SM 465 Dust shield WTB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eedgell · 09-02-2007, 03:22 PM

I need a dust shield or fly wheel cover for a 1971 SM 465 4 speed. If you have, please post cost of part and shipping to zip 81401. Thanks.

JimKshortstep4x4 · 09-02-2007, 08:40 PM

If you just need the lower piece and not the flat plate, I have one. Shipped to your address for $15.

Jim

eedgell · 09-03-2007, 03:48 PM

Quote:

Originally Posted by JimKshortstep4x4

If you just need the lower piece and not the flat plate, I have one. Shipped to your address for $15.

Jim

I'm not sure what all I need. Is it all a two piece unit? Right now the flywheel is completely exposed on the bottom. Can you PM me a picture, or post one?

JimKshortstep4x4 · 09-04-2007, 08:53 PM

Here is a picture of the lower cover that I have.

Jim

eedgell · 09-04-2007, 09:16 PM

Is this a one piece unit, or does this cover still need another piece to make it complete?

JimKshortstep4x4 · 09-05-2007, 07:55 AM

I only have the lower piece. I do not have the flat plate that goes around the starter.

Jim

eedgell · 09-05-2007, 11:16 PM

I found the two piece set. That will work better for me. Thank you for you reply. Much appreciated!

09-02-2007, 03:22 PM	#1
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	SM 465 Dust shield WTB I need a dust shield or fly wheel cover for a 1971 SM 465 4 speed. If you have, please post cost of part and shipping to zip 81401. Thanks. __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

09-02-2007, 08:40 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: SM 465 Dust shield WTB If you just need the lower piece and not the flat plate, I have one. Shipped to your address for $15. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

09-04-2007, 08:53 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: SM 465 Dust shield WTB Here is a picture of the lower cover that I have. Jim Attached Images __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

09-04-2007, 09:16 PM	#5
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: SM 465 Dust shield WTB Is this a one piece unit, or does this cover still need another piece to make it complete? __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

09-05-2007, 07:55 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: SM 465 Dust shield WTB I only have the lower piece. I do not have the flat plate that goes around the starter. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC Last edited by JimKshortstep4x4; 09-05-2007 at 07:58 AM. Reason: Changed wording

09-05-2007, 11:16 PM	#7
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: SM 465 Dust shield WTB I found the two piece set. That will work better for me. Thank you for you reply. Much appreciated! __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.