some parts sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Fast68Chevy* · 09-30-2002, 03:55 AM

- 250 engine mount frame trees pairs
- pass side 292 tree(driver side is same as 250)
- L-6 cyl engine bock mount brackets pairs
- SBC V-8 frame trees pairs
- other 6 cyl engine parts also
- '55-68(-'72 truck) V-8 short pump pullies stuff
-oil pans

- '64-72 various leaf and coil rear truck chassis/frame parts and disc and drum related parts
- 5 lug 12 bolt axle shaft pairs
- good dana 60 3/4 ton axle for parts or whole, 4.56 and powrlok, 30 spline
- long water pump a/c brackets set for 454, etc.
- V-8 HEI distributor
- 69-72 guages dash, no bezel
- 67 CST dash knobs
- assorted 68-72 CST dash knobs
- NOS 292 emblem with GM box
-1971 Chevrolet dealer communication inventory cleanup/sales kit with box, stil in pretty good shape, alot of goodies including films and some 45-records and some pamphlets and so forth
- big 1979 Honda CM/CB400 motorcycle service book with original large three ring binder and wiring diagrams, etc
- big block front springs
- std front springs
- front control arms for disc brake trucks, some for 71-72 and others for 73-up
- front control arms for drum brake trucks
- '64-87 engine cradles
- pair of 5 lug 15" GM older painted wagons
- pair of 6 lug 15" GM older painted wagons(both pairs accept the GM truck rally wheel caps and screws)
- matched set of four older small nosed truck rally wheel caps
- 4x4 203/th350/dana 44 frotnt driveshafts
- clutch linkage parts of all kinds including frame mounted idler pivot bracket and block mounted idler ball pivot brackets, some for L-6 and some for SBC, no pedal assemblies right now though.
- '73-up 454 frame trees pair( about 1" shorter than others)
- 72 4x4 blazer rear driveshaft

thatll work for now, if are interested in aything thne lemmew know and i can give details that you may want to know

thanks

frisky68 · 09-30-2002, 02:27 PM

I'm looking for a set for my 69 SWB step

Michael A. K. G · 09-30-2002, 04:11 PM

Quote:

Originally posted by Fast68Chevy

- other 6 cyl engine parts also

I discovered that Nova air filter housings don't work on our trucks. At least not if you have power brakes.

Do you have an unmodified air filter housing for a 250 with power brakes? That's the offset type.

llama · 09-30-2002, 06:17 PM

hey randy, i do need the cross member that goes right behind the cab and the shock mount brackets for the rear. also a 454 oil pan. still working on the box jeff

*Fast68Chevy* · 10-01-2002, 03:50 PM

Quote:

Originally posted by frisky68
I'm looking for a set for my 69 SWB step

sorry, dont have anymore of them right now :S

thans

*Fast68Chevy* · 10-01-2002, 03:52 PM

Quote:

Originally posted by Michael A. K. G

I discovered that Nova air filter housings don't work on our trucks. At least not if you have power brakes.

Do you have an unmodified air filter housing for a 250 with power brakes? That's the offset type.

Mike, no, i did have one but got tired of tripping on it so i scrapped it, i may have a 10" or so diameter factory '68 250 straight install cleaner assembly, but thats about it right now, sorry :S

*Fast68Chevy* · 10-01-2002, 03:59 PM

addd few more items 11:04 pm 10/02/02:

-69-up 4x4 p/s box, $60 and some mail.

'71-up dana 44 front with 3.07 and also all steering linkages and related parts and sway bar and all... $125 for axle and $75 for sway bar setup and $80 for leaves packs with load leveler leaves intact

-5 lug 12 bolt axle shafts pair $30
-drums $15 pair
-12 bolt 3.07 posi carrier, '75 or so- '81 unit $75
-12 bolt 3.07 gear set $25
-flywheels and flexplates, 25 and 15
-tall tranny tunnel pan for 67-72 2wd 4 speed $25
-various driveshafts one and two piece- $25 each,
- manual trans flywheel inspection cover sets, $20 each set, for 72 and older trucks
- various kickdown cables and dipstick tubes, $5
-73-80 complete cab wiring harness for auto trans and a/c trucks $35

