Parting out 72 C20 in Green Bay, WI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71big block · 09-17-2007, 07:19 PM

I am parting out a 72 C20, I bought it for the box. PM me with your needs and I'll get pics.

Angelse68cal · 09-17-2007, 07:53 PM

I would like to see the 2 front fenders. ANd A price....I am kinda hopin for no rust rot or bondo

02_GMC_97_FIII · 09-17-2007, 08:33 PM

What's the condition/color of the interior parts, ie seat, door panels, arm rests, etc. Seeing you're rather close I'll have to think of what else I need for my '72.

Thanks,
Matt

buffle · 09-17-2007, 08:36 PM

Need all the guts out of drivers door. No glass no wing window just door opening and latch hardware and window regulator. Have a 72 that someone put a 67-71 door on and I want to run 72 door panels so I need all the long posts for inside handles.

cypressbog · 09-17-2007, 08:41 PM

I'd be interested in looking at the doors, I'm close too

OldSkool71 · 09-17-2007, 09:26 PM

if it is a 350 engine and has a/c i need the rear adjuster bracket?

71big block · 09-17-2007, 09:43 PM

I will trade the Chevy tailgate in decent shape for a GMC one

67_C20Pres · 09-17-2007, 09:56 PM

I might be interested in the steering drag link & control arms for the 8 lug disc setup I'm working on. My zip is 89108 (Vegas). I know that's it's a long piece to ship but not that heavy. My house is considered as a business address with FedEx & UPS so shipping is a little less with them. You can PM me with a price or post it. Thanks, Steve

**68350** · 09-17-2007, 10:30 PM

how about some engine bay and interior pictures? what motor? thanks

RJGeister · 09-18-2007, 06:27 AM

I am interested in the side mirror(s). Don't know if you have the passenger side. Are the turn signals and rear tail light and reverse sockets in good shape? Are they tight so far as wneh you put a bulb in, it doesn't turn when installed.

Thanks,
Rich

72gord · 09-18-2007, 08:26 AM

Whats the cab like? All 4 mounts good and just need rockers? corners? Let me know and how much? Thanks

Smittys 3600 · 09-18-2007, 08:51 PM

I was interested in the differential. Do you know the gearing?

Thanks

Brian

timzrides · 09-18-2007, 09:11 PM

interested in tailgate

tshaw72low · 09-18-2007, 11:06 PM

Put me next in line for front fenders, left/right would like to see closer pic's of them if you can..

Thanks
Tommy

71big block · 09-21-2007, 09:41 PM

ttt

Smittys 3600 · 09-21-2007, 11:26 PM

Still interested in differential if it is available.

Cyclone44 · 09-22-2007, 12:23 AM

If nobody is in line for the outer grille shell post a price and picture and shipping to 37918..Thanks George

71big block · 09-22-2007, 06:20 PM

Requested pics Name: 72 pics 001.jpg
Views: 232
Size: 54.1 KB

Name: 72 pics 002.jpg
Views: 233
Size: 43.2 KB

Name: 72 pics 003.jpg
Views: 221
Size: 55.1 KB

Name: 72 pics 004.jpg
Views: 222
Size: 76.4 KB

Name: 72 pics 005.jpg
Views: 227
Size: 31.6 KB

71big block · 09-22-2007, 06:24 PM

Name: 72 pics 006.jpg
Views: 223
Size: 44.7 KB

Name: 72 pics 007.jpg
Views: 215
Size: 51.3 KB

Name: 72 pics 008.jpg
Views: 224
Size: 44.2 KB

Name: 72 pics 009.jpg
Views: 221
Size: 44.4 KB

Name: 72 pics 010.jpg
Views: 216
Size: 62.4 KB

71big block · 09-22-2007, 06:27 PM

Name: 72 pics 011.jpg
Views: 222
Size: 38.5 KB

Name: 72 pics 012.jpg
Views: 213
Size: 38.0 KB

Name: 72 pics 013.jpg
Views: 217
Size: 63.1 KB

Name: 72 pics 014.jpg
Views: 211
Size: 53.4 KB

Name: 72 pics 015.jpg
Views: 213
Size: 48.0 KB

71big block · 09-22-2007, 06:32 PM

Name: 72 pics 016.jpg
Views: 210
Size: 43.4 KB

Name: 72 pics 017.jpg
Views: 210
Size: 36.0 KB

Name: 72 pics 018.jpg
Views: 207
Size: 43.7 KB

Name: 72 pics 020.jpg
Views: 206
Size: 55.0 KB

Name: 72 pics 021.jpg
Views: 180
Size: 66.3 KB

71big block · 09-22-2007, 06:36 PM

Name: 72 pics 022.jpg
Views: 197
Size: 34.1 KB

Name: 72 pics 023.jpg
Views: 194
Size: 35.8 KB

Name: 72 pics 024.jpg
Views: 200
Size: 37.0 KB

Name: 72 pics 025.jpg
Views: 195
Size: 42.3 KB

Name: 72 pics 026.jpg
Views: 192
Size: 61.7 KB

71big block · 09-22-2007, 06:40 PM

Name: 72 pics 028.jpg
Views: 193
Size: 53.8 KB

Name: 72 pics 029.jpg
Views: 189
Size: 50.4 KB

Name: 72 pics 030.jpg
Views: 190
Size: 49.0 KB

Name: 72 pics 031.jpg
Views: 190
Size: 63.5 KB

Name: 72 pics 032.jpg
Views: 191
Size: 39.2 KB

71big block · 09-22-2007, 06:43 PM

Name: 72 pics 036.jpg
Views: 193
Size: 59.6 KB

Name: 72 pics 037.jpg
Views: 189
Size: 38.3 KB

Name: 72 pics 038.jpg
Views: 185
Size: 65.2 KB

Name: 72 pics 039.jpg
Views: 184
Size: 34.8 KB

Name: misc pics 021.jpg
Views: 198
Size: 50.1 KB

panhandler62 · 09-22-2007, 11:10 PM

Selling the kids too? :P

Any idea on price/shipping for the spindles, rotors, calipers and attendent brackets and whatnots attached there?

