Q's about '67 stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cowman · 09-03-2007, 11:01 PM

I just got on here and I gotta say It's good to be here. I'm starting a '67 LWB stepside project and I got a couple of questions. Do the front springs need to be changed when going from a 250 6 cyl to a stock 283? Next- I don't know if my truck came with a front sway bar or not. Would one help with regular, stock tires on the front as far as the driving goes? Thanks for any help.

L0WRIDE · 09-03-2007, 11:55 PM

welcome to the boards from new zealand

shaneschevys · 09-04-2007, 01:21 AM

Welcome from FT Worth TX.

Americanrider · 09-04-2007, 01:34 AM

No spring change needed & if it had a sway bar it would be listed on the glove box option sheet. If the sheet is gone look for mounting brackets on the underside of the front frame rails. They did have sway bars in 67 but normaly came on high optioned trucks like the camper special rigs. Post up some pics & get er' done!

Welcome aboard!

jsbgump · 09-04-2007, 01:44 AM

Welcome to the board from Texas

krue · 09-04-2007, 07:49 AM

Welcome to the board from South Mississippi!

bad6772 · 09-04-2007, 05:28 PM

welcome from indiana

Ironhead · 09-04-2007, 10:15 PM

Welcome from northern PA.

Stepside65 · 09-04-2007, 11:54 PM

Welcome from blazin New Mexico.

GREASEMONKEY72 · 09-05-2007, 12:03 AM

WELCOME to the board

**Ron 586** · 09-05-2007, 02:14 PM

Welcome to the board from West Tennessee.

**1971K54X4** · 09-05-2007, 04:16 PM

from Iowa

LUV2XCLR8 · 09-06-2007, 06:31 PM

From West TN

CAL 58 GMC · 09-08-2007, 03:29 AM

Welcome from Central Califronia

Truckracer · 09-08-2007, 08:11 AM

Welome - as was said before, the springs will be fine.

72BlckButy · 09-10-2007, 08:42 AM

to the board from Mid-MO!!!

CJ5 Convert · 09-12-2007, 01:13 AM

Welcome from sunny New Mexico

09-03-2007, 11:01 PM	#1
cowman Registered User Join Date: Sep 2007 Location: Buckhead Ga. Posts: 7	Q's about '67 stepside I just got on here and I gotta say It's good to be here. I'm starting a '67 LWB stepside project and I got a couple of questions. Do the front springs need to be changed when going from a 250 6 cyl to a stock 283? Next- I don't know if my truck came with a front sway bar or not. Would one help with regular, stock tires on the front as far as the driving goes? Thanks for any help.

09-03-2007, 11:55 PM	#2
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Q's about '67 stepside welcome to the boards from new zealand __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

09-04-2007, 01:21 AM	#3
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Q's about '67 stepside Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

09-04-2007, 01:34 AM	#4
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: Q's about '67 stepside No spring change needed & if it had a sway bar it would be listed on the glove box option sheet. If the sheet is gone look for mounting brackets on the underside of the front frame rails. They did have sway bars in 67 but normaly came on high optioned trucks like the camper special rigs. Post up some pics & get er' done! Welcome aboard!

09-04-2007, 01:44 AM	#5
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Q's about '67 stepside Welcome to the board from Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

09-04-2007, 07:49 AM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Q's about '67 stepside Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

09-04-2007, 05:28 PM	#7
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Q's about '67 stepside welcome from indiana

09-04-2007, 10:15 PM	#8
Ironhead Registered User Join Date: Feb 2007 Location: Westfield, Tioga County) Pennsylvania Posts: 113	Re: Q's about '67 stepside Welcome from northern PA. __________________ Ironhead Mike '68 Panel 402BB '84 Shortbox 4X4 '85 Blazer '97 Silverado Ext. Cab

09-04-2007, 11:54 PM	#9
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: Q's about '67 stepside Welcome from blazin New Mexico. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

09-05-2007, 12:03 AM	#10
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Q's about '67 stepside WELCOME to the board __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

09-05-2007, 02:14 PM	#11
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: Q's about '67 stepside Welcome to the board from West Tennessee. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

09-05-2007, 04:16 PM	#12
1971K54X4 Member Join Date: Jan 2007 Location: Manchester, Iowa Posts: 1,493	Re: Q's about '67 stepside from Iowa __________________ Korey 1955 Bel Air 2 door hardtop 1971 Blazer 4x4 1973 Z-28 Prostreet

09-06-2007, 06:31 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Q's about '67 stepside From West TN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-08-2007, 03:29 AM	#14
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Q's about '67 stepside Welcome from Central Califronia __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

09-08-2007, 08:11 AM	#15
Truckracer Registered User Join Date: Sep 2007 Location: Norman, Oklahoma Posts: 18	Re: Q's about '67 stepside Welome - as was said before, the springs will be fine. __________________ 23t Altered..



Register or Log In To remove these advertisements.

09-10-2007, 08:42 AM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Q's about '67 stepside to the board from Mid-MO!!! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-12-2007, 01:13 AM	#17
CJ5 Convert Registered User Join Date: May 2007 Location: Las Cruces, NM Posts: 1,079	Re: Q's about '67 stepside Welcome from sunny New Mexico __________________ - Jason *Orange Crush - 1969 K5 Blazer CST 4WD MONEY PIT* 1975 CJ5 Renegade - Levi's Edition - 304 V8 original paint

Register or Log In To remove these advertisements.