Engine Parts and Misc. in Deer Park, TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cameeks · 12-23-2007, 09:04 PM

Scat Series 9000 Cast Pro Comp Stroker Lightweight Crank
383 ci., 350 Main, 3.750" Stroke, 6.000" Rod Length
$75.00 (sold to hotrod 80)

Eagle ''ESP'' H-Beam Connecting Rods
327-400ci Large 2.100'' Crank Journal - 5.850'' Long (+.150), 650-grams $200.00

Autometer Phantom 2 5/8 mech. trans temp gauge
$40.00

All of the above has never been installed and is new

Stock 350 heads with valves and springs (no ship)
$50.00

Performer RPM intake with holly 650 (needs rebuilt)
$100.00 (sold to Hotrod 80)

350 block "0.060 bore (no ship)
$50.00

1978 Camaro parking light assemblies and head light bezels
$20.00

2nd Gen Camaro rear wing (no ship)
$20.00

2nd Gen Camaro Front and rear after market sway bars (no ship)
$40.00

2nd Gen Camaro T-tops (no ship)
$80.00

TH-350 rebuilt in 2000 less then 1 mile
$80.00 (sold to STP67-72)

Powerglide needs rebuilt. (Lost all gears and never looked into it so I got a used 700r4)
$40.00 (sold to Hotrod 80)

Sony trunk mount 10 disc cd changer
$50.00

2 cat-eye 49cc pocket bikes. Both need throtle cables and pull starts. Parts can be found on Ebay
$100.00 for both (will not split or ship them)

Stock gas tank w/ clips and bolts (Smelled no fumes in cab and gas came out clear when poured out through the cap) (no ship)
$30.00

'69 bench seat w/ cover (no ship)
$50.00

**nightmare** · 12-24-2007, 05:41 AM

Quote:

Originally Posted by cameeks

Autometer Phantom 2 5/8 mech. trans temp gauge
$40.00

2nd Gen Camaro Front and rear after market sway bars
$40.00

Would you happen to have any pics of these?

dirtball · 12-24-2007, 06:51 AM

Almost afraid to ask..... can you get me a shipping quote on the crank to 80526?
I may be interested if the shipping isn't too much. Brett

cameeks · 12-24-2007, 08:50 AM

Quote:

Originally Posted by dirtball

Almost afraid to ask..... can you get me a shipping quote on the crank to 80526?
I may be interested if the shipping isn't too much. Brett

looks like around $35

cameeks · 12-24-2007, 08:55 AM

Quote:

Originally Posted by nightmare

Would you happen to have any pics of these?

**nightmare** · 12-24-2007, 03:47 PM

PM sent

Dylans72 · 12-24-2007, 05:15 PM

can you post pics of the scat series 9000 383 ci kit?

cameeks · 12-24-2007, 06:11 PM

It is just the crank I'll get some pics of it soon

cameeks · 12-25-2007, 09:40 PM

Any questions please post here befor you PM to keep the order of who is in line on something straight.

Dylans72 · 12-26-2007, 03:34 AM

any pics of that crank? how much to ship to 24055 ? has it ever been used?

**STP67-72** · 12-26-2007, 04:11 AM

Hey Cameeks
I will take the turbo 350 if it is all there. It should be ok for a driver as long as it has been indoors. I want be able to pick up after 1st of year. I am in the middle of building a new shop. I can pay up front. Also if it is not in your way and not to much trouble, you could bring it to the 2nd board meet at the dragstrip. Just let me know.
Merry X-Mas

cameeks · 12-26-2007, 07:39 AM

Quote:

Originally Posted by STP67-72

Hey Cameeks
I will take the turbo 350 if it is all there. It should be ok for a driver as long as it has been indoors. I want be able to pick up after 1st of year. I am in the middle of building a new shop. I can pay up front. Also if it is not in your way and not to much trouble, you could bring it to the 2nd board meet at the dragstrip. Just let me know.
Merry X-Mas

No problem Steve. I can bring it there if you are still interested. Hopefully Ill have my bed back on by then

cameeks · 12-26-2007, 07:40 AM

I'll be taking pics of what people ask for after Christmas due to me running my @$$ off to everyones house

hotrod 80 · 12-26-2007, 02:45 PM

Put me in line for the crank . I'm in baytown and don't need shipping . Paypal is alao an option for payment .

hotrod 80 · 12-26-2007, 03:01 PM

Also interested in the powerglide . Thanks

Dylans72 · 12-26-2007, 04:53 PM

put me in line behind hot 80 for the crank.

cameeks · 12-26-2007, 06:10 PM

Looks like dirtball is going to get the crank.

Hotrod 80 I also have all of the linkages going from the column to the trans to go with the powerglide. When would you want to get it

hotrod 80 · 12-26-2007, 06:58 PM

Go ahead and put me down for the carb and intake also .

cameeks · 12-27-2007, 03:56 PM

Quote:

Originally Posted by hotrod 80

Go ahead and put me down for the carb and intake also .

got you

cameeks · 12-29-2007, 02:19 AM

Updated list

Dylans72 · 12-29-2007, 09:59 AM

if hotrod 80 bacs out for the crank i will take it. send me info on shiiping to 24055 and how you want your money.

cameeks · 12-29-2007, 01:26 PM

Got to meet Hotrod 80 today

Still some stuff left to get rid of.

