What did you get done? Thanksgiving edition 11/25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 11-27-2007, 09:29 PM

I hope everyone had a safe and Happy Thanksgiving. Since most of you had a long weekend, I will assume once the overeating of turkey was done you might have actually worked on your truck.

I let my crew off so they could go try to shoot Bambi's Daddy, and take advantage of some of the Black Friday specials. Meanwhile I worked, and tried to chase down some rather elusive 3" donut gaskets.

I thought I had them located when my bro-in-law called Excel Parts and they said they had a set. I went to will call to pick them up only to find they actually had 2.5" not 3". CRAP!

I was headed to a muffler shop to see if they might have some when I stopped at a "real" autoparts. You know the old fashioned kind where they know what a part is without looking it up. And when you tell them it fits a 63 Corvette with a fuel injected 327, they don't peck at their computer then ask "2wd or 4wd".

Anyway, I went to install them today and that was great fun. When I pulled the old ones almost all of the studs backed out of the manifold. The only way to get them back in was to drop the Y-pipe put all the studs in place, then hang the y-pipe again. Sounds pretty simple huh. Trust me, it's not.

The disadvantage of running 3" Ramhorn manifolds is they are a "really" tight fit. I thought I was going to have to pull the freakin motor, but I finally got all of the studs snugged down....

What did you get done?

bagged74 · 11-27-2007, 09:33 PM

finally got the tires and wheels on my 72... I'm stoked
more pics here....http://67-72chevytrucks.com/vboard/s...=201680&page=7

**old Rusty C10** · 11-27-2007, 09:45 PM

well we went out to our country house on tuesday and came back tonight. i didnt have my 82 with me but i had snagged a door on Ebay and picked it up today.. the guy had another one there for the other side so i got two doors for $65 and i was happy... hopefully this week ill have time to get the truck dumped ( its full of trash from a job) and then i can hang the new doors and the one fender

Low&Slow83 · 11-27-2007, 09:48 PM

nothing exciting. i put on a new distributor cap and rotor button though =D. im a little hsort on funds to do anything fun

87Bob · 11-27-2007, 09:55 PM

I chased my electric gremlins around in my 85. I think I found the last one hiding in my oil pressure sending unit. It will be replaced tomarrow. Tomarrow "Brown" should bring my new trim rings.

pcmcobra · 11-27-2007, 10:07 PM

Finally got my 6.0 lq9! My buddy in Houston and his family drove over. He told me about the motor awhile back, I said heck, bring it. He said he thinks it has a bent rod...
I dropped the oil pan today, and ouch, broken rod and cracked piston, and some cylinder wall scratches and a little gouging. I was a little depressed. I called him up and let him know, he said he will find another one in running condition. I really can't complain, for the price, it has heads, water pump, coil packs. Not sure if the block is worth saving or not. I really don't want to drop a ton of ca$h on a rotating assembly. I'll wait for another to come along. I know he'll pull through for me.
Other than that, cleaning house after a weeks worth of company.

**texassquarebodies** · 11-27-2007, 10:21 PM

I got my tool box organized. It took 3 hours. I found all the tools I thought I had lost. Nothing else to do on a cold and rainy day in Texas.

Eyegore · 11-27-2007, 10:30 PM

Well after 31 years with the city of phoenix in the civil engineering field I accepted a severance package for early retirement, so last Monday was my final day, now time to find another job, part-time at least.

cochino12 · 11-27-2007, 10:32 PM

Quote:

Originally Posted by Eyegore

Well after 31 years witht eh city of phoenix in the civil engineering field I accepted a severance package for early retirement, so last Monday was my final day, now time to find another job, part-time at least.

congrats on the retirement!!

bad_burb · 11-28-2007, 02:00 AM

Since I work on the actual weekend I ate lots of food on my "weekend". Mmmmm.

rfmaster · 11-28-2007, 02:14 AM

Replaced a leaky left valve cover gasket - trying to finish installing WBO sensor module.
Spent time with my in-laws. Did not watch any games on tube.

