First Question Post - What would you do if you... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tcb-1 · 09-11-2007, 08:02 PM

had an area of rust on the floorboard to this extent. Not bad at all and only bubbled through the first layer of paint, but since I do not plan on doing a full resto for a few years, I want it sealed. I am also going back to the black rubber mat that this truck had originally. I want to be confident that once I lay the mat down the rust has stopped growing. This is the only rust this truck has, but I want to treat it now (and correctly) so I won't see more in a few years.

POR-15? Eastwood's 3 part frame resto system? Any help would be appreciated. Sorry, it may be a no brainer question, but I wanted to ask the experts.

Thank you!!

Pics of drivers floorboard:

glock35ipsc · 09-11-2007, 08:17 PM

Wire wheel the heck out of it and do the POR-15.

72highlander · 09-11-2007, 08:19 PM

ospho will take care of the rust and prevent future rust, then you can seal it with something like por-15

kbs71 · 09-11-2007, 10:47 PM

Try here...http://www.kbs-coatings.com/index.aspx

here's a $10.00 discout coupon.

72armyswbtruck · 09-11-2007, 11:02 PM

OK so what is KBS?

Longhorn Man · 09-11-2007, 11:19 PM

I'd grind it all down, paint, rust, all of it, and go with POR.

kbs71 · 09-12-2007, 02:58 PM

72army it,s just another one of the prolific anti-rust/rust preventive companies out there. You can get a sample package with their 3 step process for like $18.00 plus $8.00 shipping. It covers @ 12.5 sq/ft. I've used it and it holds up pretty good.

Musclerodz · 09-12-2007, 03:06 PM

Treat the metal with a phosphate conversion coating to kill any live rust and prime and paint. That floor is boiler plate compared to some.

Mike

09-11-2007, 08:02 PM	#1
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	First Question Post - What would you do if you... had an area of rust on the floorboard to this extent. Not bad at all and only bubbled through the first layer of paint, but since I do not plan on doing a full resto for a few years, I want it sealed. I am also going back to the black rubber mat that this truck had originally. I want to be confident that once I lay the mat down the rust has stopped growing. This is the only rust this truck has, but I want to treat it now (and correctly) so I won't see more in a few years. POR-15? Eastwood's 3 part frame resto system? Any help would be appreciated. Sorry, it may be a no brainer question, but I wanted to ask the experts. Thank you!! Pics of drivers floorboard:

09-11-2007, 08:17 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: First Question Post - What would you do if you... Wire wheel the heck out of it and do the POR-15. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-11-2007, 08:19 PM	#3
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: First Question Post - What would you do if you... ospho will take care of the rust and prevent future rust, then you can seal it with something like por-15 __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

09-11-2007, 10:47 PM	#4
kbs71 71 rustless in texas Join Date: Aug 2004 Location: Houston, TX Posts: 257	Re: First Question Post - What would you do if you... Try here...http://www.kbs-coatings.com/index.aspx here's a $10.00 discout coupon. Attached Images __________________ "The secret to creativity is knowing how to hide your sources." "No one really listens to anyone else, and if you try it for a while you'll see why" 71 C-10 LWB presently in a perpetual state of disassembly '96 Toyota (my work car) '04 Mustang Convertable (wife's car & other money pit) Latest aquesition and why my trucks still in the garage covered with junk.. 2010 Aqua Blue metallic 6 speed Manual LS3 2SS/RS Camaro (I want one of these in my truck FAQ here VENDORS here SUPPORT THE BOARD here My second favorite SITE

09-11-2007, 11:02 PM	#5
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: First Question Post - What would you do if you... OK so what is KBS? __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

09-11-2007, 11:19 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: First Question Post - What would you do if you... I'd grind it all down, paint, rust, all of it, and go with POR.

09-12-2007, 02:58 PM	#7
kbs71 71 rustless in texas Join Date: Aug 2004 Location: Houston, TX Posts: 257	Re: First Question Post - What would you do if you... 72army it,s just another one of the prolific anti-rust/rust preventive companies out there. You can get a sample package with their 3 step process for like $18.00 plus $8.00 shipping. It covers @ 12.5 sq/ft. I've used it and it holds up pretty good. __________________ "The secret to creativity is knowing how to hide your sources." "No one really listens to anyone else, and if you try it for a while you'll see why" 71 C-10 LWB presently in a perpetual state of disassembly '96 Toyota (my work car) '04 Mustang Convertable (wife's car & other money pit) Latest aquesition and why my trucks still in the garage covered with junk.. 2010 Aqua Blue metallic 6 speed Manual LS3 2SS/RS Camaro (I want one of these in my truck FAQ here VENDORS here SUPPORT THE BOARD here My second favorite SITE

09-12-2007, 03:06 PM	#8
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: First Question Post - What would you do if you... Treat the metal with a phosphate conversion coating to kill any live rust and prime and paint. That floor is boiler plate compared to some. Mike __________________ Mike Redpath



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.