-85 burb receiver hitch $23
-73-87 pickup real heavy reciever hitch $28
-manual trans cast iron thre bolt nosed starters, $15 each
-SM318 tranny, $20
-newer replacement 6 cyl manifolds and head, etc
-some 73-87 windshields $25 each
-'64-'72 40" spring pack centers- 12 bolt truck rear posi axle housing, minus brake backing plates, $15

entire front third of a '73-87 rolling big block 3/4 ton 2wd chevy truck chassis in good shape, good for converting to disc brakes on 64-70 trucks, $50 or part out for BB springs and cradle and all control arms and spindles and rotors and so forth,

spindles and arms and rotors can be mailed, i have extra rotors and shields also.,

also have a nice 2wd p/s gear box $40 plus mail,. wil remove andmail the sector shaft for use on 4x4 crossover conversion if you want., $30 plus the ride

74 tilt column in super excellent clean shape, $50 plus ride, steering wheel in same nice shape, $30 plus ride,.

pair of 56" 8-leaf spring packs $45 plus ride, also U bolts and related too

pair of '64-72 cast iron rear axle tube U bolt leaf clamps $20 and ride, other related parts too including leaf packs and original overload packs and such.

72 1/2 ton 2wd front disc brake entire assembly, parts or whole, good for converting 64-70 trucks to disc brakes.,

manual steering box for most all '68-older 4x4 and all 2wd '64-87 $25 and ride

pair of optional 5 lug GM painted wagons, and pair of optional 6 lug GM painted wagons, both pairs accept GM truck rally caps and are 15" $25 a pair

set of four 73-75 small nose truck rally wheel caps, screws on outside, these arent the common '76-86 rally caps you see around, but are very close to same. $40/all four

more to add as i stumble across it....
thanks

*Fast68Chevy* · 10-01-2002, 04:01 PM

Quote:

Originally posted by llama
hey randy, i do need the cross member that goes right behind the cab and the shock mount brackets for the rear. also a 454 oil pan. still working on the box jeff

Jeff-
xmember and shock mounts for what year and what rear supension and for 2wd or 4x4 ?
i have shock mount brackets for lower of coil rears and upper ones for leaf rear 64-72's

454 oil pan, hmm, dunno about that one, depends on if i part the 454 engine out, hate to though, its a rebuilt low miles one.,,,,
no biggie on the bed, only one other person is interested in it if you arent, its up to you...

thanks

llama · 10-01-2002, 09:37 PM

sent you a pm

*Fast68Chevy* · 10-02-2002, 01:10 AM

Jeff, ok, got one sent back at ya

thanks

llama · 10-02-2002, 05:53 AM

sent pm

my67c20 · 10-02-2002, 05:47 PM

How much for the HEI distributor and wiper arms

jjk3 · 10-02-2002, 08:56 PM

How much for the 72 1/2 ton 2wd front disc brake entire assembly? Also, does the manual steering box for '68-older need to be rebuilt?

bigchevy66@hotmail.com

*Fast68Chevy* · 10-03-2002, 07:24 PM

Quote:

Originally posted by my67c20
How much for the HEI distributor and wiper arms

45 and mail ?? you mean actual arms assemblies for the blades or the arms under the cowl panel ?

thanks

*Fast68Chevy* · 10-03-2002, 07:26 PM

Quote:

Originally posted by jjk3
How much for the 72 1/2 ton 2wd front disc brake entire assembly? Also, does the manual steering box for '68-older need to be rebuilt?

bigchevy66@hotmail.com

ive got a couple different boxes, both seem to be tight no slop,
35 for front entire assembly with cradle and all(cut frame rails behind shocks) ?

TODDS 72 · 10-03-2002, 07:33 PM

RANDY
PRICE ON 6 CYL. MANIFOLDS??
THANKS TODD.

*Fast68Chevy* · 10-03-2002, 09:38 PM

sent ya PM
thanks Todd

chevynut · 05-29-2003, 05:13 AM

Do you still have the Dana 60 rear with coil springs?
Is it a full floater?
Are the axles held on by bolts or studs with nuts?

I am need of a 30 spline axle held on by stud/nuts and can't find one around here.

Let me know

thanks, Mike

my67c20 · 05-29-2003, 04:10 PM

Sorry already got one have to pass.

mikeoj · 05-29-2003, 07:57 PM

Welcome Back !

Wootdog · 05-29-2003, 09:07 PM

been awhile Bubba. Wootdog

67_SS396 · 05-29-2003, 09:14 PM

Take a look at the dates. Fast (randy) isn't back.