//RF

1970pelle · 11-28-2007, 08:53 AM

I'm still going through the 86 C10 I picked up a couple of weeks ago.I lost count of the bulbs I've replaced.Painted the cluster housing silver while apart.Replaced leaking valve cover gaskets.That turned into a major affair.The vacuum harness was brittle and crumbled.So the air pump and stuff are now resting in a box.I did find a mess when I lifted the valve covers.Seams the missed a couple of oil changes through the yaers.So VERY carefully with a 1 gal shop vac.Clean as much as I dared.Changed oil.I'll change oil & filter again in 500 miles.Then 1500 miles.But I'll be dropping the pan in the future anyway to replace the rear main.Next on the list is getting a different carb and possibly intake.Don't need this feedback unit.And exhaust.

Russell · 11-28-2007, 09:32 AM

Got my 80 up and running

killthewabbit · 11-28-2007, 10:55 AM

Wednesday evening - went to return the Honda Civic I've been driving for the past couple of months to it's rightful owner, who came back into town. Of course, the dash, parking, license plate and tail lights all decided to poop out on the way up to drop it off, so she had to bring it back on Saturday to troubleshoot.

Thursday - drove forever, ate, drove forever home

Friday - hung out with the kid all day since the wife had to work. That was a good day.

Saturday - a gazillion people came to the house to eat and stuff. Spent most of that time in the driveway trying to figure out the electrical gremlins in the Honda

Sunday - Titans lost embarrassingly bad to the Bengals, continued chasing electrical gremlins in the Honda. Ended up getting my butt kicked by the stupid Honda. I think maybe I have it narrowed down after spending a lot of time tucking my 6'5" and 240 lbs under the dash of a Civic that's smaller than my average poop.

Pyrotechnic · 11-28-2007, 02:14 PM

It was cold and rainy the entire time. I had planned to go hunting with my dad but that fell through because of the rain. After eating college cafeteria food for a semester, the home cooked food was a real treat.

I did work on the truck though. I connected the vacuum ball to the intake for the A/C and heater up so the heater and defroster would work if I needed it with the arrival of the cold weather.

Prerunner1982 · 11-28-2007, 03:44 PM

Built a 4'x8' porch on my house with my pops. I think it looks good for being a temporary porch for my prego wife during the winter. Was a good father-son project and only took about a day and a half.

**Captkaos** · 11-28-2007, 06:55 PM

Friday I had to fight to pull my y-pipe off my Jimmy so I could finish routing the fuel lines up to the TPI. I got the EFI lines together and made them match a little better. Hopefully putting them in soon.
Saturday I cleaned up the garage some so I could find everything again.

tvblazer78 · 11-28-2007, 10:51 PM

For one thing I had way to much food, But did get one day to work on the blazer. I orderd 100'sf of B-Quiet sound deadening and it came in on Friday so I started on it ASAP. It was very easy to work with, but it takes a long time to do just the front of my blazer and now I have to do the back

.

Here is a shot..

Trav

11-27-2007, 09:29 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	What did you get done? Thanksgiving edition 11/25 I hope everyone had a safe and Happy Thanksgiving. Since most of you had a long weekend, I will assume once the overeating of turkey was done you might have actually worked on your truck. I let my crew off so they could go try to shoot Bambi's Daddy, and take advantage of some of the Black Friday specials. Meanwhile I worked, and tried to chase down some rather elusive 3" donut gaskets. I thought I had them located when my bro-in-law called Excel Parts and they said they had a set. I went to will call to pick them up only to find they actually had 2.5" not 3". CRAP! I was headed to a muffler shop to see if they might have some when I stopped at a "real" autoparts. You know the old fashioned kind where they know what a part is without looking it up. And when you tell them it fits a 63 Corvette with a fuel injected 327, they don't peck at their computer then ask "2wd or 4wd". Anyway, I went to install them today and that was great fun. When I pulled the old ones almost all of the studs backed out of the manifold. The only way to get them back in was to drop the Y-pipe put all the studs in place, then hang the y-pipe again. Sounds pretty simple huh. Trust me, it's not. The disadvantage of running 3" Ramhorn manifolds is they are a "really" tight fit. I thought I was going to have to pull the freakin motor, but I finally got all of the studs snugged down.... What did you get done? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 11-27-2007 at 09:41 PM.

