HUGE, but possibly cool project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 08-29-2007, 10:01 AM

Im cleaning house now that Im going to be down to only two trucks.

Ive been slowly getting parts together to build a 68 3/4 ton 4x4 50th. Please dont ask to be put in line for a particular part if I ever decide to sell it separately. That decision wont be made for awhile

Here is what I have so far.

1968 3/4 ton 4x4 50th matching frame, vins, build sheet and title in my name.
Three boxes, one with wood floor and tool box door.
Two tail gates, both decent and fixable.
I have matching front and rear out of a 72 3/4 ton 4x4...gives you disk brakes
A 71 turbo 350 and matching trans case.
Decent cab, but I think its a 69 or 70
Four doors
Complete 68 front clip, nice shape...I believe its rust free
One set of nice buddy buckets
Air dash cut across the slots
There is also a bunch of misc stuff I will toss in

My plans were to build an updated 50th anniversary truck but since I just acquired a nice 71 I wont be needing any of this.

If you have a serious interest in this stuff please arrange with me to come out and take a look at it. That will work much better than me posting a ton of pics online. I do have a couple of extra engines if you need one, but that would be worked out separately.

Remember this is not put together at all, its just stuff Ive been collecting.

$2000.00

Mark

**jerry moss** · 08-29-2007, 11:22 AM

sounds like a hell of a deal for someone, ttt for you.

CG · 08-29-2007, 09:47 PM

LOL...not even a sniff. Im pretty sure there is easily over 2 grand worth of parts.
The swap meet is coming soon anyway. Looks like Im going to have a trailer full of good stuff.

69RAT · 08-30-2007, 09:27 PM

sent you a pm

qksilver · 08-30-2007, 10:43 PM

are you teasing me?

CG · 08-31-2007, 01:24 AM

LOL...come and get it qksilver...

69RAT Im not sure, let me take a look and back to you this weekend on your question.

08-29-2007, 10:01 AM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,941	HUGE, but possibly cool project Im cleaning house now that Im going to be down to only two trucks. Ive been slowly getting parts together to build a 68 3/4 ton 4x4 50th. Please dont ask to be put in line for a particular part if I ever decide to sell it separately. That decision wont be made for awhile Here is what I have so far. 1968 3/4 ton 4x4 50th matching frame, vins, build sheet and title in my name. Three boxes, one with wood floor and tool box door. Two tail gates, both decent and fixable. I have matching front and rear out of a 72 3/4 ton 4x4...gives you disk brakes A 71 turbo 350 and matching trans case. Decent cab, but I think its a 69 or 70 Four doors Complete 68 front clip, nice shape...I believe its rust free One set of nice buddy buckets Air dash cut across the slots There is also a bunch of misc stuff I will toss in My plans were to build an updated 50th anniversary truck but since I just acquired a nice 71 I wont be needing any of this. If you have a serious interest in this stuff please arrange with me to come out and take a look at it. That will work much better than me posting a ton of pics online. I do have a couple of extra engines if you need one, but that would be worked out separately. Remember this is not put together at all, its just stuff Ive been collecting. $2000.00 Mark Last edited by CG; 08-29-2007 at 10:05 AM.

08-29-2007, 11:22 AM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,899	Re: HUGE, but possibly cool project sounds like a hell of a deal for someone, ttt for you. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-29-2007, 09:47 PM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,941	Re: HUGE, but possibly cool project LOL...not even a sniff. Im pretty sure there is easily over 2 grand worth of parts. The swap meet is coming soon anyway. Looks like Im going to have a trailer full of good stuff.

08-30-2007, 09:27 PM	#4
69RAT Registered User Join Date: Apr 2006 Location: hopeless in Washington Posts: 105	Re: HUGE, but possibly cool project sent you a pm __________________ '69 Chevy CST#'s 396/TH400, A/C

08-30-2007, 10:43 PM	#5
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: HUGE, but possibly cool project are you teasing me?

08-31-2007, 01:24 AM	#6
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,941	Re: HUGE, but possibly cool project LOL...come and get it qksilver... 69RAT Im not sure, let me take a look and back to you this weekend on your question. Last edited by CG; 08-31-2007 at 01:25 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.