![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Oh,you can't buy that new
![]() Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
need a pic and maybe some info on INSIDE tailgate handle.
I just inherited a tailgate that already had the outside smoothed. It has the bracket for the relocater already on the inside (no hole yet), but i have nothing else from the Kit-. Did it use the stock release handle?? what happens with the rods. thanx , crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone ![]() 73 Pinto, stock, w/CragarSS's-eww ![]() LOTS of Cummins trucks. |
![]() |
![]() |
![]() |
#2 |
Chevy Truck Addict
![]() Join Date: Aug 2006
Location: Kelowna, BC
Posts: 1,176
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
I bought a reverse kit from Mar-K for around $100. It came with the rods, the cover plate and the handle. I'm not sure if the rods are the same because I didn't compare them to the stock ones. The handle from the kit I got is just an 88-98 Chevy tailgate handle which should be readily available. Here is a picture of the installed product on my truck. Sorry, I don't have any of the install process.
__________________
. 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans . |
![]() |
![]() |
![]() |
#3 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,826
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
My kit used/uses the stock handle and rods...it only came with a bracket and template.
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 11-07-2007 at 04:33 PM. |
![]() |
![]() |
![]() |
#4 |
It Is What It Is,,,,
Join Date: Aug 2006
Location: *The Gun Shine State*Florida*
Posts: 1,765
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
NOW thats a nice bed!
__________________
*79 C10 Short Box ST8 6 bang'r * *Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT *__--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............|_(O)_ |___(O) ] FAQ INDEX Thread The Kulture ![]() My Rat Den ![]() |
![]() |
![]() |
![]() |
#5 | |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Quote:
![]()
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Sep 2004
Location: Georgia
Posts: 614
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
__________________
![]() 2012 Silverado LT 1500, 5.3, 6 speed auto '86 SWB C-10 Silverado |
![]() |
![]() |
![]() |
#7 |
Oh,you can't buy that new
![]() Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
can you hit me with a pic of the cut out/handle area. ? thanx ,crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone ![]() 73 Pinto, stock, w/CragarSS's-eww ![]() LOTS of Cummins trucks. |
![]() |
![]() |
![]() |
#8 |
Truck Parts Mfg.
![]() Join Date: Jul 2005
Location: Oklahoma City, OK
Posts: 697
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
C-10 Driver -
That is a great picture and we would love to use it if you wouldn't mind emailing a copy to me. webmaster@mar-k.com. You hardly ever get a picture of the relocator kit from the INSIDE. Great looking bed! These kits are $80.00 and also include instructions which have a template for cutting the hole.
__________________
GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks Last edited by MAR-Ktech; 11-08-2007 at 05:09 PM. |
![]() |
![]() |
![]() |
#9 |
Chevy Truck Addict
![]() Join Date: Aug 2006
Location: Kelowna, BC
Posts: 1,176
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Thanks Mar-Ktech. Email sent. Not trying to plug the product but I would recommend this kit. It was quite easy to install and included all the parts and instructions I needed to complete the job.
__________________
. 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans . |
![]() |
![]() |
![]() |
#10 |
Oh,you can't buy that new
![]() Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
73-87 good pic of handle anyone?
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone ![]() 73 Pinto, stock, w/CragarSS's-eww ![]() LOTS of Cummins trucks. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Nov 2007
Location: New Jersey
Posts: 466
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
I usd a sir michaels kit. you use the stock rods and handle. you have to flip the rods over so the hook into the handle but it was very easy
|
![]() |
![]() |
![]() |
#12 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,826
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Dave, my tailgate is still at the body shop, I'll snap a pic next time I go over if it isn't too late.
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
![]() |
![]() |
![]() |
#13 | |
Oh,you can't buy that new
![]() Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Quote:
84SWB where in Nj are you ? not many of us here. thanx, crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone ![]() 73 Pinto, stock, w/CragarSS's-eww ![]() LOTS of Cummins trucks. |
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Nov 2007
Location: New Jersey
Posts: 466
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Im in Deptford township. I was at your house and I got a rear window and some other small parts from you.
|
![]() |
![]() |
![]() |
#15 |
Oh,you can't buy that new
![]() Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Bill, the harley tuner ???
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone ![]() 73 Pinto, stock, w/CragarSS's-eww ![]() LOTS of Cummins trucks. |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Nov 2007
Location: New Jersey
Posts: 466
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Yes sir.
|
![]() |
![]() |
![]() |
#17 |
Oh,you can't buy that new
![]() Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
well Bill, welcome to one of the best 73-87 forums on the net. this is the one I probably told you about.I try to tell everyone who has dealt with me.
I changed emails about a year ago and then computers appx. 9 months ago and lost every email address I had. BTW- i got rid of the 95 883 and stepped up to a 2002 1200C . my new email is dbcrossy@verizon.net so let me know if you need anything else. crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone ![]() 73 Pinto, stock, w/CragarSS's-eww ![]() LOTS of Cummins trucks. |
![]() |
![]() |
![]() |
#18 |
iamthepoolboy!
Join Date: Jun 2004
Location: Benton Arkansas
Posts: 175
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Here's mine for my 81. Bought it from LMC. It came with new rods also.
__________________
Black primed 81 Silverado SWB one owner rust free all original 106,000 project. Steel cowl hood, 89/91 front grill, Blazer tailgate trim, sport rear bumper, 5/6 Drop, 17" Eagle Alloys, Big block is on the stand! COMING SOON: one piece glass, and more. ![]() |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Nov 2007
Location: New Jersey
Posts: 466
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Good move getting a 1200 over the 883. I bet it is more fun to ride.
|
![]() |
![]() |
![]() |
#20 | |
Oh,you can't buy that new
![]() Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: need a pic and maybe some info on INSIDE tailgate handle.
Quote:
the 883 ran sweet for what it was cold or hot . tuning was spot on. the 1200 needs some help. Nice V&H pipes but apparantly no jetting to match.
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone ![]() 73 Pinto, stock, w/CragarSS's-eww ![]() LOTS of Cummins trucks. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|