25401

09-17-2007, 07:19 PM	#1
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Parting out 72 C20 in Green Bay, WI I am parting out a 72 C20, I bought it for the box. PM me with your needs and I'll get pics. Attached Images __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-17-2007, 07:53 PM	#2
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: Parting out 72 C20 in Green Bay, WI I would like to see the 2 front fenders. ANd A price....I am kinda hopin for no rust rot or bondo

09-17-2007, 08:33 PM	#3
02_GMC_97_FIII Registered User Join Date: Dec 2004 Location: Mequon, WI Posts: 186	Re: Parting out 72 C20 in Green Bay, WI What's the condition/color of the interior parts, ie seat, door panels, arm rests, etc. Seeing you're rather close I'll have to think of what else I need for my '72. Thanks, Matt __________________ '72 Chevy C10 Shortbox, 350/TH350 '08 Chevy Trailblazer SS 6.0L AWD 400HP

09-17-2007, 08:36 PM	#4
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: Parting out 72 C20 in Green Bay, WI Need all the guts out of drivers door. No glass no wing window just door opening and latch hardware and window regulator. Have a 72 that someone put a 67-71 door on and I want to run 72 door panels so I need all the long posts for inside handles.

09-17-2007, 08:41 PM	#5
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Parting out 72 C20 in Green Bay, WI I'd be interested in looking at the doors, I'm close too

09-17-2007, 09:26 PM	#6
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: Parting out 72 C20 in Green Bay, WI if it is a 350 engine and has a/c i need the rear adjuster bracket? __________________ -Ron-

09-17-2007, 09:43 PM	#7
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI I will trade the Chevy tailgate in decent shape for a GMC one __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-17-2007, 09:56 PM	#8
67_C20Pres New Member Join Date: May 2007 Location: Las Vegas Posts: 33	Re: Parting out 72 C20 in Green Bay, WI I might be interested in the steering drag link & control arms for the 8 lug disc setup I'm working on. My zip is 89108 (Vegas). I know that's it's a long piece to ship but not that heavy. My house is considered as a business address with FedEx & UPS so shipping is a little less with them. You can PM me with a price or post it. Thanks, Steve __________________ Steve 67' C20 - Newest - My junkyard dog and work in progress

09-17-2007, 10:30 PM	#9
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting out 72 C20 in Green Bay, WI how about some engine bay and interior pictures? what motor? thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

09-18-2007, 06:27 AM	#10
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: Parting out 72 C20 in Green Bay, WI I am interested in the side mirror(s). Don't know if you have the passenger side. Are the turn signals and rear tail light and reverse sockets in good shape? Are they tight so far as wneh you put a bulb in, it doesn't turn when installed. Thanks, Rich

09-18-2007, 08:26 AM	#11
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Re: Parting out 72 C20 in Green Bay, WI Whats the cab like? All 4 mounts good and just need rockers? corners? Let me know and how much? Thanks

09-18-2007, 08:51 PM	#12
Smittys 3600 Registered User Join Date: Sep 2007 Location: Yorkville IL Posts: 27	Re: Parting out 72 C20 in Green Bay, WI I was interested in the differential. Do you know the gearing? Thanks Brian

09-18-2007, 09:11 PM	#13
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Re: Parting out 72 C20 in Green Bay, WI interested in tailgate

09-18-2007, 11:06 PM	#14
tshaw72low Registered User Join Date: Apr 2007 Location: East, Tennessee Posts: 54	Re: Parting out 72 C20 in Green Bay, WI Put me next in line for front fenders, left/right would like to see closer pic's of them if you can.. Thanks Tommy

09-21-2007, 09:41 PM	#15
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI ttt __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"



Register or Log In To remove these advertisements.

09-21-2007, 11:26 PM	#16
Smittys 3600 Registered User Join Date: Sep 2007 Location: Yorkville IL Posts: 27	Re: Parting out 72 C20 in Green Bay, WI Still interested in differential if it is available.

09-22-2007, 12:23 AM	#17
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out 72 C20 in Green Bay, WI If nobody is in line for the outer grille shell post a price and picture and shipping to 37918..Thanks George

09-22-2007, 06:20 PM	#18
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI Requested pics __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-22-2007, 06:24 PM	#19
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-22-2007, 06:27 PM	#20
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-22-2007, 06:32 PM	#21
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-22-2007, 06:36 PM	#22
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-22-2007, 06:40 PM	#23
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-22-2007, 06:43 PM	#24
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Parting out 72 C20 in Green Bay, WI __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-22-2007, 11:10 PM	#25
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,763	Re: Parting out 72 C20 in Green Bay, WI Selling the kids too? :P Any idea on price/shipping for the spindles, rotors, calipers and attendent brackets and whatnots attached there? 25401 __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

Register or Log In To remove these advertisements.