*new Usbody Fiberglass Frontend 68* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gunkis84 · 12-12-2007, 12:43 AM

just bought my starter truck.. and i came w/a few parts im not needing one being this new fiberglass one piece front end 68 style.. comes with back brackets for light mounting.. new cost $1500+ will sell for $600 firm.. will have actual photos up tom. but like i said this is NEW! ps. you prob wouldnt want me to ship this.. i live in greenville s. carolina

http://www.usbody.com

gunkis84 · 12-13-2007, 08:35 AM

top

gunkis84 · 12-14-2007, 03:49 AM

top

vtblazer · 12-15-2007, 01:42 AM

Is all the mounting hardware included and complete?

Could you post a better side view pic so I can see where it going to mate to the rear fender/firewall area please?

gunkis84 · 12-15-2007, 05:52 AM

i bought this truck last w/e and it came w/the front end, also 4 tubs of bolts and mounting hardware i just went through all of the stuff and i dont see the bottom halves of the hinges (he must have already dont the mock up bc the tops of the hinges are mounted to the frontend..) im sure the hardware is cheap from usbody.. i just looked again at their website and this front goes for 1800+ship.. thats the cowl induction split.. anyway here is the pic of the side

vtblazer · 12-15-2007, 12:28 PM

If we can figure out a way to get it into my hands, I'll take it.

I'm heading down to NJ semi soon, I know it's a long way away still but maybe we can leap frog it closer...I dunno?

gunkis84 · 12-15-2007, 07:34 PM

i can drive it up a little ways, but w/gas prices now, its hard to take it too far before i start losing money.. hope you understand. when you think youll be comin?

vtblazer · 12-16-2007, 12:05 AM

Quote:

Originally Posted by gunkis84

i can drive it up a little ways, but w/gas prices now, its hard to take it too far before i start losing money.. hope you understand. when you think youll be comin?

I completely understand.

I think we're about 2/3 weeks from getting the Elcamino finished up and ready for delivery.

I'll put a post in the tralering section.
(I think we still have that section)

gunkis84 · 12-16-2007, 07:45 AM

sound good.. hey i just found out that some of my friends are comin up to new hampshire (my wife told me, so i dont yet if they are driving their truck) if they are i might be able to talk them into bringing it up there around christmas time.. town they are goin to is New Ipswich around keen area.. ill let you know for sure about that

vtblazer · 12-16-2007, 08:20 AM

Quote:

Originally Posted by gunkis84

sound good.. hey i just found out that some of my friends are comin up to new hampshire (my wife told me, so i dont yet if they are driving their truck) if they are i might be able to talk them into bringing it up there around christmas time.. town they are goin to is New Ipswich around keen area.. ill let you know for sure about that

That'd be awesome, I have a buddy who lives there and would be able to store it until I got there to pick it up.

*FormerMember* · 12-16-2007, 10:35 AM

Quote:

Originally Posted by vtblazer

That'd be awesome, I have a buddy who lives there and would be able to store it until I got there to pick it up.

Not sure if this is me, but I am happy to do so, Kurt.

vtblazer · 12-16-2007, 11:48 AM

Quote:

Originally Posted by grendel

Not sure if this is me, but I am happy to do so, Kurt.

Appreciate the offer and will note it as a back up plan.

Greg lives right in Keene, he may be a little closer...dunno.

LUV2XCLR8 · 12-16-2007, 11:50 AM

Sounds like a plan, throw a lil gas $ towards them and I know they will get it to ya.

This is why I Luv this place so much, everyones looking out to help each other

gunkis84 · 12-17-2007, 04:55 PM

hey vt, i just found out that my friends decided not to go to NH for christmas.. sorry man, other than that im not sure what else to do.. let me know thanks

vtblazer · 12-18-2007, 01:47 AM

Just over 1K each way.

All I can hope for is a ride for it from the post in the transportation section.

If it can get brought up to or near Browns Mills NJ, I can gather it up from there.

