Wheel well rear "inner" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70short · 10-11-2007, 04:42 PM

Has anybody cut a set original rear tubes to splice into the original tubes that are in the truck to make them wider? So all the lines and contours are the same. I hope that makes sense.

BB72CHEVKT · 10-11-2007, 04:44 PM

Quote:

Originally Posted by 70short

Has anybody cut a set original rear tubes to splice into the original tubes that are in the truck to make them wider? So all the lines and contours are the same. I hope that makes sense.

Yeah, there was a set of enlarged ones in the parts section a while back.

724x4a/cchevy · 10-11-2007, 05:06 PM

Here's a pic that i took at the board meet of ADHDcarguy's truck
Name: norwood 011.jpg
Views: 105
Size: 44.9 KB

69trk · 10-11-2007, 08:49 PM

I found a set at a salvage yard for $12 and took mine and the ones that i just bought to a good body shop and told them i needed them 2" wider than stock. He cut off the flange on one set and cut the flange 2" wider off the other set and welded them to my original set. $80 later it looks great. The only thing I don't know if i should chrome plate them or not. The rest of my bed has spray in bed liner that somewhat matches my paint and there is no way they can match with new bed liner.

10-11-2007, 04:42 PM	#1
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Wheel well rear "inner" Has anybody cut a set original rear tubes to splice into the original tubes that are in the truck to make them wider? So all the lines and contours are the same. I hope that makes sense. __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

10-11-2007, 05:06 PM	#3
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Wheel well rear "inner" Here's a pic that i took at the board meet of ADHDcarguy's truck __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor Last edited by 724x4a/cchevy; 10-11-2007 at 05:07 PM.

10-11-2007, 08:49 PM	#4
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: Wheel well rear "inner" I found a set at a salvage yard for $12 and took mine and the ones that i just bought to a good body shop and told them i needed them 2" wider than stock. He cut off the flange on one set and cut the flange 2" wider off the other set and welded them to my original set. $80 later it looks great. The only thing I don't know if i should chrome plate them or not. The rest of my bed has spray in bed liner that somewhat matches my paint and there is no way they can match with new bed liner.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.