Blazer 1/2 Top $550 Firm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jkade · 11-19-2007, 09:21 PM

I have sanded most of it down to the fiberglass and it needs a skim coat over it to fill the small cracks at the front and small imperfections. The cracks are not all the way through just on the outside. I have the 4 hold downs and the rear glass for it also. It will need some glass work and all new rubber and I would get a new back glass since they are cheap. $550 is what I have in it and I will not take a penny less since these are so hard to find, I will put it up and keep a few more years if nobody wants it. The reason I am selling is becasue this is not going to work with the interior in my blazer when I get it done and I am going to run the full top. You can see in the pics the small cracks I am talking about. I don't have the bulhead.

vtblazer · 11-20-2007, 08:03 AM

First the interior and now this...your killin' me here!

Great parts, wish I were closer.

Think that half top could be shipped?

jkade · 11-20-2007, 05:50 PM

Quote:

Originally Posted by vtblazer

First the interior and now this...your killin' me here!

Great parts, wish I were closer.

Think that half top could be shipped?

It probably could be but it will have to have some concrete blocks added to the pallet for some more weight. Things like the top are expensive to ship because of the weight to space ratio that it is, more weight = less money.
Let me know
Thanks, Kade

jkade · 11-22-2007, 01:21 PM

Going on ebay soon

red71cheyenne · 11-22-2007, 05:32 PM

How far are you from Texas? The gulf coast part...

red71cheyenne · 11-22-2007, 05:38 PM

Nevermind I map quested it...PM on the way

jkade · 11-22-2007, 07:43 PM

Quote:

Originally Posted by red71cheyenne

Nevermind I map quested it...PM on the way

Pm replied

jkade · 11-25-2007, 11:28 AM

bump ttt

jkade · 02-23-2008, 08:27 AM

tax time I know you have money

ttt...

crews · 02-23-2008, 08:52 AM

I think "LUV" is actively looking for one of these and he lives reasonably close to you ( Tn)

Look under the "WTB" posts.....

jkade · 02-23-2008, 06:37 PM

I think he want's one that don't need much and if this one was mint it would be a lot more. Thanks for looking out for me.

crews · 02-24-2008, 05:05 AM

No problem- just trying to help out the both of ya!!

I figured as rare as these are he'd at least want to know about it.....

LUV2XCLR8 · 02-25-2008, 07:32 AM

Thank you Crews for that Nod, And the work doesn't scare me Kade,
but no bulkhead kills the deal. Good luck on your sale, I'll keep look'n.

(If my SWT sells then I'd re-consider, maybe it will B4 you sell this)

jkade · 02-27-2008, 08:54 PM

Quote:

Originally Posted by LUV2XCLR8

Thank you Crews for that Nod, And the work doesn't scare me Kade,
but no bulkhead kills the deal. Good luck on your sale, I'll keep look'n.

(If my SWT sells then I'd re-consider, maybe it will B4 you sell this)

You could make a bulkhead I would think.

TTT>>>>

LUV2XCLR8 · 02-28-2008, 12:51 AM

True, but the bottom of it is not flat, it's designed to sit in the grooves
of the bed floor. (IIRC) I have some intrest in my SWT I'll let you know.

70 Suburban · 02-28-2008, 10:27 PM

my cst has rubber mat in the back to make the carpet fit level. its oem so It wouldnt be to off to just make it flat... ohh If i would have seen this when I was in AL i may have picked it up...damn

jkade · 02-29-2008, 07:21 AM

Quote:

Originally Posted by 70 Suburban

my cst has rubber mat in the back to make the carpet fit level. its oem so It wouldnt be to off to just make it flat... ohh If i would have seen this when I was in AL i may have picked it up...damn

Yeah when I was looking for one you couldn't find one and now seems nobody wants one

70 Suburban · 02-29-2008, 08:12 PM

no no I want one but I jsut dont h ave the cheese to throw down

LUV2XCLR8 · 03-01-2008, 12:59 AM

jkade · 03-04-2008, 11:28 PM

I know about not having the cheese

ttt.....

jkade · 03-06-2008, 06:27 AM

ttt...

