project " little daisy" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 08-26-2007, 09:50 AM

Well I finally picked up another project that I am gonna build with my father in law,1956 chevy swb. I t has been stuck in this shop for 10 years and its a cali truck.. I am still going through the boxes of parts so I m still not sure of everything that I have but heres what I have so far. All new glass,new vdo guages,tilt column,b@m shifter,recovered bucket seats, paint ,primer and clear came with it. It has a nova front clip and rear with posi power steering and many boxes that I have not gotten to yet. 400 small block with a th400 tranny with b@m guts and pan. Well heres the pics not really sure what Im gonna do other than put it back together and drive it. Bed it perfect and only to spots of cancer on the whole truck....

FRENCHBLUE72 · 08-26-2007, 09:55 AM

We were told the truck would fire right up and run but that was not gonna happen so after the fireballs through the carb we went ahead and loaded it on the trailer. The drivers door in in the bed of the truck both doors have all ned guts still in the baggies from golden state pick-up parts.

FRENCHBLUE72 · 08-26-2007, 09:59 AM

The truck is loaded and ready to go to its new home...........

ChevyDude · 08-26-2007, 10:04 AM

Congratulations!!!! Those trucks look awesome when finished and done right! Looks like a really good start!

Alex

FRENCHBLUE72 · 08-26-2007, 10:07 AM

That box im looking into has all the new seals for the truck. the fire wall and door jambs are shot a mustang blue/green but the truck will be red when its done. Got her to fire up after some new plugs and setting up the points dizzy. The truck had suck a massive air leak that it sounded like crap,so I tore off the carb the guy just installed and he put the star washers down and then put the carb gasket on top and followed through by putting the carb on top of that

A new gasket and the washed on top of the carb and its runs and sounds great. Brakes still work and the posi has no problem lighting up both tires.

FRENCHBLUE72 · 08-26-2007, 10:10 AM

The guy even through in the engine stand.....

Lat of the pics for now gotta get out there as the sun is starting to come up..

mike nutt · 08-26-2007, 11:53 AM

luke , looks like a really nice project . will be an awesome truck when it's finished , red is the right choice for the color , well good luck with it. mike

Alan's Classic · 08-26-2007, 12:58 PM

I like it

CAL 58 GMC · 08-26-2007, 11:59 PM

Looks like a great project truck with alot of stuff already done.

Frizzle Fry · 08-27-2007, 12:10 AM

Nice score. I want a 55-59 one day!

PBFAB.COM · 08-27-2007, 12:32 AM

These are my favorite body style of trucks... I have a few with big plans... some day! Until then I just enjoy your guy's builds! Looks like a solid starting point.

72BlckButy · 08-27-2007, 08:38 AM

What a score! Why did they decide to get rid of the truck after all that work? Good luck on the build. Any idea's on the scope of the build?

FRENCHBLUE72 · 08-27-2007, 07:50 PM

The guy got rid of the truck because the wife likes to shop............ more progress..

FRENCHBLUE72 · 08-27-2007, 07:55 PM

Heres a few more progress pics tryin to get the sheet metal all covered in primer and looking for any hidden rust. The inner kick pannels are shot but someone already filled in the heater so the kick pannels will get filled also. Here are some of the goodies I got in a box. Check out those sweet vdos in the billet pannel...

FRENCHBLUE72 · 08-27-2007, 08:03 PM

New peep mirrors,new amber signals,new door strikers,new chrome door handles,new vent windows tinted blue,new door rubbers ,door gaskets,inner door handles,new chrome vent handles,new headlight gaskets,new door linkages... I under coated the inner fender wells.

FRENCHBLUE72 · 08-27-2007, 08:09 PM

Under coated inner fender and the new b@m air cleaner. Yes I know there is a glass fuel filter on ther but it was only to make sure I was getting fuel when I was trying to get her started. I also got the reprimed fender back on with some help..

FRENCHBLUE72 · 08-27-2007, 08:15 PM

anyone know where to get the patch pannels for these?? Also anyone have pictures of what the inner kick pannel should look like. CARNAGE!!!!!! to the finger..

FRENCHBLUE72 · 08-27-2007, 08:17 PM

Last pics for today...

FRENCHBLUE72 · 08-28-2007, 08:27 PM

Ordered my hinge pins and body patch pannels from wes at classic heartbeat today and went by the paint store and got some sanding supplys and some more under coating.....

FRENCHBLUE72 · 09-03-2007, 01:00 PM

Got my new hinge rebuild kit friday just need to fix the rust on the doors and rebuild the hinges... Also orederd the battery hold down and cab repair patch pannel. I got the new wind wings and glass(tinited blue) also had the chrome mouldings for the windows redone.. Pics to follow later today.

FRENCHBLUE72 · 09-15-2007, 03:03 AM

Pulled the drivers side fender off to fix the rust at the bottom lower hinge area and found out someone got creative witha hammer,not sure what or why they smashed in the outter kick vent area but here it is in all its smashed in glory....I tried to hammer it out from the inside but ended up haveing to cut and hammer it back flat.

FRENCHBLUE72 · 09-15-2007, 03:08 AM

Got the outter piece hammered and welded back in and shot it with some undercoating... On to the rust area at the bottom....

FRENCHBLUE72 · 09-15-2007, 03:11 AM

Patch pannel is welded in and just needs the back side boxed in. The last pic is a shot through the door hinge area before the rust was removed and cut out.

FRENCHBLUE72 · 09-15-2007, 03:15 AM

Welded up the old touneau cover holes and started the door work...

FRENCHBLUE72 · 09-16-2007, 08:16 PM

A few more pics from today..... Looks like its gonna need some cab corners someone repaired these years ago it looks like..

