?? for you guru's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-12-2007, 07:30 PM

Did 67 2wd's come out with power steering boxes on them???? The only 67's I've ever parted that had PS was the power assist stuff. I'm real curious about this? I got some pics I'll share with you all, I got to go get my camera and I'll post them. This is real strange to me what I found today, never seen this before. Thanks Randy

Longhorn Man · 11-12-2007, 07:58 PM

I've seen a late 67 that had it, it *looked* stock, had the frame dent...
However, I've seen 68's that didn't have it.

teeitup · 11-12-2007, 08:08 PM

this is a 67 frame and vin all match, has the frame dented and had this bracket on it. I never seen one with the frame right and this bracket before

Longhorn Man · 11-12-2007, 08:10 PM

wow... that's a little freak of nature there.

**Classic Heartbeat** · 11-12-2007, 08:31 PM

Need to see more of the frame. What do the top of the frame rails look like next to where the engine sets? I also do not see the pronounced indentation. The bracket that it has is the one for the ram assist style power steering. WES

teeitup · 11-12-2007, 08:50 PM

Longhornman, I was thinking the same thing
Wes, I'll get more pics Sun, its got the indentation on the outer wall of frame for the bolts for the PS box. I was thinking the bracket may be from a power assist setup.
Thanks Randy

**jerry moss** · 11-12-2007, 08:55 PM

Randy,
that bracket is from the ram-assist p-s. i, too have seen 67s with intregal p-s boxes that looked oem and 68s with ram-assist that looked oem too. but i've never seen one set up both ways.

**Classic Heartbeat** · 11-12-2007, 08:56 PM

Hmmmmm, I can see the raised places for the bolts. I just am not seeing the indentation.. What steering gear was bolted to it? WES

**special-K** · 11-12-2007, 09:38 PM

I`m stumped at this point and am hereby turning in my guru badge.I guess it could have the indent as found on some`67s(late,I`d imagine),but came with the ram-assist steering.Then,later,was swapped to the power gear later due to problems with the ram-assist.I don`t know how serviceable they were or if parts could be found.

Longhorn Man · 11-12-2007, 10:26 PM

Does it have the sticker in the door jamb with the build month?

teeitup · 11-13-2007, 12:13 AM

I'll get some more pics and info Sun and let you guys hash it out. I'm lost on it. I'll look at glove box option list too and see what it says. Thanks Randy

teeitup · 11-13-2007, 11:40 AM

Here are some more pics

67_C-30 · 11-13-2007, 12:56 PM

I would guess it had the ram assisted power steering from the factory, and was later changed over to conventional power steering gearbox. I can't see why the ram assisted bracket would be there otherwise.

67_C-30 · 11-13-2007, 01:04 PM

The frame and the bracket look just my '67 with ram assisted PS.

11-12-2007, 07:30 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	?? for you guru's Did 67 2wd's come out with power steering boxes on them???? The only 67's I've ever parted that had PS was the power assist stuff. I'm real curious about this? I got some pics I'll share with you all, I got to go get my camera and I'll post them. This is real strange to me what I found today, never seen this before. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-12-2007, 07:58 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: ?? for you guru's I've seen a late 67 that had it, it looked stock, had the frame dent... However, I've seen 68's that didn't have it.

11-12-2007, 08:08 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: ?? for you guru's this is a 67 frame and vin all match, has the frame dented and had this bracket on it. I never seen one with the frame right and this bracket before Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-12-2007, 08:10 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: ?? for you guru's wow... that's a little freak of nature there.

11-12-2007, 08:31 PM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: ?? for you guru's Need to see more of the frame. What do the top of the frame rails look like next to where the engine sets? I also do not see the pronounced indentation. The bracket that it has is the one for the ram assist style power steering. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-12-2007, 08:50 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: ?? for you guru's Longhornman, I was thinking the same thing Wes, I'll get more pics Sun, its got the indentation on the outer wall of frame for the bolts for the PS box. I was thinking the bracket may be from a power assist setup. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-12-2007, 08:55 PM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,862	Re: ?? for you guru's Randy, that bracket is from the ram-assist p-s. i, too have seen 67s with intregal p-s boxes that looked oem and 68s with ram-assist that looked oem too. but i've never seen one set up both ways. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

11-12-2007, 08:56 PM	#8
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: ?? for you guru's Hmmmmm, I can see the raised places for the bolts. I just am not seeing the indentation.. What steering gear was bolted to it? WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-12-2007, 09:38 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: ?? for you guru's I`m stumped at this point and am hereby turning in my guru badge.I guess it could have the indent as found on some`67s(late,I`d imagine),but came with the ram-assist steering.Then,later,was swapped to the power gear later due to problems with the ram-assist.I don`t know how serviceable they were or if parts could be found. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-12-2007 at 11:06 PM.

11-12-2007, 10:26 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: ?? for you guru's Does it have the sticker in the door jamb with the build month?

11-13-2007, 12:13 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: ?? for you guru's I'll get some more pics and info Sun and let you guys hash it out. I'm lost on it. I'll look at glove box option list too and see what it says. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-13-2007, 11:40 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: ?? for you guru's Here are some more pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-13-2007, 12:56 PM	#13
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: ?? for you guru's I would guess it had the ram assisted power steering from the factory, and was later changed over to conventional power steering gearbox. I can't see why the ram assisted bracket would be there otherwise. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

11-13-2007, 01:04 PM	#14
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: ?? for you guru's The frame and the bracket look just my '67 with ram assisted PS. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.