for other 81-87 Gm pick up/Blazer /Burb parts.

I have pics of it, but too large to post here.

I added a right side filler door(dual tank model) for someone else on another bed I sold and I can do it again b/c I have a right filler door here. I do the welding,but NOT the bodywork.

I have another dented , but fairly solid, 8' bed that is not as nice, but still decent for someone on a low budget.$250

No dash pads or tailgates.

Call David at 856-678-7883 before 9PM
or email me at dbcrossy@verizon.net

LOCATED; In Pennsville, N.J. 08070. , NJ Routes 295, 40, 130,and 49 along with the NJ turpike all end right here in Pennsville at the base of the Delaware Memorial Bridge and I am only 5 minutes from the base of the bridge and easy to find.
I have been into 73-87 Gm full size trucks as my hobby for over 20 years, so if you are unsure about fit please call. I take calls much more serious than emails also.
thanx for taking a look.

blink32 · 08-18-2007, 10:23 PM

I would like to see pictures if possible. blink_32@hesslercomputing.com

**crossy** · 08-19-2007, 01:47 PM

had to go get some smaller pics that would load here. the only real rust is shown in close up. i have one more pic , but it is only of the small dent i described and you really can't see anything in the pic. thanx, crossy

I',m home all day today, for once. (sunday)

**crossy** · 08-24-2007, 09:56 AM

one last bump here on the forums before it goes elesewhere. some east coasters here on the forums is missing a good deal if he lets this one go. they are actually easy to transport. thanx , crossy

08-16-2007, 11:05 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	8 foot fleetside bed in so. NJ, $375 It's $375 to you guys. it is going on ebay and craigslist for more $ in one week if not sold here. TELL YOUR FRIENDS if you are local cause you ain't going to find one this solid around here. This is a Chevy or GMC 8 foot fleetside truck bed. This is a real solid bed that I had been saving for myself as I always seem to have one of these projects going on, but I have come to realize that I am never going to get the time to finish my own projects. I'm selling a lot of stuff off this year. I got this bed off a texas truck that I had here years ago and I kept it under cover outside. the ugly paint you see is the original and will be easy to address when you want to re-finish it. It also has no lower body trim to deal with. the ONLY rust is pictured. there are no bubbles even starting over top the wheelwells and no rust on the underside of the wheelwells either. There is only minimal surface rust on the underside. If you stink at bodywork or just hate to do it this is a good bed for you to grab. Two minor dents is all that it has. There is no tailgate with this bed. search my other sales for other 81-87 Gm pick up/Blazer /Burb parts. I have pics of it, but too large to post here. I added a right side filler door(dual tank model) for someone else on another bed I sold and I can do it again b/c I have a right filler door here. I do the welding,but NOT the bodywork. I have another dented , but fairly solid, 8' bed that is not as nice, but still decent for someone on a low budget.$250 No dash pads or tailgates. Call David at 856-678-7883 before 9PM or email me at dbcrossy@verizon.net LOCATED; In Pennsville, N.J. 08070. , NJ Routes 295, 40, 130,and 49 along with the NJ turpike all end right here in Pennsville at the base of the Delaware Memorial Bridge and I am only 5 minutes from the base of the bridge and easy to find. I have been into 73-87 Gm full size trucks as my hobby for over 20 years, so if you are unsure about fit please call. I take calls much more serious than emails also. thanx for taking a look. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-18-2007, 10:23 PM	#2
blink32 Registered User Join Date: Dec 2003 Location: OTR Posts: 338	Re: 8 foot fleetside bed in so. NJ, $375 I would like to see pictures if possible. blink_32@hesslercomputing.com

08-19-2007, 01:47 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 8 foot fleetside bed in so. NJ, $375 had to go get some smaller pics that would load here. the only real rust is shown in close up. i have one more pic , but it is only of the small dent i described and you really can't see anything in the pic. thanx, crossy I',m home all day today, for once. (sunday) Attached Images __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-24-2007, 09:56 AM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 8 foot fleetside bed in so. NJ, $375 one last bump here on the forums before it goes elesewhere. some east coasters here on the forums is missing a good deal if he lets this one go. they are actually easy to transport. thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.