SBC heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**smitty62** · 10-05-2002, 01:30 PM

I'm still looking for a good set of 186 casting heads--bare or assembled.

mark25 · 10-05-2002, 07:03 PM

i posted a reply to your same titled post on the parts board.

**smitty62** · 10-06-2002, 01:03 PM

Still looking for these heads---anyone???

mikep · 10-06-2002, 07:24 PM

why so interested in the 186 castings?

**smitty62** · 10-06-2002, 07:56 PM

Why so interested in why I'm interested??

mikep · 10-06-2002, 08:17 PM

Well, because I'm from the government and I'm here to help :-)
Just wondering why you were so interested in the 186 castings as opposed to other Chevrolet castings. Any advantage ?
This is the discussion forum. Feel free to have your request discussed . The ad forum is over here....http://67-72chevytrucks.com/vboard/f...3?s=&forumid=8

guypm · 10-06-2002, 09:54 PM

I've got a set of stock heads. Im not sure if they are 186 castings. They come off a Scoggins Dickey crate 350 motor. They have six thousand miles. I went with the Edelbrock performer RPM heads for more power. I'll let em go cheap if you are intrested. I think they were assembled in Mexico. Email me at:
gmenard@gt.rr.com if intrested
Thanks, Guy

**smitty62** · 10-06-2002, 10:53 PM

Not sure what you have, but they're not 186's. They haven't been made since, what 1970???

10-05-2002, 01:30 PM	#1
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	SBC heads I'm still looking for a good set of 186 casting heads--bare or assembled. __________________ Stepsides look like real trucks! Smitty

10-05-2002, 07:03 PM	#2
mark25 Registered User Join Date: Feb 2000 Location: Vassar,Ks 66543 Posts: 375	i posted a reply to your same titled post on the parts board. __________________ '72 C-10 Cheyenne Super, 402/TH400, Bucket Seats, tilt, tach, AM/FM & shoulder harnesses and a ground up restoration

10-06-2002, 01:03 PM	#3
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Still looking for these heads---anyone??? __________________ Stepsides look like real trucks! Smitty

10-06-2002, 07:24 PM	#4
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	why so interested in the 186 castings? __________________ No truck :-(

10-06-2002, 07:56 PM	#5
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Why so interested in why I'm interested?? __________________ Stepsides look like real trucks! Smitty

10-06-2002, 08:17 PM	#6
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	Well, because I'm from the government and I'm here to help :-) Just wondering why you were so interested in the 186 castings as opposed to other Chevrolet castings. Any advantage ? This is the discussion forum. Feel free to have your request discussed . The ad forum is over here....http://67-72chevytrucks.com/vboard/f...3?s=&forumid=8 __________________ No truck :-( Last edited by mikep; 10-06-2002 at 08:20 PM.

10-06-2002, 09:54 PM	#7
guypm Registered User Join Date: Feb 2002 Location: orange, tx usa Posts: 167	I've got a set of stock heads. Im not sure if they are 186 castings. They come off a Scoggins Dickey crate 350 motor. They have six thousand miles. I went with the Edelbrock performer RPM heads for more power. I'll let em go cheap if you are intrested. I think they were assembled in Mexico. Email me at: gmenard@gt.rr.com if intrested Thanks, Guy __________________ guypm 1971 SWB Fleetside/350 performer rpm heads &intake/ holley 750dp/1.5roller rockers/MSD6a/700r4 1650stall/one piece driveshaft/3.73 open/dynomax ceramic coated headers/3chamber flowmasters/

10-06-2002, 10:53 PM	#8
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Not sure what you have, but they're not 186's. They haven't been made since, what 1970??? __________________ Stepsides look like real trucks! Smitty



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.