If you can sell it, then sell it.
Can't ask you to hold it waiting on a random connection to happen.

centsless · 12-18-2007, 04:18 AM

I am in northeastern MD. Get it close to here and I will store/ help deliver...

vtblazer · 12-18-2007, 08:06 AM

Quote:

Originally Posted by centsless

I am in northeastern MD. Get it close to here and I will store/ help deliver...

That'd be close enough for me to pick up at least, thanks for the offer.

gunkis84 · 12-18-2007, 04:32 PM

frontend is sold.. sorry it couldn't work out vt thanks anyway

12-12-2007, 12:43 AM	#1
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	*new Usbody Fiberglass Frontend 68* just bought my starter truck.. and i came w/a few parts im not needing one being this new fiberglass one piece front end 68 style.. comes with back brackets for light mounting.. new cost $1500+ will sell for $600 firm.. will have actual photos up tom. but like i said this is NEW! ps. you prob wouldnt want me to ship this.. i live in greenville s. carolina http://www.usbody.com Last edited by gunkis84; 12-12-2007 at 03:20 PM.

12-13-2007, 08:35 AM	#2
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: new Usbody Fiberglass Frontend 68 top Last edited by gunkis84; 12-14-2007 at 03:44 AM.

12-14-2007, 03:49 AM	#3
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: new Usbody Fiberglass Frontend 68 top

12-15-2007, 01:42 AM	#4
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: new Usbody Fiberglass Frontend 68 Is all the mounting hardware included and complete? Could you post a better side view pic so I can see where it going to mate to the rear fender/firewall area please? Last edited by vtblazer; 12-15-2007 at 01:44 AM.

12-15-2007, 05:52 AM	#5
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: new Usbody Fiberglass Frontend 68 i bought this truck last w/e and it came w/the front end, also 4 tubs of bolts and mounting hardware i just went through all of the stuff and i dont see the bottom halves of the hinges (he must have already dont the mock up bc the tops of the hinges are mounted to the frontend..) im sure the hardware is cheap from usbody.. i just looked again at their website and this front goes for 1800+ship.. thats the cowl induction split.. anyway here is the pic of the side

12-15-2007, 12:28 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: new Usbody Fiberglass Frontend 68 If we can figure out a way to get it into my hands, I'll take it. I'm heading down to NJ semi soon, I know it's a long way away still but maybe we can leap frog it closer...I dunno?

12-15-2007, 07:34 PM	#7
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: new Usbody Fiberglass Frontend 68 i can drive it up a little ways, but w/gas prices now, its hard to take it too far before i start losing money.. hope you understand. when you think youll be comin?

12-16-2007, 07:45 AM	#9
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: new Usbody Fiberglass Frontend 68 sound good.. hey i just found out that some of my friends are comin up to new hampshire (my wife told me, so i dont yet if they are driving their truck) if they are i might be able to talk them into bringing it up there around christmas time.. town they are goin to is New Ipswich around keen area.. ill let you know for sure about that

12-16-2007, 11:50 AM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: new Usbody Fiberglass Frontend 68 Sounds like a plan, throw a lil gas $ towards them and I know they will get it to ya. This is why I Luv this place so much, everyones looking out to help each other __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-17-2007, 04:55 PM	#14
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: new Usbody Fiberglass Frontend 68 hey vt, i just found out that my friends decided not to go to NH for christmas.. sorry man, other than that im not sure what else to do.. let me know thanks

12-18-2007, 01:47 AM	#15
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: new Usbody Fiberglass Frontend 68 Just over 1K each way. All I can hope for is a ride for it from the post in the transportation section. If it can get brought up to or near Browns Mills NJ, I can gather it up from there. If you can sell it, then sell it. Can't ask you to hold it waiting on a random connection to happen.

12-18-2007, 04:18 AM	#16
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: new Usbody Fiberglass Frontend 68 I am in northeastern MD. Get it close to here and I will store/ help deliver... __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

12-18-2007, 04:32 PM	#18
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: new Usbody Fiberglass Frontend 68 frontend is sold.. sorry it couldn't work out vt thanks anyway



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.