measurement please, and bounce question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cochino12 · 09-26-2007, 09:56 PM

I'm trying to figure out how many inches the PO cut off the springs in my blazer and was hoping someone could measure front fender hieght as well as the overall height of their front tires.

I'm guessing he cut about 4" out, could that be why it is so bouncy? well that and the worn out shocks? Thanks for any help

Adam

f.monroe · 09-26-2007, 11:45 PM

I had stock replacement coils and it was too high . Ride was nice . I cut one coil off and it dropped between 2 and 2.5 inches . Rode like crap . I ordered Belltech 1" drop coils . Sits nice , rides like a Cadillac . Frank

09-26-2007, 09:56 PM	#1
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	measurement please, and bounce question I'm trying to figure out how many inches the PO cut off the springs in my blazer and was hoping someone could measure front fender hieght as well as the overall height of their front tires. I'm guessing he cut about 4" out, could that be why it is so bouncy? well that and the worn out shocks? Thanks for any help Adam __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

09-26-2007, 11:45 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: measurement please, and bounce question I had stock replacement coils and it was too high . Ride was nice . I cut one coil off and it dropped between 2 and 2.5 inches . Rode like crap . I ordered Belltech 1" drop coils . Sits nice , rides like a Cadillac . Frank __________________ Born and proudly residing in a Red State !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.