I think there's somethin' wrong with my lockouts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 08-25-2007, 11:27 PM

Got the blazer home,the PO said the front hub on one side needs worked on...I grabbed hold of it and it turns completly around.

I don't know what to expect when I take the lockout off..I hope I can just get by with swapping out a lockout..What a shame,they are the original blue ones..I've got some mile marker ones somewhere...Will lockout hubs from a corp. 10 bolt fit on the dana 44?

62 short step · 08-26-2007, 09:14 AM

From what I've read before they should. Never personally tried it.

cobinder · 08-26-2007, 12:47 PM

Stepside, take a look at this diagram. If this is your hub there is only a a couple of reasons that it can turn all the way around. Hope this helps.

cobinder · 08-26-2007, 12:47 PM

Opps I mean this diagram.
http://www2.dana.com/pdf/5306-1.PDF

msgross · 08-26-2007, 02:37 PM

I have the set off my 68... You can probably use the guts and your outers and be original... Let me know...

Yes, any 1/2T Dana44 lockout will work on the 1/2T corp 10 and vice versa...

1969k10stepside · 08-26-2007, 09:41 PM

Thanks for the offer Mike..I think I'm just going to use the ones from the corp 10 bolt I got from the wrecked '79...
I took the blazer out and tried it..Both wheels were pulling with the hubs engaged and the one that spins all the way around in the proper spot where it should be to lock it in.

08-25-2007, 11:27 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	I think there's somethin' wrong with my lockouts Got the blazer home,the PO said the front hub on one side needs worked on...I grabbed hold of it and it turns completly around. I don't know what to expect when I take the lockout off..I hope I can just get by with swapping out a lockout..What a shame,they are the original blue ones..I've got some mile marker ones somewhere...Will lockout hubs from a corp. 10 bolt fit on the dana 44?

08-26-2007, 09:14 AM	#2
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: I think there's somethin' wrong with my lockouts From what I've read before they should. Never personally tried it.

08-26-2007, 12:47 PM	#3
cobinder Everything is work in progress Join Date: Apr 2006 Location: Denver Colorado Posts: 326	Re: I think there's somethin' wrong with my lockouts Stepside, take a look at this diagram. If this is your hub there is only a a couple of reasons that it can turn all the way around. Hope this helps. __________________ Good luck with your truck! How much?! It's just an old truck part!! 49 International on a 80 GMC 3/4ton 4x4 chassis 48 International KB-5 2 ton dump bed 04 Honda CRF "500" 09 Honda CRF450 fuel injected rocket 03 Suzuki hayabusa carbonfiber wheeled monster. 02 Ford diesel stretch van (toy hauler) 01 38' Monaco diesel pusher motorhome

08-26-2007, 12:47 PM	#4
cobinder Everything is work in progress Join Date: Apr 2006 Location: Denver Colorado Posts: 326	Re: I think there's somethin' wrong with my lockouts Opps I mean this diagram. http://www2.dana.com/pdf/5306-1.PDF __________________ Good luck with your truck! How much?! It's just an old truck part!! 49 International on a 80 GMC 3/4ton 4x4 chassis 48 International KB-5 2 ton dump bed 04 Honda CRF "500" 09 Honda CRF450 fuel injected rocket 03 Suzuki hayabusa carbonfiber wheeled monster. 02 Ford diesel stretch van (toy hauler) 01 38' Monaco diesel pusher motorhome

08-26-2007, 02:37 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: I think there's somethin' wrong with my lockouts I have the set off my 68... You can probably use the guts and your outers and be original... Let me know... Yes, any 1/2T Dana44 lockout will work on the 1/2T corp 10 and vice versa... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-26-2007, 09:41 PM	#6
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: I think there's somethin' wrong with my lockouts Thanks for the offer Mike..I think I'm just going to use the ones from the corp 10 bolt I got from the wrecked '79... I took the blazer out and tried it..Both wheels were pulling with the hubs engaged and the one that spins all the way around in the proper spot where it should be to lock it in. Last edited by 1969k10stepside; 08-26-2007 at 09:42 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.