engine progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60ratrod · 10-17-2007, 05:29 AM

so since many of you know i had crank bearings going out in my motor i did a rebuild on the lower end. i also replaced the crank, cam, timing chain and gears also with a high volume oil pump. when i pulled all of the covers and oil pan off i found that my timing chain had a lot of slack in it, so much that it actually ate a groove in the timing cover. so i've gotten all the covers and oil pan painted up along with the intake. i haven't gotten the motor quite put all the way back together but that will be done this weekend. here's the photos that i have so far so enjoy!

60ratrod · 10-17-2007, 05:31 AM

more photos of the painting

Lemondrop63 · 10-17-2007, 06:48 AM

Thats purty! looks good..Cincinnati Bengal colors!

Stepside65 · 10-17-2007, 08:14 AM

You definitely outdid yourself. Great job on the paint. Can't wait to see what it'll look like fully assembled in your truck.

**ChiefRocka** · 10-17-2007, 09:22 AM

BigDaddyDave · 10-17-2007, 10:07 AM

Hey when you finish yours,stop by my house and paint mine.HAHAHA That looks Awsome.

Iron-Butt · 10-17-2007, 06:46 PM

good work

04Xrider · 10-17-2007, 08:25 PM

Looking good! Doesn't look like you are applying the paint sparingly

.

60ratrod · 10-18-2007, 12:08 AM

the engine has 5-6 coats, the intake also has like 5 coats, the pulleys, covers, and oil pan have about 3-4 coats including clear coat due to the black paint hazing over on me

Ham-er · 10-18-2007, 03:55 AM

Quote:

Originally Posted by 60ratrod

so since many of you know i had crank bearings going out in my motor i did a rebuild on the lower end. i also replaced the crank, cam, timing chain and gears also with a high volume oil pump. when i pulled all of the covers and oil pan off i found that my timing chain had a lot of slack in it, so much that it actually ate a groove in the timing cover. so i've gotten all the covers and oil pan painted up along with the intake. i haven't gotten the motor quite put all the way back together but that will be done this weekend. here's the photos that i have so far so enjoy!

Someone once suggested to me that timing chains strech. Perhaps they do a tiny bit but what causes that much slack is that the fiber teeth that used to be on the cam gear have broken off of the metal part of the gear and fallen down into the oil pan. so be sure to check your oil pump pickup tube for bits of the fiber teeth if you are reusing that part. I have seen this many many times. supposedly the factory put the fiber teeth on for less noise. The replacement gears dont have the fiber teeth!

60ratrod · 10-18-2007, 04:19 AM

well a new high volume oil pump is on the list of new parts that i am installing on the motor. it probably wasn't the factory gears and chain. but the chain had stretched so much that it ate a groove into the side of the timing chain cover. the only fiber teeth that i have seen was on a ford 400 that i had used for parts when i rebuilt a 351m to a 410 stroker.

60ratrod · 10-21-2007, 12:36 AM

well the motor is put back together for the most part and it looks so perdy!! too bad i forgot my damn camera

Stepside65 · 10-21-2007, 01:20 AM

Glad you got it all back together.

63sbssbbw · 10-21-2007, 07:40 AM

Looks great 60
What carb are you going to use

10-17-2007, 05:29 AM	#1
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	engine progress so since many of you know i had crank bearings going out in my motor i did a rebuild on the lower end. i also replaced the crank, cam, timing chain and gears also with a high volume oil pump. when i pulled all of the covers and oil pan off i found that my timing chain had a lot of slack in it, so much that it actually ate a groove in the timing cover. so i've gotten all the covers and oil pan painted up along with the intake. i haven't gotten the motor quite put all the way back together but that will be done this weekend. here's the photos that i have so far so enjoy! Attached Images

10-17-2007, 05:31 AM	#2
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: engine progress more photos of the painting Attached Images

10-17-2007, 06:48 AM	#3
Lemondrop63 Registered User Join Date: Aug 2007 Location: Hamilton, Ohio Posts: 109	Re: engine progress Thats purty! looks good..Cincinnati Bengal colors! __________________ This one time at bandcamp, in my c10, I ran over the girl hiding the flute! http://67-72chevytrucks.com/vboard/s...d.php?t=255141

10-17-2007, 08:14 AM	#4
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: engine progress You definitely outdid yourself. Great job on the paint. Can't wait to see what it'll look like fully assembled in your truck. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

10-17-2007, 09:22 AM	#5
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: engine progress __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-17-2007, 10:07 AM	#6
BigDaddyDave RIP BigDaddyDave ~7-23-09~ You will be missed~ Join Date: Aug 2007 Location: Concord NC Posts: 1,361	Re: engine progress Hey when you finish yours,stop by my house and paint mine.HAHAHA That looks Awsome.

10-17-2007, 06:46 PM	#7
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: engine progress good work __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

10-17-2007, 08:25 PM	#8
04Xrider Registered thread killer Join Date: Nov 2006 Location: Cookson, OK. Posts: 349	Re: engine progress Looking good! Doesn't look like you are applying the paint sparingly. __________________ !966 stepside, 350 SB, ZZ-4 roller, Crane roller rockers, 0.030 flat tops, airgap intake, 750 Holley, stainless steel headers, edelbrock SDT mufflers, Mark 8 elec fan, 700R-4, column shift

10-18-2007, 12:08 AM	#9
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: engine progress the engine has 5-6 coats, the intake also has like 5 coats, the pulleys, covers, and oil pan have about 3-4 coats including clear coat due to the black paint hazing over on me

10-18-2007, 04:19 AM	#11
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: engine progress well a new high volume oil pump is on the list of new parts that i am installing on the motor. it probably wasn't the factory gears and chain. but the chain had stretched so much that it ate a groove into the side of the timing chain cover. the only fiber teeth that i have seen was on a ford 400 that i had used for parts when i rebuilt a 351m to a 410 stroker.

10-21-2007, 12:36 AM	#12
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: engine progress well the motor is put back together for the most part and it looks so perdy!! too bad i forgot my damn camera

10-21-2007, 01:20 AM	#13
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: engine progress Glad you got it all back together. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

10-21-2007, 07:40 AM	#14
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: engine progress Looks great 60 What carb are you going to use __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.