67 parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rio · 12-11-2007, 03:17 PM

I have a 67 chevy that I am parting out. It has a 3/4 frame. Motor is not for sale & there is no transmission. I do have a 283 in another truck if someone wants a motor. Let me know what you are interested in & I'll get back to you. I will ship but local pick up gets first choice.

*ksjh1316* · 12-11-2007, 03:21 PM

Interested in horn button pending price and better pic

Did this one have ram assist steering?

geoman · 12-11-2007, 03:24 PM

what's the grille and core support like? Any rust holes or weak spots in the metal?

Price on those please to 33811

Also, are you going to cut up the cab at all? I need some sheetmetal patches.

Thanks
Mike

*ksjh1316* · 12-11-2007, 03:41 PM

I'll have to pass just need the button pm me later if you split up good luck on the sales

geoman · 12-11-2007, 04:43 PM

Lower 12 inches or so along the entire back side.

67c-10Texas · 12-12-2007, 08:46 AM

second in line for grill - can pick up

**ScottH** · 12-12-2007, 09:06 AM

Can I get a pic and price on the rear view mirror?

Thanks.

rio · 12-12-2007, 09:38 AM

pic

geoman · 12-12-2007, 10:07 AM

going to pass on the grille for now. Its yours 67C-10Texas.

rio · 12-12-2007, 10:10 AM

Lower 12 inches or so along the entire back side.

I'll get back with you on this. i want to see if the cab will sell first. On the grill, I apologize but I decided to give first choice to local pick up. Thanks for your interest. rio

rio · 12-12-2007, 10:12 AM

second in line for grill - can pick up

I'm taking the grill off today. When do you want to get it?

**ScottH** · 12-12-2007, 10:51 AM

rio, thanks for the pic but looks like someone put a 72 mirror in it.

ocotillo rat · 12-12-2007, 11:04 AM

can you sell the exterior door handles, driver side and passenger side. If you can please post pictures of the handles and price.

thanks

rio · 12-12-2007, 12:30 PM

can you sell the exterior door handles, driver side and passenger side. If you can please post pictures of the handles and price.

Make me an offer.

ocotillo rat · 12-12-2007, 01:01 PM

thanks for the handle pic's, I am going to pass on this one.

Thanks again.

TruckinDaddy · 12-12-2007, 01:59 PM

How about the steering shaft or the entire steering column?

67c-10Texas · 12-12-2007, 04:37 PM

PM sent on the Grill - how is the apron - Piece between the bumper and grill - ???

rio · 12-13-2007, 10:06 AM

How about the steering shaft or the entire steering column?

The steering column is complete & works good. It used to be a "3 on tree" shifter but was changed so it has holes for it. Entire column with steering wheel $150. $100 for column alone.

67c-10Texas · 12-13-2007, 11:04 AM

i will pass on the grill - too many holes

rio · 12-13-2007, 04:17 PM

pic

yenko427 · 12-13-2007, 05:17 PM

how much for the inst. cluster will pick or ship to 77480

rio · 12-15-2007, 06:35 AM

I'm going to cut up the cab if anyone needs any sheet metal patches. I have to take the trailer back tomorrow so it will be junked then.

rio · 12-15-2007, 02:04 PM

tomorrow it will be junked.

Psycho71 · 12-15-2007, 03:46 PM

Is the kick panel vent handle assembly all there? I'm needing one for the passenger side, but it should be the same as the driver's side, so either one would work.

If so, how much shipped to 75142?

Thanks,
Jay

rio · 12-15-2007, 04:13 PM

I'll look for sure in the morning but I think they are in good shape. I'll send you a quote & pics then.
rio

12-11-2007, 03:17 PM	#1
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	67 parting out I have a 67 chevy that I am parting out. It has a 3/4 frame. Motor is not for sale & there is no transmission. I do have a 283 in another truck if someone wants a motor. Let me know what you are interested in & I'll get back to you. I will ship but local pick up gets first choice. Attached Images Last edited by rio; 12-15-2007 at 04:05 PM. Reason: added something

12-11-2007, 03:21 PM	#2
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 67 parting out Interested in horn button pending price and better pic Did this one have ram assist steering? Last edited by ksjh1316; 12-11-2007 at 03:22 PM.

