dang it, dang it, my door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OlChev67 · 09-08-2007, 07:10 PM

so, last night we went out for a ride and all was going well until I gave a guy in an old bronco a jump start. we were driving down a long dirt road and he was dead in the road. gave him a jump (note to self, I need good batt. cables mine stink) so we all ride down to a little paved parking lot near the lake. I leave the truck running and pull the park brake (bad idea should have cut it off and leave it in gear) to get out and talk to the guys in the bronco. as soon as I get up to their truck, I hear my friend hollering and look back to see my truck up against the curb. walk over and see the drivers side door backwards.... cuss...cusss...cuss. dang it. It had rolled backwards and hit a little guardrail thing with the door open, but it could have been worse, the door stopped the truck from goin into the lake. at least I get a good excuse to skip work and go to the junkyard to get me a good door. thought I could do a little hammer work and knock it out a little, but its hard to get to the huge dent. my fender isnt bad at all thank goodness.. just door.. it still closes with some force and opens the same with a hard shoulder into it, and the window still rolls down. shot a little paint over the chipped off pieces.

OlChev67 · 09-08-2007, 07:12 PM

rattle can it.

cdowns · 09-08-2007, 08:04 PM

it could of been alot worse you could of been driving down the road at speed and needing a working emergency brake killed yourself

bad6772 · 09-08-2007, 09:27 PM

man that sucks..... well at least nobody was hurt..id get new OR used hinges why i was at it.....good luck on finding a good door that one looked pretty darn good

**72 Super** · 09-08-2007, 10:07 PM

it could have been alot worst as others said.hope you can find a good door and get it fixed.

67ChevyRedneck · 09-08-2007, 10:12 PM

Check the cab for damage too, you may have to tug it out a hair....

That really sucks

We had a day with 40+ mph winds one day long ago back in NY and the wind took my door from my hand and opened it for me after I started to open it...

Didn't do as much damage as yours, but it dinged the door on the fender a bit and I had to pull the door and weld the giant crack that opened above the top hinge

But back then my truck was in primer, so some spray can work and it looked new again

"67"StepSide · 09-08-2007, 10:26 PM

DUDE

THAT SUCKS!!!! SORRY

OlChev67 · 09-08-2007, 10:40 PM

yeah, I am still kickin myself about it. but I know theres a junkyard around here that have a few of our trucks in it. gonna try to check it out this week, gotta see what the grumpy old man wants for a door. If he wants to be a jerk, I am going back to my parents house soon and scavenge the junkyards there.

sleepyboy · 09-08-2007, 10:48 PM

You can hardly see it...Been there, done that... I was a potty mouth for a while...

Brock · 09-09-2007, 01:22 AM

That just stinks.

Wish you were closer I've got an extra door (its GMC, and a little rusted on the bottom but it doesn't have that big dent in it) that I'd give ya.

Good luck, hope nothing else is screwed up, at least a door is a fairly easy fix.

RyanG · 09-09-2007, 02:51 AM

Dude,

That really sucks......sorry about the luck.

blukangoo · 09-09-2007, 02:59 AM

Kinda makes you never want to stop and help somebody driving a F**d.

Good luck getting it fixed. I hope for you it´s just the door and there is not anything wrong with the cab or the fender.

OlChev67 · 09-16-2007, 08:48 PM

well, I got me a door.
I called the old man at the junkyard up here and he priced me $125. screw that, because I called the upullit back near my folks house and they said $35
, so I went home saturday morning and went shoppin. I wish I had my camera in the junkyard, saw some cool stuff. There were about 6 of our trucks including a 4x4 (no tow hooks). I walked around for about an hour before I decided which door I wanted. it has a few dents and some rust at the bottom, but it was the best one there, and it was already off the truck.
The window actually rolls up easier than my old one and the spot where the hinge bolts to the door isnt ripped out and booger fixed, like mine was. did some quick sanding and spray bombing and good as new, haha almost. I just wanted to get it on. still need to adjust it a little and fix the piece that keeps the door from opening too far. I just wanted to get it on the truck, so will fix more stuff as I get time. I used black paint on the inside, because I ran out of blue, and I was in the mood to paint.

OlChev67 · 09-16-2007, 08:53 PM

door on the truck, need some more rattle cans. and second pic is the damage to the fender, I am glad it wasnt worse

cdowns · 09-16-2007, 09:03 PM

you got right on fixen the door did you bother to fix the brakes? i would ov done that first

OlChev67 · 09-16-2007, 09:06 PM

yeah, fixed the park brake the day after I busted the door.

