07 yukon/tahoe leather 3rd row install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

epsorenson · 09-30-2007, 11:54 AM

esteemed blazer gurus,
i'm going to buy a black leather 07 50/50 3rd row today for my 71.
need some advice/tips on this venture.
particularly on how they will mount, not sure what mounting plates?
the newer modells have the mounts recessed so they don't stick up.

one guy suggested going to the junk yard and torching out the entire piece on a new tahoe and then grafting it in to the blazer.
(i'd like to take the pathway of least resistance but still make it nice)

anyone have any previous experience? pics? anything?

thanks in advance.

JWPOORE · 09-30-2007, 01:11 PM

Hopfully someone will have done this and will have the answers for you. I have been inquiring about this for months and months and still I have not found anyone who has actually completed this with these seats. I have a set as well that came out of a 00-06 Tahoe that I want to install. I have only seen pictures of installed sets prior to these years so far.

crzngmychvy · 09-30-2007, 01:29 PM

I was going to go the same route but changed my mind. I like the lower backrest of the 90s 3rd row seats, and it matched my fronts.

Heres the link for the install. If you go to the next page you can see it with all the interior.

my blazer interior

crzngmychvy · 09-30-2007, 01:32 PM

Quote:

Originally Posted by JWPOORE

Hopfully someone will have done this and will have the answers for you. I have been inquiring about this for months and months and still I have not found anyone who has actually completed this with these seats. I have a set as well that came out of a 00-06 Tahoe that I want to install. I have only seen pictures of installed sets prior to these years so far.

I think Kyle has those seats in his, not sure though:

http://67-72chevytrucks.com/vboard/s...=198386&page=8

usual510 · 09-30-2007, 01:35 PM

My friend bolted 2x4's on the original holes then attached new mounts to it,and covered it back with carpet. It looked pretty nice. Also did that with a newer model seats in the front.

epsorenson · 10-01-2007, 05:09 PM

ok boyz...here they are...just purchased brand spankin new today, never even sat in! (seats were removed by custom limo company)

these are actually 2007 escalade black leather seats!

second row captains chairs are going in the front (driver/passenger)...both fold forward for rear entry. i'll be sticking with lap belts for this application because captains don't have integrated belts as you can tell.

third row is pretty standard.

paid $800 total which i don't think is a bad deal at all.

now for the tricky part....installation

cstanley · 10-01-2007, 05:50 PM

Wow! 800 Is A Steal! ANY IDEA HOW ADJUSTABLE THE 2ND ROWS ARE? UP/DOWN, FWD/BACK? RECLINE? THEY WOULD BE ABOUT PERFECT IF THEY HAD THAT 3-POINT BELT...
HOPE YOU POST PROGRESS AND HOW-TO.

epsorenson · 10-01-2007, 06:09 PM

Quote:

Originally Posted by cstanley

THEY WOULD BE ABOUT PERFECT IF THEY HAD THAT 3-POINT BELT...

yeah i had looked for the sierra/silverado front seat in the extended cab trucks because it had the integrated belt and rear access features but just couldn't find em new leather.

plus i couldn't pass up this smokin deal!

i don't mind using the lap belts anyhow. don't want to get an accident with the lap belt but "it is what it is". that's what i'm runnin now anyways.

JWPOORE · 10-01-2007, 07:14 PM

Considering what those 50/50 3rd rows can go for on Ebay, I would say that you did well and they are brand new to boot! Hopefully you can (me too!) find a good and cost effecient way to mount up those seats in the back without breaking the bank or a major modification.

va_tlc · 10-01-2007, 09:22 PM

wow that was a killer deal ya got.. there should look great in yr blazer. good luck with the install. im sure some of the blazer pros will jump in and get ya in the rite direction..

epsorenson · 10-01-2007, 11:25 PM

Jtrux · 10-02-2007, 01:02 AM

Damn what made you want to take out your old ones, they are all nice

epsorenson · 10-02-2007, 10:53 AM

Quote:

Originally Posted by Jtrux

Damn what made you want to take out your old ones, they are all nice

basically my wife...she wants me to put in the third row w/integrated seat belts so the kids have 3 point belts. so then of course i have to match the third row with driver/passenger seats.

epsorenson · 10-02-2007, 04:19 PM

ok, so here's the next step...

just got off the phone w/the salvage yard, all 8 mounts are gonna run $150.
so these mounts are going to be grafted in to the bed. apparently all mounts are the same from 00-07 in tahoes/yukons/escalades if you have the 50/50 3rd row.

Matt72blaze · 10-02-2007, 04:36 PM

i'd like to sign up as interested in your interior!!!

epsorenson · 10-02-2007, 05:09 PM

Quote:

Originally Posted by epsorenson

ok, so here's the next step...

just got off the phone w/the salvage yard, all 8 mounts are gonna run $150.
so these mounts are going to be grafted in to the bed. apparently all mounts are the same from 00-07 in tahoes/yukons/escalades if you have the 50/50 3rd row.

oops, scratch that, those are the brackets only. actually gonna be $350 for the mounting brackets with surrounding metal to graft into the blazer. will be cut out at the yard. seems like a lot of work but hopefully will be worth it!