Wootdog · 05-29-2003, 10:18 PM

Wish he was. He is well versed in this hobby, and or obsession. Wootdog

09-30-2002, 03:55 AM	#1
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	some parts sale - 250 engine mount frame trees pairs - pass side 292 tree(driver side is same as 250) - L-6 cyl engine bock mount brackets pairs - SBC V-8 frame trees pairs - other 6 cyl engine parts also - '55-68(-'72 truck) V-8 short pump pullies stuff -oil pans - '64-72 various leaf and coil rear truck chassis/frame parts and disc and drum related parts - 5 lug 12 bolt axle shaft pairs - good dana 60 3/4 ton axle for parts or whole, 4.56 and powrlok, 30 spline - long water pump a/c brackets set for 454, etc. - V-8 HEI distributor - 69-72 guages dash, no bezel - 67 CST dash knobs - assorted 68-72 CST dash knobs - NOS 292 emblem with GM box -1971 Chevrolet dealer communication inventory cleanup/sales kit with box, stil in pretty good shape, alot of goodies including films and some 45-records and some pamphlets and so forth - big 1979 Honda CM/CB400 motorcycle service book with original large three ring binder and wiring diagrams, etc - big block front springs - std front springs - front control arms for disc brake trucks, some for 71-72 and others for 73-up - front control arms for drum brake trucks - '64-87 engine cradles - pair of 5 lug 15" GM older painted wagons - pair of 6 lug 15" GM older painted wagons(both pairs accept the GM truck rally wheel caps and screws) - matched set of four older small nosed truck rally wheel caps - 4x4 203/th350/dana 44 frotnt driveshafts - clutch linkage parts of all kinds including frame mounted idler pivot bracket and block mounted idler ball pivot brackets, some for L-6 and some for SBC, no pedal assemblies right now though. - '73-up 454 frame trees pair( about 1" shorter than others) - 72 4x4 blazer rear driveshaft thatll work for now, if are interested in aything thne lemmew know and i can give details that you may want to know thanks Last edited by Fast68Chevy; 09-30-2002 at 04:09 AM.

09-30-2002, 02:27 PM	#2
frisky68 Registered User Join Date: Sep 2002 Location: Plymouth, IN Posts: 133	rear trailing arms I'm looking for a set for my 69 SWB step __________________ 94 K1500 SWB w/ 4" body and suspension lift

09-30-2002, 06:17 PM	#4
llama Senior Member Join Date: Jul 2002 Location: northern IL. Posts: 263	frame parts hey randy, i do need the cross member that goes right behind the cab and the shock mount brackets for the rear. also a 454 oil pan. still working on the box jeff

10-01-2002, 03:59 PM	#7
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	addition of a few more things: addd few more items 11:04 pm 10/02/02: -69-up 4x4 p/s box, $60 and some mail. '71-up dana 44 front with 3.07 and also all steering linkages and related parts and sway bar and all... $125 for axle and $75 for sway bar setup and $80 for leaves packs with load leveler leaves intact -5 lug 12 bolt axle shafts pair $30 -drums $15 pair -12 bolt 3.07 posi carrier, '75 or so- '81 unit $75 -12 bolt 3.07 gear set $25 -flywheels and flexplates, 25 and 15 -tall tranny tunnel pan for 67-72 2wd 4 speed $25 -various driveshafts one and two piece- $25 each, - manual trans flywheel inspection cover sets, $20 each set, for 72 and older trucks - various kickdown cables and dipstick tubes, $5 -73-80 complete cab wiring harness for auto trans and a/c trucks $35 -85 burb receiver hitch $23 -73-87 pickup real heavy reciever hitch $28 -manual trans cast iron thre bolt nosed starters, $15 each -SM318 tranny, $20 -newer replacement 6 cyl manifolds and head, etc -some 73-87 windshields $25 each -'64-'72 40" spring pack centers- 12 bolt truck rear posi axle housing, minus brake backing plates, $15 entire front third of a '73-87 rolling big block 3/4 ton 2wd chevy truck chassis in good shape, good for converting to disc brakes on 64-70 trucks, $50 or part out for BB springs and cradle and all control arms and spindles and rotors and so forth, spindles and arms and rotors can be mailed, i have extra rotors and shields also., also have a nice 2wd p/s gear box $40 plus mail,. wil remove andmail the sector shaft for use on 4x4 crossover conversion if you want., $30 plus the ride 74 tilt column in super excellent clean shape, $50 plus ride, steering wheel in same nice shape, $30 plus ride,. pair of 56" 8-leaf spring packs $45 plus ride, also U bolts and related too pair of '64-72 cast iron rear axle tube U bolt leaf clamps $20 and ride, other related parts too including leaf packs and original overload packs and such. 72 1/2 ton 2wd front disc brake entire assembly, parts or whole, good for converting 64-70 trucks to disc brakes., manual steering box for most all '68-older 4x4 and all 2wd '64-87 $25 and ride pair of optional 5 lug GM painted wagons, and pair of optional 6 lug GM painted wagons, both pairs accept GM truck rally caps and are 15" $25 a pair set of four 73-75 small nose truck rally wheel caps, screws on outside, these arent the common '76-86 rally caps you see around, but are very close to same. $40/all four more to add as i stumble across it.... thanks Last edited by Fast68Chevy; 10-02-2002 at 02:20 AM.

