WTB:Manual Crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 09-13-2007, 06:03 AM

I`m going with a M22 in my 2wd project and need a manual crossmember that most guys pull to install autos.I have my auto crossmember to trade if that fits the bill.Or,I will buy one if anyone has one or a frame to yank it frame for me.I guess within pick up distance would be best,but not absolutely a must.

**special-K** · 09-15-2007, 07:05 AM

Bump!

70GMCer · 09-15-2007, 07:38 AM

I'll see if I still have mine.......

**Don Brace** · 09-15-2007, 08:24 AM

What is the difference between the turbo 400 cross member and one for a stick?

Blue_71 · 09-15-2007, 01:09 PM

ive got one tim-- and a box to ship it in (my auto crossmember came in the box

had to get a auto crossmember for the 5 speed going in the 71 c10) how does $35 plus shipping sound? ill weigh it this afternoon when i get back home

**uncle** · 09-15-2007, 01:12 PM

Are you using a cast iron or alum. bell housing? If aluminum,I think you can use an automatic x-member.

**special-K** · 09-16-2007, 07:50 AM

Thanks all.I have a local offer(pm`d).I`m not sure at the moment on these offers,don`t give up yet.
The manuals used what was actually a rear engine mount/crossmember and nothing where the autos do.
I`m getting the complete M22 conversion today.I`ll see which bell housing I get,hadn`t considered that.I`ll get back to this this evening when I know exactly what I have.It`s the bellhousing to yoke w/clutch for $500.It looks ok,but pops out of 4th,I think.Includes rebuild kit.It`ll need a trip to the tranny shop.I need to see about the shift lever that`ll put it where I want it and away from the buddy buckets.May do some fabbing there.The shifter is new.

**Classic Bowties** · 09-16-2007, 02:37 PM

Special, that is a heck of a deal on a M22 even if needing a little work. I am a for hire wrench once in awhile and just so happen to be doing a manual to auto conversion for a local guy here in town. He purchased all the auto conversion parts from me along with the th350 trans and factory truck tilt and here is the deal, he gave me the manual trans and all the related manual parts that I removed so I can pass that same deal along to you. If you end up needing this manual truck style crossmember, I can ship it out to you for only the cost of the ride. Lmk, Cb

**special-K** · 09-16-2007, 11:07 PM

Well,these are great offers,thanks.It turns out I got the V8(aluminum) bellhousing in the deal and won`t need to change crossmembers afterall.I thouht he had the cast iron 6cyl bellhousing.He had,like,three set-ups there when I looked.I got cofused what came with it.

09-13-2007, 06:03 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	WTB:Manual Crossmember I`m going with a M22 in my 2wd project and need a manual crossmember that most guys pull to install autos.I have my auto crossmember to trade if that fits the bill.Or,I will buy one if anyone has one or a frame to yank it frame for me.I guess within pick up distance would be best,but not absolutely a must. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-15-2007, 07:05 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: WTB:Manual Crossmember Bump! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-15-2007, 07:38 AM	#3
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: WTB:Manual Crossmember I'll see if I still have mine....... __________________ 1997 GMC Sierra Ext 1965 Mustang

09-15-2007, 08:24 AM	#4
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: WTB:Manual Crossmember What is the difference between the turbo 400 cross member and one for a stick? __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

09-15-2007, 01:12 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: WTB:Manual Crossmember Are you using a cast iron or alum. bell housing? If aluminum,I think you can use an automatic x-member.

09-16-2007, 07:50 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: WTB:Manual Crossmember Thanks all.I have a local offer(pm`d).I`m not sure at the moment on these offers,don`t give up yet. The manuals used what was actually a rear engine mount/crossmember and nothing where the autos do. I`m getting the complete M22 conversion today.I`ll see which bell housing I get,hadn`t considered that.I`ll get back to this this evening when I know exactly what I have.It`s the bellhousing to yoke w/clutch for $500.It looks ok,but pops out of 4th,I think.Includes rebuild kit.It`ll need a trip to the tranny shop.I need to see about the shift lever that`ll put it where I want it and away from the buddy buckets.May do some fabbing there.The shifter is new. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-16-2007, 02:37 PM	#8
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,569	Re: WTB:Manual Crossmember Special, that is a heck of a deal on a M22 even if needing a little work. I am a for hire wrench once in awhile and just so happen to be doing a manual to auto conversion for a local guy here in town. He purchased all the auto conversion parts from me along with the th350 trans and factory truck tilt and here is the deal, he gave me the manual trans and all the related manual parts that I removed so I can pass that same deal along to you. If you end up needing this manual truck style crossmember, I can ship it out to you for only the cost of the ride. Lmk, Cb Attached Images Last edited by Classic Bowties; 09-16-2007 at 04:40 PM. Reason: forgot pic

09-16-2007, 11:07 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: WTB:Manual Crossmember Well,these are great offers,thanks.It turns out I got the V8(aluminum) bellhousing in the deal and won`t need to change crossmembers afterall.I thouht he had the cast iron 6cyl bellhousing.He had,like,three set-ups there when I looked.I got cofused what came with it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.