12-11-2007, 03:24 PM	#3
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 parting out what's the grille and core support like? Any rust holes or weak spots in the metal? Price on those please to 33811 Also, are you going to cut up the cab at all? I need some sheetmetal patches. Thanks Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt Last edited by geoman; 12-11-2007 at 03:24 PM.

12-11-2007, 03:41 PM	#4
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 67 parting out I'll have to pass just need the button pm me later if you split up good luck on the sales

12-11-2007, 04:43 PM	#5
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 parting out Lower 12 inches or so along the entire back side. __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

12-12-2007, 08:46 AM	#6
67c-10Texas Registered User Join Date: Apr 2006 Location: Texas Posts: 259	Re: 67 parting out second in line for grill - can pick up

12-12-2007, 09:06 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 67 parting out Can I get a pic and price on the rear view mirror? Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-12-2007, 09:38 AM	#8
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out pic Attached Images Last edited by rio; 12-14-2007 at 05:07 PM.

12-12-2007, 10:07 AM	#9
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 67 parting out going to pass on the grille for now. Its yours 67C-10Texas. __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

12-12-2007, 10:10 AM	#10
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out Lower 12 inches or so along the entire back side. I'll get back with you on this. i want to see if the cab will sell first. On the grill, I apologize but I decided to give first choice to local pick up. Thanks for your interest. rio

12-12-2007, 10:12 AM	#11
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out second in line for grill - can pick up I'm taking the grill off today. When do you want to get it?

12-12-2007, 10:51 AM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 67 parting out rio, thanks for the pic but looks like someone put a 72 mirror in it. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-12-2007, 11:04 AM	#13
ocotillo rat Registered User Join Date: Sep 2006 Location: San diego Posts: 36	Re: 67 parting out can you sell the exterior door handles, driver side and passenger side. If you can please post pictures of the handles and price. thanks __________________ robert _____________________ 1972 Blazer, automatic transmision. FB385 fast burn 385hp Edl 1407 carb 750cfm 3.73 gears 4" lift

12-12-2007, 12:30 PM	#14
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out can you sell the exterior door handles, driver side and passenger side. If you can please post pictures of the handles and price. Make me an offer. Attached Images Last edited by rio; 12-14-2007 at 05:03 PM.

12-12-2007, 01:01 PM	#15
ocotillo rat Registered User Join Date: Sep 2006 Location: San diego Posts: 36	Re: 67 parting out thanks for the handle pic's, I am going to pass on this one. Thanks again. __________________ robert _____________________ 1972 Blazer, automatic transmision. FB385 fast burn 385hp Edl 1407 carb 750cfm 3.73 gears 4" lift



Register or Log In To remove these advertisements.

12-12-2007, 01:59 PM	#16
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	Re: 67 parting out How about the steering shaft or the entire steering column? __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page

12-12-2007, 04:37 PM	#17
67c-10Texas Registered User Join Date: Apr 2006 Location: Texas Posts: 259	Re: 67 parting out PM sent on the Grill - how is the apron - Piece between the bumper and grill - ???

12-13-2007, 10:06 AM	#18
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out How about the steering shaft or the entire steering column? The steering column is complete & works good. It used to be a "3 on tree" shifter but was changed so it has holes for it. Entire column with steering wheel $150. $100 for column alone.

12-13-2007, 11:04 AM	#19
67c-10Texas Registered User Join Date: Apr 2006 Location: Texas Posts: 259	Re: 67 parting out i will pass on the grill - too many holes

12-13-2007, 04:17 PM	#20
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out pic Attached Images Last edited by rio; 12-14-2007 at 05:06 PM.

12-13-2007, 05:17 PM	#21
yenko427 Registered User Join Date: Jun 2007 Location: Sweeny,Texas Posts: 96	Re: 67 parting out how much for the inst. cluster will pick or ship to 77480

12-15-2007, 06:35 AM	#22
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out I'm going to cut up the cab if anyone needs any sheet metal patches. I have to take the trailer back tomorrow so it will be junked then.

12-15-2007, 02:04 PM	#23
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out tomorrow it will be junked.

12-15-2007, 03:46 PM	#24
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: 67 parting out Is the kick panel vent handle assembly all there? I'm needing one for the passenger side, but it should be the same as the driver's side, so either one would work. If so, how much shipped to 75142? Thanks, Jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

12-15-2007, 04:13 PM	#25
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: 67 parting out I'll look for sure in the morning but I think they are in good shape. I'll send you a quote & pics then. rio

Register or Log In To remove these advertisements.