08-26-2007, 09:50 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	project " little daisy" Well I finally picked up another project that I am gonna build with my father in law,1956 chevy swb. I t has been stuck in this shop for 10 years and its a cali truck.. I am still going through the boxes of parts so I m still not sure of everything that I have but heres what I have so far. All new glass,new vdo guages,tilt column,b@m shifter,recovered bucket seats, paint ,primer and clear came with it. It has a nova front clip and rear with posi power steering and many boxes that I have not gotten to yet. 400 small block with a th400 tranny with b@m guts and pan. Well heres the pics not really sure what Im gonna do other than put it back together and drive it. Bed it perfect and only to spots of cancer on the whole truck.... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 09-30-2007 at 11:13 PM.

08-26-2007, 09:55 AM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" We were told the truck would fire right up and run but that was not gonna happen so after the fireballs through the carb we went ahead and loaded it on the trailer. The drivers door in in the bed of the truck both doors have all ned guts still in the baggies from golden state pick-up parts. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-26-2007, 09:59 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" The truck is loaded and ready to go to its new home........... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-26-2007, 10:04 AM	#4
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: project " little daisy" Congratulations!!!! Those trucks look awesome when finished and done right! Looks like a really good start! Alex __________________ Alex 1971 Lil' Red 350 SBC 700R4

08-26-2007, 10:07 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" That box im looking into has all the new seals for the truck. the fire wall and door jambs are shot a mustang blue/green but the truck will be red when its done. Got her to fire up after some new plugs and setting up the points dizzy. The truck had suck a massive air leak that it sounded like crap,so I tore off the carb the guy just installed and he put the star washers down and then put the carb gasket on top and followed through by putting the carb on top of that A new gasket and the washed on top of the carb and its runs and sounds great. Brakes still work and the posi has no problem lighting up both tires. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-26-2007, 10:10 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" The guy even through in the engine stand..... Lat of the pics for now gotta get out there as the sun is starting to come up.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-26-2007, 11:53 AM	#7
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: project " little daisy" luke , looks like a really nice project . will be an awesome truck when it's finished , red is the right choice for the color , well good luck with it. mike

08-26-2007, 12:58 PM	#8
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: project " little daisy" I like it __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-26-2007, 11:59 PM	#9
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: project " little daisy" Looks like a great project truck with alot of stuff already done. __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

08-27-2007, 12:10 AM	#10
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: project " little daisy" Nice score. I want a 55-59 one day!

08-27-2007, 12:32 AM	#11
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: project " little daisy" These are my favorite body style of trucks... I have a few with big plans... some day! Until then I just enjoy your guy's builds! Looks like a solid starting point. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

08-27-2007, 08:38 AM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: project " little daisy" What a score! Why did they decide to get rid of the truck after all that work? Good luck on the build. Any idea's on the scope of the build? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-27-2007, 07:50 PM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" The guy got rid of the truck because the wife likes to shop............ more progress.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-27-2007, 07:55 PM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Heres a few more progress pics tryin to get the sheet metal all covered in primer and looking for any hidden rust. The inner kick pannels are shot but someone already filled in the heater so the kick pannels will get filled also. Here are some of the goodies I got in a box. Check out those sweet vdos in the billet pannel... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 08-27-2007 at 07:56 PM.

08-27-2007, 08:03 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" New peep mirrors,new amber signals,new door strikers,new chrome door handles,new vent windows tinted blue,new door rubbers ,door gaskets,inner door handles,new chrome vent handles,new headlight gaskets,new door linkages... I under coated the inner fender wells. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

08-27-2007, 08:09 PM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Under coated inner fender and the new b@m air cleaner. Yes I know there is a glass fuel filter on ther but it was only to make sure I was getting fuel when I was trying to get her started. I also got the reprimed fender back on with some help.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-27-2007, 08:15 PM	#17
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" anyone know where to get the patch pannels for these?? Also anyone have pictures of what the inner kick pannel should look like. CARNAGE!!!!!! to the finger.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-27-2007, 08:17 PM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Last pics for today... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-28-2007, 08:27 PM	#19
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Ordered my hinge pins and body patch pannels from wes at classic heartbeat today and went by the paint store and got some sanding supplys and some more under coating..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-03-2007, 01:00 PM	#20
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Got my new hinge rebuild kit friday just need to fix the rust on the doors and rebuild the hinges... Also orederd the battery hold down and cab repair patch pannel. I got the new wind wings and glass(tinited blue) also had the chrome mouldings for the windows redone.. Pics to follow later today. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-15-2007, 03:03 AM	#21
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Pulled the drivers side fender off to fix the rust at the bottom lower hinge area and found out someone got creative witha hammer,not sure what or why they smashed in the outter kick vent area but here it is in all its smashed in glory....I tried to hammer it out from the inside but ended up haveing to cut and hammer it back flat. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 09-15-2007 at 03:04 AM.

09-15-2007, 03:08 AM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Got the outter piece hammered and welded back in and shot it with some undercoating... On to the rust area at the bottom.... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-15-2007, 03:11 AM	#23
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Patch pannel is welded in and just needs the back side boxed in. The last pic is a shot through the door hinge area before the rust was removed and cut out. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 09-15-2007 at 03:12 AM.

09-15-2007, 03:15 AM	#24
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" Welded up the old touneau cover holes and started the door work... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-16-2007, 08:16 PM	#25
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: project " little daisy" A few more pics from today..... Looks like its gonna need some cab corners someone repaired these years ago it looks like.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 09-30-2007 at 11:15 PM.

Register or Log In To remove these advertisements.