Cyclone44 · 09-16-2007, 09:13 PM

I'm glad you got another door, I felt bad for you when I saw that first picture, My poor old Dad ( who is not with us anymore) did the same thing years ago while helping someone, (doing a good deed) His door looked just like yours did. I'm glad you were able to fix your truck. George

09-08-2007, 07:10 PM	#1
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	dang it, dang it, my door so, last night we went out for a ride and all was going well until I gave a guy in an old bronco a jump start. we were driving down a long dirt road and he was dead in the road. gave him a jump (note to self, I need good batt. cables mine stink) so we all ride down to a little paved parking lot near the lake. I leave the truck running and pull the park brake (bad idea should have cut it off and leave it in gear) to get out and talk to the guys in the bronco. as soon as I get up to their truck, I hear my friend hollering and look back to see my truck up against the curb. walk over and see the drivers side door backwards.... cuss...cusss...cuss. dang it. It had rolled backwards and hit a little guardrail thing with the door open, but it could have been worse, the door stopped the truck from goin into the lake. at least I get a good excuse to skip work and go to the junkyard to get me a good door. thought I could do a little hammer work and knock it out a little, but its hard to get to the huge dent. my fender isnt bad at all thank goodness.. just door.. it still closes with some force and opens the same with a hard shoulder into it, and the window still rolls down. shot a little paint over the chipped off pieces. Attached Images

09-08-2007, 07:12 PM	#2
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: dang it, dang it, my door rattle can it. Attached Images

09-08-2007, 08:04 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: dang it, dang it, my door it could of been alot worse you could of been driving down the road at speed and needing a working emergency brake killed yourself __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-08-2007, 09:27 PM	#4
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: dang it, dang it, my door man that sucks..... well at least nobody was hurt..id get new OR used hinges why i was at it.....good luck on finding a good door that one looked pretty darn good

09-08-2007, 10:07 PM	#5
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: dang it, dang it, my door it could have been alot worst as others said.hope you can find a good door and get it fixed. __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

09-08-2007, 10:12 PM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: dang it, dang it, my door Check the cab for damage too, you may have to tug it out a hair.... That really sucks We had a day with 40+ mph winds one day long ago back in NY and the wind took my door from my hand and opened it for me after I started to open it... Didn't do as much damage as yours, but it dinged the door on the fender a bit and I had to pull the door and weld the giant crack that opened above the top hinge But back then my truck was in primer, so some spray can work and it looked new again __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 09-08-2007 at 10:13 PM.

09-08-2007, 10:26 PM	#7
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	Re: dang it, dang it, my door DUDE THAT SUCKS!!!! SORRY

09-08-2007, 10:40 PM	#8
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: dang it, dang it, my door yeah, I am still kickin myself about it. but I know theres a junkyard around here that have a few of our trucks in it. gonna try to check it out this week, gotta see what the grumpy old man wants for a door. If he wants to be a jerk, I am going back to my parents house soon and scavenge the junkyards there.

09-08-2007, 10:48 PM	#9
sleepyboy '69 Step Join Date: Mar 2005 Location: Marion, Texas Posts: 722	Re: dang it, dang it, my door You can hardly see it...Been there, done that... I was a potty mouth for a while... __________________ It's my truck, and Yes, I CUT the dash, so what??

09-09-2007, 01:22 AM	#10
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	Re: dang it, dang it, my door That just stinks. Wish you were closer I've got an extra door (its GMC, and a little rusted on the bottom but it doesn't have that big dent in it) that I'd give ya. Good luck, hope nothing else is screwed up, at least a door is a fairly easy fix. __________________ 68 stepside, short-box, multi-colored (for now)

09-09-2007, 02:51 AM	#11
RyanG Registered User Join Date: Feb 2006 Location: Gilbert, Az Posts: 180	Re: dang it, dang it, my door Dude, That really sucks......sorry about the luck.

09-09-2007, 02:59 AM	#12
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: dang it, dang it, my door Kinda makes you never want to stop and help somebody driving a F**d. Good luck getting it fixed. I hope for you it´s just the door and there is not anything wrong with the cab or the fender. __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

09-16-2007, 08:48 PM	#13
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: dang it, dang it, my door well, I got me a door. I called the old man at the junkyard up here and he priced me $125. screw that, because I called the upullit back near my folks house and they said $35 , so I went home saturday morning and went shoppin. I wish I had my camera in the junkyard, saw some cool stuff. There were about 6 of our trucks including a 4x4 (no tow hooks). I walked around for about an hour before I decided which door I wanted. it has a few dents and some rust at the bottom, but it was the best one there, and it was already off the truck. The window actually rolls up easier than my old one and the spot where the hinge bolts to the door isnt ripped out and booger fixed, like mine was. did some quick sanding and spray bombing and good as new, haha almost. I just wanted to get it on. still need to adjust it a little and fix the piece that keeps the door from opening too far. I just wanted to get it on the truck, so will fix more stuff as I get time. I used black paint on the inside, because I ran out of blue, and I was in the mood to paint. Attached Images

09-16-2007, 08:53 PM	#14
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: dang it, dang it, my door door on the truck, need some more rattle cans. and second pic is the damage to the fender, I am glad it wasnt worse Attached Images

09-16-2007, 09:03 PM	#15
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: dang it, dang it, my door you got right on fixen the door did you bother to fix the brakes? i would ov done that first __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

09-16-2007, 09:06 PM	#16
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: dang it, dang it, my door yeah, fixed the park brake the day after I busted the door.

09-16-2007, 09:13 PM	#17
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: dang it, dang it, my door I'm glad you got another door, I felt bad for you when I saw that first picture, My poor old Dad ( who is not with us anymore) did the same thing years ago while helping someone, (doing a good deed) His door looked just like yours did. I'm glad you were able to fix your truck. George

Register or Log In To remove these advertisements.