11-27-2007, 09:33 PM	#2
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: What did you get done? Thanksgiving edition 11/25 finally got the tires and wheels on my 72... I'm stoked more pics here....http://67-72chevytrucks.com/vboard/s...=201680&page=7 Attached Images

11-27-2007, 09:45 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: What did you get done? Thanksgiving edition 11/25 well we went out to our country house on tuesday and came back tonight. i didnt have my 82 with me but i had snagged a door on Ebay and picked it up today.. the guy had another one there for the other side so i got two doors for $65 and i was happy... hopefully this week ill have time to get the truck dumped ( its full of trash from a job) and then i can hang the new doors and the one fender __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-27-2007, 09:48 PM	#4
Low&Slow83 Registered User Join Date: Nov 2007 Location: Jacksonville, Florida Posts: 109	Re: What did you get done? Thanksgiving edition 11/25 nothing exciting. i put on a new distributor cap and rotor button though =D. im a little hsort on funds to do anything fun

11-27-2007, 09:55 PM	#5
87Bob Registered User Join Date: Nov 2007 Location: Franklin Indiana Posts: 635	Re: What did you get done? Thanksgiving edition 11/25 I chased my electric gremlins around in my 85. I think I found the last one hiding in my oil pressure sending unit. It will be replaced tomarrow. Tomarrow "Brown" should bring my new trim rings. Last edited by 87Bob; 11-27-2007 at 09:56 PM.

11-27-2007, 10:07 PM	#6
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: What did you get done? Thanksgiving edition 11/25 Finally got my 6.0 lq9! My buddy in Houston and his family drove over. He told me about the motor awhile back, I said heck, bring it. He said he thinks it has a bent rod... I dropped the oil pan today, and ouch, broken rod and cracked piston, and some cylinder wall scratches and a little gouging. I was a little depressed. I called him up and let him know, he said he will find another one in running condition. I really can't complain, for the price, it has heads, water pump, coil packs. Not sure if the block is worth saving or not. I really don't want to drop a ton of ca$h on a rotating assembly. I'll wait for another to come along. I know he'll pull through for me. Other than that, cleaning house after a weeks worth of company. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native Last edited by pcmcobra; 11-27-2007 at 10:08 PM.

11-27-2007, 10:21 PM	#7
texassquarebodies Truck Nut Join Date: Jun 2007 Location: Wills Point, Texas Posts: 407	Re: What did you get done? Thanksgiving edition 11/25 I got my tool box organized. It took 3 hours. I found all the tools I thought I had lost. Nothing else to do on a cold and rainy day in Texas. __________________ Tony Kee Texas Square Bodies

11-27-2007, 10:30 PM	#8
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: What did you get done? Thanksgiving edition 11/25 Well after 31 years with the city of phoenix in the civil engineering field I accepted a severance package for early retirement, so last Monday was my final day, now time to find another job, part-time at least. __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454 Last edited by Eyegore; 11-27-2007 at 10:54 PM.

11-28-2007, 02:00 AM	#10
bad_burb Registered User Join Date: Aug 2005 Location: Vallejo, California Posts: 659	Re: What did you get done? Thanksgiving edition 11/25 Since I work on the actual weekend I ate lots of food on my "weekend". Mmmmm. __________________ '73 C-30 3+3 Dually 454/TH400 '74 Fleetside 350/TH350 (SOLD) '69 Nova 350/TH350 (project FOR SALE) '63 Nova 305/TH350 3.73 posi (the wife's project)