Burt4x4 · 10-02-2007, 05:18 PM

Seams to me it would be more practical to just fab up some custom mounts...I would look into that before dropping all that coin on something you could make for much much less...
.02c

epsorenson · 10-02-2007, 05:56 PM

Quote:

Originally Posted by Burt4x4

Seams to me it would be more practical to just fab up some custom mounts...I would look into that before dropping all that coin on something you could make for much much less...
.02c

yeah i've heard that from a couple of other guys. i have to admit, i'm not a mechanically inclined individual and therefore i'm relying on other people for advice in this regard. the guy who is doing the work for me who has done many of these before said he felt it was better to use the factory piece instead of fabbing one up. he thought it was safer and not that much more expensive than fabbing the brackets.

epsorenson · 10-02-2007, 06:27 PM

hey, wait a minute....will these work?

http://cgi.ebay.com/ebaymotors/Third...QQcmdZViewItem

appears these mount directly to the truck bed.
holes need to be drilled but that looks like that's all you need to do.

can someone advise?

p.s. this will save me a lot of money if so

JWPOORE · 10-02-2007, 06:51 PM

Quote:

Originally Posted by epsorenson

hey, wait a minute....will these work?

http://cgi.ebay.com/ebaymotors/Third...QQcmdZViewItem

appears these mount directly to the truck bed.
holes need to be drilled but that looks like that's all you need to do.

can someone advise?

p.s. this will save me a lot of money if so

I have been looking at those too on Ebay. Here is a thread with pictures I came across with how they look mounted: http://z71tahoe-suburban.com/iboard/...?showtopic=795

I just cannot decide which way to go, either have someone fabricate the floor or cut out a section of flooring out of Tahoe and have it welded in. Either way, I am going to have to have someone do it for me due to my extreme lack of skills.

epsorenson · 10-02-2007, 07:49 PM

now that i'm looking at those pics i don't think those are gonna work.
the newer tahoes/yukons have the recessions and divets in the bed already.
these brackets are made for the newer trucks with the beds pre-fabbed.
otherwise the bars from the seats have no clearance to hook under.

whatcha guys think?

cstanley · 10-03-2007, 01:30 AM

someone used to sell the factory brackets, recess and all for about $100 or so.

gringoloco · 10-03-2007, 08:44 AM

Quote:

Originally Posted by cstanley

someone used to sell the factory brackets, recess and all for about $100 or so.

They won't work for the newer style seats, only the pre-2000.

Burt4x4 · 10-03-2007, 11:52 AM

Quote:

Originally Posted by epsorenson

yeah i've heard that from a couple of other guys. i have to admit, i'm not a mechanically inclined individual and therefore i'm relying on other people for advice in this regard. the guy who is doing the work for me who has done many of these before said he felt it was better to use the factory piece instead of fabbing one up. he thought it was safer and not that much more expensive than fabbing the brackets.

Hmmm, buy a welder and learn hahahaa
If your going to put a cage in that rig maybe you can incorprate seat mounts along with the cage?
Then again it doesn't sound like you will be offorad much with this truck so my thoughts may be overkill for you.
Good Luck
Post up pics when you getum in

epsorenson · 10-03-2007, 12:05 PM

Quote:

Originally Posted by Burt4x4

Hmmm, buy a welder and learn hahahaa
If your going to put a cage in that rig maybe you can incorprate seat mounts along with the cage?
Then again it doesn't sound like you will be offorad much with this truck so my thoughts may be overkill for you.
Good Luck
Post up pics when you getum in

LOL...boy o boy, me welding on my own rig would be a disaster

...too funny.
as far as the cage, yeah it's just gonna be behind the seats to the rear of truck bed.
you're right, this thing is more of a pavement pounder than anything.

will definetely post the pics when completed.

thanks

09-30-2007, 11:54 AM	#1
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	07 yukon/tahoe leather 3rd row install esteemed blazer gurus, i'm going to buy a black leather 07 50/50 3rd row today for my 71. need some advice/tips on this venture. particularly on how they will mount, not sure what mounting plates? the newer modells have the mounts recessed so they don't stick up. one guy suggested going to the junk yard and torching out the entire piece on a new tahoe and then grafting it in to the blazer. (i'd like to take the pathway of least resistance but still make it nice) anyone have any previous experience? pics? anything? thanks in advance. __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5* Last edited by epsorenson; 11-07-2007 at 11:57 AM.

09-30-2007, 01:11 PM	#2
JWPOORE Registered User Join Date: Nov 2006 Location: Central Valley, CA Posts: 198	Re: 07 yukon/tahoe leather 3rd row install Hopfully someone will have done this and will have the answers for you. I have been inquiring about this for months and months and still I have not found anyone who has actually completed this with these seats. I have a set as well that came out of a 00-06 Tahoe that I want to install. I have only seen pictures of installed sets prior to these years so far.

