67 1/2 ton, 67 cab, and more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Chevy4Life** · 08-25-2007, 05:32 PM

1967 small window longbed, very nice cab and doors. One small hole about the size of a half-dollar in each cab corner, otherwise rust free. 283/4 speed runs but smokes. Most of the interior is in the bed. Bent grille is in the bed I don't remember how bad it was. Those inner fenders are not originally off this truck and have rust I think. Bed full of parts (set of rough short fleet bedsides) $200

67 small window cab and doors- someone did a bad cab corner repair job. $50

67 3/4 front crossmember- new a arms, recently rebuilt. Power ram assist steering. Free

I have other little stuff that will go with the truck also (auto crossmembers, a/c controls, etc. etc...). I don't want to have scrap it, but it all has to be moved and I have no place to store it. The tailgate is gone now. I think there is one in the bed with some rust.

Also have a 1992 3/4 ton silverado in the 88-98 section. No motor or tranny (have all the TBI stuff and heads) $200

EVERTHING IS OBO AND MUST GO!!!!!
THANK YOU,
JAY

PICK UP ONLY.....15 Minutes North of St. George ,UT
I'll get pictures up ASAP

**Chevy4Life** · 08-27-2007, 10:56 PM

Pictures

**Chevy4Life** · 08-27-2007, 11:04 PM

more

**Chevy4Life** · 08-29-2007, 04:45 PM

Time is running out. someone take this stuff please

LUV2XCLR8 · 08-29-2007, 05:07 PM

Location bites me again

Mt Man Chad · 08-29-2007, 05:14 PM

Are you interested in selling any parts on it or only as a complete truck?

Alternator bracket, Single groove water pump pulley, steering wheel?

**Chevy4Life** · 08-29-2007, 08:28 PM

Quote:

Originally Posted by Mt Man Chad

Are you interested in selling any parts on it or only as a complete truck?

Alternator bracket, Single groove water pump pulley, steering wheel?

I really don't have time to part it out, but let me see what happens in the next couple days.
Thanks, Jay

Dova · 08-29-2007, 08:35 PM

how long would you be able to hold the 67' cab?

**67 cst swb** · 08-29-2007, 09:14 PM

how are the cab supports on both cabs?

**Chevy4Life** · 08-29-2007, 10:21 PM

Quote:

Originally Posted by Dova

how long would you be able to hold the 67' cab?

I can't store it. that's why it all has to go. sorry

**Chevy4Life** · 08-29-2007, 10:33 PM

Quote:

Originally Posted by 67 cst swb

how are the cab supports on both cabs?

The one on the frame only has couple small spots of rust in the cab corners the rest is rust free. I don't even think it is through on the drivers side. All the rust in the pictures is surface only. The supports and rockers are solid. The doors are rust free WITHOUT speaker holes. The other cab, It's been awhile since I tarped them up and I'd have to take a look. I don't remember seeing any rust just a bad patch on the corners.

I can get more pictures if needed.
Thanks,
Jay

**Chevy4Life** · 09-02-2007, 06:03 PM

ttt

centsless · 09-02-2007, 10:14 PM

Please put the truck in the trucks for sale section. I will leave the thread open for the parts.
Thanks!

08-25-2007, 05:32 PM	#1
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	67 1/2 ton, 67 cab, and more 1967 small window longbed, very nice cab and doors. One small hole about the size of a half-dollar in each cab corner, otherwise rust free. 283/4 speed runs but smokes. Most of the interior is in the bed. Bent grille is in the bed I don't remember how bad it was. Those inner fenders are not originally off this truck and have rust I think. Bed full of parts (set of rough short fleet bedsides) $200 67 small window cab and doors- someone did a bad cab corner repair job. $50 67 3/4 front crossmember- new a arms, recently rebuilt. Power ram assist steering. Free I have other little stuff that will go with the truck also (auto crossmembers, a/c controls, etc. etc...). I don't want to have scrap it, but it all has to be moved and I have no place to store it. The tailgate is gone now. I think there is one in the bed with some rust. Also have a 1992 3/4 ton silverado in the 88-98 section. No motor or tranny (have all the TBI stuff and heads) $200 EVERTHING IS OBO AND MUST GO!!!!! THANK YOU, JAY PICK UP ONLY.....15 Minutes North of St. George ,UT I'll get pictures up ASAP Last edited by Chevy4Life; 08-27-2007 at 11:23 PM. Reason: more info, lower prices

08-27-2007, 10:56 PM	#2
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: 67 1/2 ton, 67 cab, and more Pictures Attached Images

08-27-2007, 11:04 PM	#3
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: 67 1/2 ton, 67 cab, and more more Attached Images

08-29-2007, 04:45 PM	#4
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: 67 1/2 ton, 67 cab, and more Time is running out. someone take this stuff please

08-29-2007, 05:07 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: 67 1/2 ton, 67 cab, and more Location bites me again __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-29-2007, 05:14 PM	#6
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: 67 1/2 ton, 67 cab, and more Are you interested in selling any parts on it or only as a complete truck? Alternator bracket, Single groove water pump pulley, steering wheel? __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 08-29-2007 at 05:17 PM.

08-29-2007, 08:35 PM	#8
Dova Registered User Join Date: Jul 2007 Location: Silverdale, WA Posts: 263	Re: 67 1/2 ton, 67 cab, and more how long would you be able to hold the 67' cab?

08-29-2007, 09:14 PM	#9
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 67 1/2 ton, 67 cab, and more how are the cab supports on both cabs? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

09-02-2007, 06:03 PM	#12
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: 67 1/2 ton, 67 cab, and more ttt

09-02-2007, 10:14 PM	#13
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: 67 1/2 ton, 67 cab, and more Please put the truck in the trucks for sale section. I will leave the thread open for the parts. Thanks! __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.