11-28-2007, 02:14 AM	#11
rfmaster Registered User Join Date: Oct 2003 Location: OC CA Posts: 1,374	Re: What did you get done? Thanksgiving edition 11/25 Replaced a leaky left valve cover gasket - trying to finish installing WBO sensor module. Spent time with my in-laws. Did not watch any games on tube. //RF __________________ "The Beast" 1975 Chevrolet C20 longbed 350/700R4! with 3inch body lift Dual Flowmasters Super 40's! TBI retrofit completed (2007-07-29) New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)

11-28-2007, 08:53 AM	#12
1970pelle Registered User Join Date: Sep 2007 Location: N.E. Florida Posts: 500	Re: What did you get done? Thanksgiving edition 11/25 I'm still going through the 86 C10 I picked up a couple of weeks ago.I lost count of the bulbs I've replaced.Painted the cluster housing silver while apart.Replaced leaking valve cover gaskets.That turned into a major affair.The vacuum harness was brittle and crumbled.So the air pump and stuff are now resting in a box.I did find a mess when I lifted the valve covers.Seams the missed a couple of oil changes through the yaers.So VERY carefully with a 1 gal shop vac.Clean as much as I dared.Changed oil.I'll change oil & filter again in 500 miles.Then 1500 miles.But I'll be dropping the pan in the future anyway to replace the rear main.Next on the list is getting a different carb and possibly intake.Don't need this feedback unit.And exhaust.

11-28-2007, 09:32 AM	#13
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: What did you get done? Thanksgiving edition 11/25 Got my 80 up and running __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

11-28-2007, 10:55 AM	#14
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: What did you get done? Thanksgiving edition 11/25 Wednesday evening - went to return the Honda Civic I've been driving for the past couple of months to it's rightful owner, who came back into town. Of course, the dash, parking, license plate and tail lights all decided to poop out on the way up to drop it off, so she had to bring it back on Saturday to troubleshoot. Thursday - drove forever, ate, drove forever home Friday - hung out with the kid all day since the wife had to work. That was a good day. Saturday - a gazillion people came to the house to eat and stuff. Spent most of that time in the driveway trying to figure out the electrical gremlins in the Honda Sunday - Titans lost embarrassingly bad to the Bengals, continued chasing electrical gremlins in the Honda. Ended up getting my butt kicked by the stupid Honda. I think maybe I have it narrowed down after spending a lot of time tucking my 6'5" and 240 lbs under the dash of a Civic that's smaller than my average poop.

11-28-2007, 02:14 PM	#15
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: What did you get done? Thanksgiving edition 11/25 It was cold and rainy the entire time. I had planned to go hunting with my dad but that fell through because of the rain. After eating college cafeteria food for a semester, the home cooked food was a real treat. I did work on the truck though. I connected the vacuum ball to the intake for the A/C and heater up so the heater and defroster would work if I needed it with the arrival of the cold weather. Last edited by Pyrotechnic; 11-28-2007 at 02:14 PM.

11-28-2007, 03:44 PM	#16
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: What did you get done? Thanksgiving edition 11/25 Built a 4'x8' porch on my house with my pops. I think it looks good for being a temporary porch for my prego wife during the winter. Was a good father-son project and only took about a day and a half. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call



Register or Log In To remove these advertisements.

11-28-2007, 06:55 PM	#17
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: What did you get done? Thanksgiving edition 11/25 Friday I had to fight to pull my y-pipe off my Jimmy so I could finish routing the fuel lines up to the TPI. I got the EFI lines together and made them match a little better. Hopefully putting them in soon. Saturday I cleaned up the garage some so I could find everything again. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

11-28-2007, 10:51 PM	#18
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: What did you get done? Thanksgiving edition 11/25 For one thing I had way to much food, But did get one day to work on the blazer. I orderd 100'sf of B-Quiet sound deadening and it came in on Friday so I started on it ASAP. It was very easy to work with, but it takes a long time to do just the front of my blazer and now I have to do the back. Here is a shot.. Trav Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012 Last edited by tvblazer78; 11-29-2007 at 01:26 PM.

Register or Log In To remove these advertisements.