10-01-2002, 09:37 PM	#9
llama Senior Member Join Date: Jul 2002 Location: northern IL. Posts: 263	pm sent you a pm

10-02-2002, 01:10 AM	#10
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	Jeff, ok, got one sent back at ya thanks Last edited by Fast68Chevy; 10-02-2002 at 02:21 AM.

10-02-2002, 05:53 AM	#11
llama Senior Member Join Date: Jul 2002 Location: northern IL. Posts: 263	pm sent pm

10-02-2002, 05:47 PM	#12
my67c20 Registered User Join Date: Jun 2002 Location: Tucson AZ by way of WI & CA Posts: 510	How much for the HEI distributor and wiper arms

10-02-2002, 08:56 PM	#13
jjk3 It's just a check engine lamp. Join Date: Apr 2001 Location: Melbourne, FL Posts: 311	How much for the 72 1/2 ton 2wd front disc brake entire assembly? Also, does the manual steering box for '68-older need to be rebuilt? bigchevy66@hotmail.com __________________ Active Inliner---bigchevy66 68 SWB Stepside 250 L6/3 on the floor/ Hedman headers, HEI, MSD 6A box, K&N filter, Offy intake and Edelbrock 600cfm 4 barrel Soon to have: WC T-5 five speed 66 SWB Stepside-undergoing restoration

10-03-2002, 07:33 PM	#16
TODDS 72 Not the nightly winner Join Date: Jul 2002 Location: CHARLEMONT MA.USA Posts: 763	RANDY PRICE ON 6 CYL. MANIFOLDS?? THANKS TODD. __________________ 72C10SWB BLUE 350/350 86K10LWB BLUE 5.7 700r4 7.5' fisher plow 93S10XCAB4X4 BLUE 4.3 4L60e 69gmc c10 v8 3 on the tree yellow 72k10 swb 350 3 on the tree green 86k15 swb5.0L 4spd brown

10-03-2002, 09:38 PM	#17
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	sent ya PM thanks Todd

05-29-2003, 05:13 AM	#18
chevynut Registered User Join Date: Sep 2000 Location: Tampa, FL. USA Posts: 171	Do you still have the Dana 60 rear with coil springs? Is it a full floater? Are the axles held on by bolts or studs with nuts? I am need of a 30 spline axle held on by stud/nuts and can't find one around here. Let me know thanks, Mike __________________ Mike 1989 C1500 SWB Reg Cab 2003 Chevy Tahoe Z-71 70 Camaro RS/SS - 454

05-29-2003, 04:10 PM	#19
my67c20 Registered User Join Date: Jun 2002 Location: Tucson AZ by way of WI & CA Posts: 510	Sorry already got one have to pass.

05-29-2003, 07:57 PM	#20
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Welcome Back ! __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

05-29-2003, 09:07 PM	#21
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Glad to see you here Fast been awhile Bubba. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT



Register or Log In To remove these advertisements.

05-29-2003, 09:14 PM	#22
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Take a look at the dates. Fast (randy) isn't back. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

05-29-2003, 10:18 PM	#23
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	you are right Wish he was. He is well versed in this hobby, and or obsession. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

Register or Log In To remove these advertisements.