Centerline Wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10addict · 08-22-2007, 02:09 PM

Whats up guys... Just a heads up for everyone, Centerline wheels has some killer deals out right now. If you go to there websight www.centerlinewheels.com and go to buy on line, look under vehicle and look for wheels marked overstock.
They have 18's for $159.00 20's for 169.00 and 22's for under $250.00
SMOKIN DEALS! I have no ties to them just want to see more C10's lookin good!

72 Cheyenne402 · 08-22-2007, 02:30 PM

I bought the Voltage wheels 18x8 and 20x8.8 I also had to turn down my rotors and pland on using wheel adaptors to get the correct backspacing in the rear

c10addict · 08-22-2007, 02:47 PM

ya I fought that battle with my 68... Once I put the spacers on it worked but the wheel doesnt have much lip.. Eventually I will order a set of custom offset wheels.. Mo money Mo Money!

72 Cheyenne402 · 08-22-2007, 03:17 PM

Quote:

Originally Posted by c10addict

ya I fought that battle with my 68... Once I put the spacers on it worked but the wheel doesnt have much lip.. Eventually I will order a set of custom offset wheels.. Mo money Mo Money!

What size spacers did you use and do you have any pics of your 68 to share? I'm trying to determing what size to get 1", 1.25" or 1.5"

c10addict · 08-22-2007, 03:46 PM

heres one pic of my 68.. Can not really see the wheels though. They are 6 lug torq thrust st's. Spaced rear wheels 1.5 inches. featured in Classic Trucks in June of 06 so dig through your past books Lol!! I have a bad magazine addiction too, I can never throw them out.. More pics to follow soon.

MyakkaJeff · 08-22-2007, 05:46 PM

c10addict- I would appreciate a close up of your side mirrors. Are they custom? If not where could I find them? Thanks, Jeff.

c10addict · 08-22-2007, 09:48 PM

I am only running 1 mirror on the drivers side. It is from Billet specialities.. I put 1 piece windows in the truck and it is mounted to the corner trim piece.. If it ever stops raining in pittsburgh I will send some good pics out..

72armyswbtruck · 08-23-2007, 05:23 AM

I love the stance of your truck c10addict

texanidiot25 · 08-23-2007, 06:04 AM

Yeh, http://www.centerlinewheels.com/wheel_deals.php < This is the overstock deals I believe he is talking about.

There are A LOT of killer deals on those rims, hope they last long enough for when ever I get around to ordering some

I rather like these smoothie rims:

stepside454 · 08-23-2007, 12:35 PM

& centerlines are not made in China....there made in california. hard to find a wheel trhats not made in China anymore

72 Cheyenne402 · 08-23-2007, 12:50 PM

[QUOTE=stepside454;2322559]& centerlines are not made in China....there made in california. hard to find a wheel trhats not made in China anymore[/QUOTE

I have some and they are made in california by ?????? but still made in the states. Here is a pic still need tires though.

08-22-2007, 02:09 PM	#1
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Centerline Wheels Whats up guys... Just a heads up for everyone, Centerline wheels has some killer deals out right now. If you go to there websight www.centerlinewheels.com and go to buy on line, look under vehicle and look for wheels marked overstock. They have 18's for $159.00 20's for 169.00 and 22's for under $250.00 SMOKIN DEALS! I have no ties to them just want to see more C10's lookin good! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 08-22-2007 at 02:14 PM. Reason: incorrect info on first post

08-22-2007, 02:30 PM	#2
72 Cheyenne402 Registered User Join Date: Feb 2005 Location: Texas Posts: 581	Re: Centerline Wheels I bought the Voltage wheels 18x8 and 20x8.8 I also had to turn down my rotors and pland on using wheel adaptors to get the correct backspacing in the rear __________________ 1972 Cheyenne 402 LWB 2005 Silverado X-Cab 5.3L 2004 John Deere L120 20HP B&S

08-22-2007, 02:47 PM	#3
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Centerline Wheels ya I fought that battle with my 68... Once I put the spacers on it worked but the wheel doesnt have much lip.. Eventually I will order a set of custom offset wheels.. Mo money Mo Money! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

08-22-2007, 03:46 PM	#5
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Centerline Wheels heres one pic of my 68.. Can not really see the wheels though. They are 6 lug torq thrust st's. Spaced rear wheels 1.5 inches. featured in Classic Trucks in June of 06 so dig through your past books Lol!! I have a bad magazine addiction too, I can never throw them out.. More pics to follow soon. Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 08-22-2007 at 03:49 PM. Reason: forgot info.. still new at this!

08-22-2007, 05:46 PM	#6
MyakkaJeff Junior Member Join Date: Dec 2006 Location: Florida, Myakka River Posts: 143	Re: Centerline Wheels c10addict- I would appreciate a close up of your side mirrors. Are they custom? If not where could I find them? Thanks, Jeff. __________________ '63 C10 lwb flatbed '66 C10 lwb stepside '68 C10 lwb stepside (parts) '68 C10 lwb fleetside (17 yr old son's ongoing project) '03 HUMMER H2 (wife's) '06 3500 flatbed liftgate (My work truck)

08-22-2007, 09:48 PM	#7
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Centerline Wheels I am only running 1 mirror on the drivers side. It is from Billet specialities.. I put 1 piece windows in the truck and it is mounted to the corner trim piece.. If it ever stops raining in pittsburgh I will send some good pics out.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

08-23-2007, 05:23 AM	#8
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Centerline Wheels I love the stance of your truck c10addict __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

08-23-2007, 06:04 AM	#9
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Centerline Wheels Yeh, http://www.centerlinewheels.com/wheel_deals.php < This is the overstock deals I believe he is talking about. There are A LOT of killer deals on those rims, hope they last long enough for when ever I get around to ordering some I rather like these smoothie rims:

08-23-2007, 12:35 PM	#10
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: Centerline Wheels & centerlines are not made in China....there made in california. hard to find a wheel trhats not made in China anymore __________________ 75 GMC C-15 short/step factory 454, lowered

08-23-2007, 12:50 PM	#11
72 Cheyenne402 Registered User Join Date: Feb 2005 Location: Texas Posts: 581	Re: Centerline Wheels [QUOTE=stepside454;2322559]& centerlines are not made in China....there made in california. hard to find a wheel trhats not made in China anymore[/QUOTE I have some and they are made in california by ?????? but still made in the states. Here is a pic still need tires though. __________________ 1972 Cheyenne 402 LWB 2005 Silverado X-Cab 5.3L 2004 John Deere L120 20HP B&S Last edited by 72 Cheyenne402; 08-23-2007 at 12:53 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.