where to take scrap sheetmetal in Oklahoma? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

streetstar · 10-02-2007, 01:44 PM

If any of you okies (OKC area) out there have ever dismantled a truck - where did you take your junk sheetmetal to dispose of it? ---

Any of you non-okies, what type of place deals with this stuff in general - metal recycling places, salvage yards, or ?

I'm , just trying to get rid of a junk cab and a couple of other things - (its really junk - if it was any good- i would give it away for someone else to use)

sneakysnake · 10-02-2007, 02:00 PM

With the price of scrap, everybody and their Grandma is buying it.Any of the big scapers should take it. Check who's buying alumimium, they may take it.
There are scrapers in Durant,Hugo, Idabel and Paris.Any major town should have one.

Lated · 10-02-2007, 02:00 PM

I ended up hauling mine to the county dump. I had to take the sawzall to what was left of it to get it all to fit in the bed of my truck and it's a good thing too cuz the dump here won't take anything that is too bulky but they had a dumpster set aside for scrap metal so in it went.

Musclerodz · 10-02-2007, 02:24 PM

Where is OK? Several places in OKC that will take it. If you don;t have a title you will have to cut it up first.

Mike

streetstar · 10-02-2007, 03:01 PM

Thanks for the tip Mike - i live in Moore, but i dont mind a little bit of a haul - 25 or 30 miles or so if i have to-- its a titled truck

69trk · 10-02-2007, 09:58 PM

try metal check on south west 59th and shields. they give me the best price for metal.

Musclerodz · 10-03-2007, 10:45 AM

metal check doesn't take steel. You will have to go down to Reno to one on those scrap yards. Standard Iron won't take whole vehicles, but there is another one down the street from them that is suppose to.

Mike

cdowns · 10-03-2007, 11:30 AM

Quote:

Originally Posted by Lated

I ended up hauling mine to the county dump. I had to take the sawzall to what was left of it to get it all to fit in the bed of my truck and it's a good thing too cuz the dump here won't take anything that is too bulky but they had a dumpster set aside for scrap metal so in it went.

thats pretty much what i did with the un sellable scraps from a few vehicles// unless theres a place real close that will pay, the time and gas money as well as wear and tear on me and my vehicle doesnt make it worth the effort

10-02-2007, 01:44 PM	#1
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	where to take scrap sheetmetal in Oklahoma? If any of you okies (OKC area) out there have ever dismantled a truck - where did you take your junk sheetmetal to dispose of it? --- Any of you non-okies, what type of place deals with this stuff in general - metal recycling places, salvage yards, or ? I'm , just trying to get rid of a junk cab and a couple of other things - (its really junk - if it was any good- i would give it away for someone else to use)

10-02-2007, 02:00 PM	#2
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: where to take scrap sheetmetal in Oklahoma? With the price of scrap, everybody and their Grandma is buying it.Any of the big scapers should take it. Check who's buying alumimium, they may take it. There are scrapers in Durant,Hugo, Idabel and Paris.Any major town should have one.

10-02-2007, 02:00 PM	#3
Lated Registered User Join Date: Feb 2007 Location: Colorado Posts: 255	Re: where to take scrap sheetmetal in Oklahoma? I ended up hauling mine to the county dump. I had to take the sawzall to what was left of it to get it all to fit in the bed of my truck and it's a good thing too cuz the dump here won't take anything that is too bulky but they had a dumpster set aside for scrap metal so in it went. __________________ “If you don’t have time to do it right now, how will you ever find time to fix it.” - author unknown '70 SWB Step-Side (More rust than metal)

10-02-2007, 02:24 PM	#4
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: where to take scrap sheetmetal in Oklahoma? Where is OK? Several places in OKC that will take it. If you don;t have a title you will have to cut it up first. Mike __________________ Mike Redpath

10-02-2007, 03:01 PM	#5
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	Re: where to take scrap sheetmetal in Oklahoma? Thanks for the tip Mike - i live in Moore, but i dont mind a little bit of a haul - 25 or 30 miles or so if i have to-- its a titled truck Last edited by streetstar; 10-02-2007 at 03:02 PM.

10-02-2007, 09:58 PM	#6
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: where to take scrap sheetmetal in Oklahoma? try metal check on south west 59th and shields. they give me the best price for metal.

10-03-2007, 10:45 AM	#7
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: where to take scrap sheetmetal in Oklahoma? metal check doesn't take steel. You will have to go down to Reno to one on those scrap yards. Standard Iron won't take whole vehicles, but there is another one down the street from them that is suppose to. Mike __________________ Mike Redpath



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.