09-30-2007, 01:29 PM	#3
crzngmychvy "1972 C5" Join Date: Jul 2004 Location: SoCal Posts: 729	Re: 07 yukon/tahoe leather 3rd row install I was going to go the same route but changed my mind. I like the lower backrest of the 90s 3rd row seats, and it matched my fronts. Heres the link for the install. If you go to the next page you can see it with all the interior. my blazer interior __________________ - 72 2wd Blazer ...sold... 2wd Blazer Page

09-30-2007, 01:35 PM	#5
usual510 Registered User Join Date: Jul 2007 Location: hayward,ca. Posts: 11	Re: 07 yukon/tahoe leather 3rd row install My friend bolted 2x4's on the original holes then attached new mounts to it,and covered it back with carpet. It looked pretty nice. Also did that with a newer model seats in the front.

10-01-2007, 05:09 PM	#6
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: 07 yukon/tahoe leather 3rd row install ok boyz...here they are...just purchased brand spankin new today, never even sat in! (seats were removed by custom limo company) these are actually 2007 escalade black leather seats! second row captains chairs are going in the front (driver/passenger)...both fold forward for rear entry. i'll be sticking with lap belts for this application because captains don't have integrated belts as you can tell. third row is pretty standard. paid $800 total which i don't think is a bad deal at all. now for the tricky part....installation Attached Images __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5* Last edited by epsorenson; 10-01-2007 at 05:10 PM.

10-01-2007, 05:50 PM	#7
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: 07 yukon/tahoe leather 3rd row install Wow! 800 Is A Steal! ANY IDEA HOW ADJUSTABLE THE 2ND ROWS ARE? UP/DOWN, FWD/BACK? RECLINE? THEY WOULD BE ABOUT PERFECT IF THEY HAD THAT 3-POINT BELT... HOPE YOU POST PROGRESS AND HOW-TO. __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/ Last edited by cstanley; 10-01-2007 at 05:56 PM.

10-01-2007, 07:14 PM	#9
JWPOORE Registered User Join Date: Nov 2006 Location: Central Valley, CA Posts: 198	Re: 07 yukon/tahoe leather 3rd row install Considering what those 50/50 3rd rows can go for on Ebay, I would say that you did well and they are brand new to boot! Hopefully you can (me too!) find a good and cost effecient way to mount up those seats in the back without breaking the bank or a major modification.

10-01-2007, 09:22 PM	#10
va_tlc Registered User Join Date: Nov 2005 Location: VIRGINIA Posts: 905	Re: 07 yukon/tahoe leather 3rd row install wow that was a killer deal ya got.. there should look great in yr blazer. good luck with the install. im sure some of the blazer pros will jump in and get ya in the rite direction.. __________________ 1969 rs 1966fastback 1969swbc/10 2006gt 1972swb4x4

10-01-2007, 11:25 PM	#11
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: 07 yukon/tahoe leather 3rd row install Attached Images __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5* Last edited by N2TRUX; 10-11-2007 at 11:37 PM. Reason: You must be a subscribing member to offer items For Sale!

10-02-2007, 01:02 AM	#12
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: 07 yukon/tahoe leather 3rd row install Damn what made you want to take out your old ones, they are all nice __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

10-02-2007, 04:19 PM	#14
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: 07 yukon/tahoe leather 3rd row install ok, so here's the next step... just got off the phone w/the salvage yard, all 8 mounts are gonna run $150. so these mounts are going to be grafted in to the bed. apparently all mounts are the same from 00-07 in tahoes/yukons/escalades if you have the 50/50 3rd row. __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5*

10-02-2007, 04:36 PM	#15
Matt72blaze Registered User Join Date: Sep 2007 Location: Wilmington, OH Posts: 60	Re: 07 yukon/tahoe leather 3rd row install i'd like to sign up as interested in your interior!!! __________________ 1970 C20 now a K30 1986 3+3 Dually

10-02-2007, 05:18 PM	#17
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: 07 yukon/tahoe leather 3rd row install Seams to me it would be more practical to just fab up some custom mounts...I would look into that before dropping all that coin on something you could make for much much less... .02c __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

10-02-2007, 06:27 PM	#19
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: 07 yukon/tahoe leather 3rd row install hey, wait a minute....will these work? http://cgi.ebay.com/ebaymotors/Third...QQcmdZViewItem appears these mount directly to the truck bed. holes need to be drilled but that looks like that's all you need to do. can someone advise? p.s. this will save me a lot of money if so Attached Images __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5*

10-02-2007, 07:49 PM	#21
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: 07 yukon/tahoe leather 3rd row install now that i'm looking at those pics i don't think those are gonna work. the newer tahoes/yukons have the recessions and divets in the bed already. these brackets are made for the newer trucks with the beds pre-fabbed. otherwise the bars from the seats have no clearance to hook under. whatcha guys think? Attached Images __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5* Last edited by epsorenson; 10-02-2007 at 07:51 PM.



Register or Log In To remove these advertisements.

10-03-2007, 01:30 AM	#22
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: 07 yukon/tahoe leather 3rd row install someone used to sell the factory brackets, recess and all for about $100 or so. __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

Register or Log In To remove these advertisements.