Need a left manifold for a 72 catalina - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wootdog · 11-19-2007, 07:36 PM

I know guys and gals that this is for trucks, but I know all of you have more than just these trucks. Besides, this is the biggest bunch of people gathered in the world. In short, I got in a hurry and broke off a stud in my left manifold for my 72 Pontiac Catalina. It is a 350 with a 2 barrel. I tried drilling it out today. Spent hours trying it. Got in a hurry and broke off part of the manifold where it connects to the down pipe. What would normally be associated with the donut gasket. Any help would be appreciated.
Sincerely,
Kerry

jorgensensc · 11-19-2007, 11:38 PM

Is this a regular ramhorn manifold for the driverside with eth alternator bracket molded in. If so PM me. I have one in nice shape I could sell.
Shawn

Pont406 · 11-19-2007, 11:52 PM

Wootdog,
Try this link http://forums.performanceyears.com/f...play.php?f=449 someone will have it.

tclaremont · 11-20-2007, 07:52 AM

Or if you want actual help, go to classicalpontiac.com and post in the forums or on the free classified board.

I just finhished a 72 Cat this past summer. It came out nice!

rlm316 · 11-22-2007, 02:20 PM

I have a set for a '65. 76 casting# on the head that it bolted to. Should be the same unless you have some hi perf. castings. Let me know. Lane

11-19-2007, 07:36 PM	#1
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,676	Need a left manifold for a 72 catalina I know guys and gals that this is for trucks, but I know all of you have more than just these trucks. Besides, this is the biggest bunch of people gathered in the world. In short, I got in a hurry and broke off a stud in my left manifold for my 72 Pontiac Catalina. It is a 350 with a 2 barrel. I tried drilling it out today. Spent hours trying it. Got in a hurry and broke off part of the manifold where it connects to the down pipe. What would normally be associated with the donut gasket. Any help would be appreciated. Sincerely, Kerry __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

11-19-2007, 11:38 PM	#2
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Need a left manifold for a 72 catalina Is this a regular ramhorn manifold for the driverside with eth alternator bracket molded in. If so PM me. I have one in nice shape I could sell. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-19-2007, 11:52 PM	#3
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Re: Need a left manifold for a 72 catalina Wootdog, Try this link http://forums.performanceyears.com/f...play.php?f=449 someone will have it.

11-20-2007, 07:52 AM	#4
tclaremont Registered User Join Date: Aug 2007 Location: Rochester, NY USA Posts: 70	Re: Need a left manifold for a 72 catalina Or if you want actual help, go to classicalpontiac.com and post in the forums or on the free classified board. I just finhished a 72 Cat this past summer. It came out nice!

11-22-2007, 02:20 PM	#5
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Need a left manifold for a 72 catalina I have a set for a '65. 76 casting# on the head that it bolted to. Should be the same unless you have some hi perf. castings. Let me know. Lane



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.