One Piece Window Kit??? Anyone have it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hazieview · 12-14-2007, 12:53 PM

I was wondering how good the one piece window kits actually were. I have a 1987 short bed chevy that I was thinking about putting the one piece window kit in but I didn't know how good it was. It sure is expensive for such a modification. has anyone purchased and/or installed one of these kits? How do you like it? Was it worth the money? Any complaints? What happens if your window get smashed? Do you have to order a new custom window for 2 million dollars or what? Thanks for your help!

**old Rusty C10** · 12-14-2007, 01:24 PM

i believe that some of our vendors sell them here you may want to check with them..

killthewabbit · 12-14-2007, 01:25 PM

73-87chevytrucks.com has them. PM Captkaos

**Captkaos** · 12-14-2007, 02:38 PM

I haven't got mine installed yet, but I believe it is worth it for what comes with the kit. If the glass is smashed you would have to purchase a new piece from the manufacturer.

spudz · 12-14-2007, 04:02 PM

huh thats pretty neat!

redsled04 · 12-14-2007, 06:21 PM

I tried some and took them out. The fit like S--T. Good luck with them they look killer if you can get them to work.Put them in before you do any paint work cause there is definatly some bending involved. I could never get them up all the way though. with out about breaking them.

**Captkaos** · 12-14-2007, 07:26 PM

How far did they go before stopping?

poolboy65-ls1 · 12-16-2007, 03:35 AM

I've been wanting some. They do cost alot for them not to fit right. Anyone else have a problem with them?

impala_631 · 12-17-2007, 06:44 AM

i think it makes it look ugly without the wing window

Pyrotechnic · 12-17-2007, 06:22 PM

I honestly think the vent windows are just part of the style of these trucks. Replace the gasket and seal them up and leave them.

I've looked at the slot in the door for the glass, and the contour changes right where the vent window starts. You would need to some major body work on the door to make the slot uniform all the way around. It certainly can be done but don't let anyone tell you those kits are bolt in.

12-14-2007, 12:53 PM	#1
Hazieview Building Dreams out of Dimes! Join Date: May 2005 Location: Bonham, Tx Posts: 892	One Piece Window Kit??? Anyone have it? I was wondering how good the one piece window kits actually were. I have a 1987 short bed chevy that I was thinking about putting the one piece window kit in but I didn't know how good it was. It sure is expensive for such a modification. has anyone purchased and/or installed one of these kits? How do you like it? Was it worth the money? Any complaints? What happens if your window get smashed? Do you have to order a new custom window for 2 million dollars or what? Thanks for your help!

12-14-2007, 01:24 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,287	Re: One Piece Window Kit??? Anyone have it? i believe that some of our vendors sell them here you may want to check with them.. __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-14-2007, 01:25 PM	#3
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: One Piece Window Kit??? Anyone have it? 73-87chevytrucks.com has them. PM Captkaos

12-14-2007, 02:38 PM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: One Piece Window Kit??? Anyone have it? I haven't got mine installed yet, but I believe it is worth it for what comes with the kit. If the glass is smashed you would have to purchase a new piece from the manufacturer. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

12-14-2007, 04:02 PM	#5
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: One Piece Window Kit??? Anyone have it? huh thats pretty neat! __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

12-14-2007, 06:21 PM	#6
redsled04 Registered User Join Date: Nov 2007 Location: Maple valley WA. Posts: 128	Re: One Piece Window Kit??? Anyone have it? I tried some and took them out. The fit like S--T. Good luck with them they look killer if you can get them to work.Put them in before you do any paint work cause there is definatly some bending involved. I could never get them up all the way though. with out about breaking them.

12-14-2007, 07:26 PM	#7
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: One Piece Window Kit??? Anyone have it? How far did they go before stopping? __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

12-16-2007, 03:35 AM	#8
poolboy65-ls1 iamthepoolboy! Join Date: Jun 2004 Location: Benton Arkansas Posts: 175	Re: One Piece Window Kit??? Anyone have it? I've been wanting some. They do cost alot for them not to fit right. Anyone else have a problem with them? __________________ Black primed 81 Silverado SWB one owner rust free all original 106,000 project. Steel cowl hood, 89/91 front grill, Blazer tailgate trim, sport rear bumper, 5/6 Drop, 17" Eagle Alloys, Big block is on the stand! COMING SOON: one piece glass, and more.

12-17-2007, 06:44 AM	#9
impala_631 :( BYEBYE :( Join Date: Sep 2007 Location: terre haute indiana Posts: 200	Re: One Piece Window Kit??? Anyone have it? i think it makes it look ugly without the wing window __________________ THE IMPALA 74 C-10 "SNOTTROCKET"BUILD UP http://www.layitlow.com/forums/index...owtopic=370899

12-17-2007, 06:22 PM	#10
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: One Piece Window Kit??? Anyone have it? I honestly think the vent windows are just part of the style of these trucks. Replace the gasket and seal them up and leave them. I've looked at the slot in the door for the glass, and the contour changes right where the vent window starts. You would need to some major body work on the door to make the slot uniform all the way around. It certainly can be done but don't let anyone tell you those kits are bolt in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.