**jaros44sr** · 03-06-2008, 06:35 AM

When I had the money, none were available, now that I don't have the money....go figure, good price tho

jkade · 03-06-2008, 06:59 AM

Quote:

Originally Posted by jaros44sr

When I had the money, none were available, now that I don't have the money....go figure, good price tho

I know how you feel

Thanks

**uncle** · 03-06-2008, 07:31 AM

I had one years ago and the bottom of the bulkhead was flat.

70 Suburban · 03-06-2008, 08:15 AM

I think that there are options like anyother some flat some not

11-19-2007, 09:21 PM	#1
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Blazer 1/2 Top $550 Firm I have sanded most of it down to the fiberglass and it needs a skim coat over it to fill the small cracks at the front and small imperfections. The cracks are not all the way through just on the outside. I have the 4 hold downs and the rear glass for it also. It will need some glass work and all new rubber and I would get a new back glass since they are cheap. $550 is what I have in it and I will not take a penny less since these are so hard to find, I will put it up and keep a few more years if nobody wants it. The reason I am selling is becasue this is not going to work with the interior in my blazer when I get it done and I am going to run the full top. You can see in the pics the small cracks I am talking about. I don't have the bulhead.

11-20-2007, 08:03 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Blazer 1/2 Top $550 Firm First the interior and now this...your killin' me here! Great parts, wish I were closer. Think that half top could be shipped?

11-22-2007, 01:21 PM	#4
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Blazer 1/2 Top $550 Firm Going on ebay soon

11-22-2007, 05:32 PM	#5
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Blazer 1/2 Top $550 Firm How far are you from Texas? The gulf coast part... __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-22-2007, 05:38 PM	#6
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Blazer 1/2 Top $550 Firm Nevermind I map quested it...PM on the way __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-25-2007, 11:28 AM	#8
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Blazer 1/2 Top $550 Firm bump ttt

02-23-2008, 08:27 AM	#9
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Blazer 1/2 Top $550 Firm tax time I know you have money ttt...

02-23-2008, 08:52 AM	#10
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Re: Blazer 1/2 Top $550 Firm I think "LUV" is actively looking for one of these and he lives reasonably close to you ( Tn) Look under the "WTB" posts..... __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

02-23-2008, 06:37 PM	#11
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Blazer 1/2 Top $550 Firm I think he want's one that don't need much and if this one was mint it would be a lot more. Thanks for looking out for me.

02-24-2008, 05:05 AM	#12
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Re: Blazer 1/2 Top $550 Firm No problem- just trying to help out the both of ya!! I figured as rare as these are he'd at least want to know about it..... __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

02-25-2008, 07:32 AM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Blazer 1/2 Top $550 Firm Thank you Crews for that Nod, And the work doesn't scare me Kade, but no bulkhead kills the deal. Good luck on your sale, I'll keep look'n. (If my SWT sells then I'd re-consider, maybe it will B4 you sell this) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-28-2008, 12:51 AM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Blazer 1/2 Top $550 Firm True, but the bottom of it is not flat, it's designed to sit in the grooves of the bed floor. (IIRC) I have some intrest in my SWT I'll let you know. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-28-2008, 10:27 PM	#16
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: Blazer 1/2 Top $550 Firm my cst has rubber mat in the back to make the carpet fit level. its oem so It wouldnt be to off to just make it flat... ohh If i would have seen this when I was in AL i may have picked it up...damn Last edited by 70 Suburban; 02-28-2008 at 10:28 PM.

02-29-2008, 08:12 PM	#18
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: Blazer 1/2 Top $550 Firm no no I want one but I jsut dont h ave the cheese to throw down

03-01-2008, 12:59 AM	#19
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Blazer 1/2 Top $550 Firm __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

03-04-2008, 11:28 PM	#20
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Blazer 1/2 Top $550 Firm I know about not having the cheese ttt.....

03-06-2008, 06:27 AM	#21
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Blazer 1/2 Top $550 Firm ttt...

03-06-2008, 06:35 AM	#22
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Blazer 1/2 Top $550 Firm When I had the money, none were available, now that I don't have the money....go figure, good price tho __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-06-2008, 07:31 AM	#24
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Blazer 1/2 Top $550 Firm I had one years ago and the bottom of the bulkhead was flat.

03-06-2008, 08:15 AM	#25
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: Blazer 1/2 Top $550 Firm I think that there are options like anyother some flat some not

Register or Log In To remove these advertisements.