Still waiting to hear back from nightmare on the gauge

hotrod 80 · 12-31-2007, 06:52 AM

TTT , The rods are sweet brand new in the plastic . Block is also nice .

cameeks · 01-09-2008, 08:21 PM

Updated list

HavinSomeFun · 01-10-2008, 03:10 AM

I will take the tank if you can ship it reasonable. Zip 72022 PM me total cost

12-23-2007, 09:04 PM	#1
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Engine Parts and Misc. in Deer Park, TX Scat Series 9000 Cast Pro Comp Stroker Lightweight Crank 383 ci., 350 Main, 3.750" Stroke, 6.000" Rod Length $75.00 (sold to hotrod 80) Eagle ''ESP'' H-Beam Connecting Rods 327-400ci Large 2.100'' Crank Journal - 5.850'' Long (+.150), 650-grams $200.00 Autometer Phantom 2 5/8 mech. trans temp gauge $40.00 *All of the above has never been installed and is new* Stock 350 heads with valves and springs (no ship) $50.00 Performer RPM intake with holly 650 (needs rebuilt) $100.00 (sold to Hotrod 80) 350 block "0.060 bore (no ship) $50.00 1978 Camaro parking light assemblies and head light bezels $20.00 2nd Gen Camaro rear wing (no ship) $20.00 2nd Gen Camaro Front and rear after market sway bars (no ship) $40.00 2nd Gen Camaro T-tops (no ship) $80.00 TH-350 rebuilt in 2000 less then 1 mile $80.00 (sold to STP67-72) Powerglide needs rebuilt. (Lost all gears and never looked into it so I got a used 700r4) $40.00 (sold to Hotrod 80) Sony trunk mount 10 disc cd changer $50.00 2 cat-eye 49cc pocket bikes. Both need throtle cables and pull starts. Parts can be found on Ebay $100.00 for both (will not split or ship them) Stock gas tank w/ clips and bolts (Smelled no fumes in cab and gas came out clear when poured out through the cap) (no ship) $30.00 '69 bench seat w/ cover (no ship) $50.00 __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules Last edited by cameeks; 01-10-2008 at 07:02 AM.

12-24-2007, 06:51 AM	#3
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: Engine Parts and Misc. in Deer Park, TX Almost afraid to ask..... can you get me a shipping quote on the crank to 80526? I may be interested if the shipping isn't too much. Brett

12-24-2007, 05:15 PM	#7
Dylans72 Registered User Join Date: Jul 2007 Location: bassett virgina Posts: 134	Re: Engine Parts and Misc. in Deer Park, TX can you post pics of the scat series 9000 383 ci kit?

12-24-2007, 06:11 PM	#8
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Engine Parts and Misc. in Deer Park, TX It is just the crank I'll get some pics of it soon __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-25-2007, 09:40 PM	#9
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Engine Parts and Misc. in Deer Park, TX Any questions please post here befor you PM to keep the order of who is in line on something straight. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-26-2007, 03:34 AM	#10
Dylans72 Registered User Join Date: Jul 2007 Location: bassett virgina Posts: 134	Re: Engine Parts and Misc. in Deer Park, TX any pics of that crank? how much to ship to 24055 ? has it ever been used?

12-26-2007, 04:11 AM	#11
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,666	Re: Engine Parts and Misc. in Deer Park, TX Hey Cameeks I will take the turbo 350 if it is all there. It should be ok for a driver as long as it has been indoors. I want be able to pick up after 1st of year. I am in the middle of building a new shop. I can pay up front. Also if it is not in your way and not to much trouble, you could bring it to the 2nd board meet at the dragstrip. Just let me know. Merry X-Mas __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

12-26-2007, 07:40 AM	#13
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Engine Parts and Misc. in Deer Park, TX I'll be taking pics of what people ask for after Christmas due to me running my @$$ off to everyones house __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-26-2007, 02:45 PM	#14
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Engine Parts and Misc. in Deer Park, TX Put me in line for the crank . I'm in baytown and don't need shipping . Paypal is alao an option for payment .

12-26-2007, 03:01 PM	#15
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Engine Parts and Misc. in Deer Park, TX Also interested in the powerglide . Thanks

12-26-2007, 04:53 PM	#16
Dylans72 Registered User Join Date: Jul 2007 Location: bassett virgina Posts: 134	Re: Engine Parts and Misc. in Deer Park, TX put me in line behind hot 80 for the crank.

12-26-2007, 06:10 PM	#17
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Engine Parts and Misc. in Deer Park, TX Looks like dirtball is going to get the crank. Hotrod 80 I also have all of the linkages going from the column to the trans to go with the powerglide. When would you want to get it __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-26-2007, 06:58 PM	#18
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Engine Parts and Misc. in Deer Park, TX Go ahead and put me down for the carb and intake also .

12-29-2007, 02:19 AM	#20
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Engine Parts and Misc. in Deer Park, TX Updated list __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-29-2007, 09:59 AM	#21
Dylans72 Registered User Join Date: Jul 2007 Location: bassett virgina Posts: 134	Re: Engine Parts and Misc. in Deer Park, TX if hotrod 80 bacs out for the crank i will take it. send me info on shiiping to 24055 and how you want your money.



Register or Log In To remove these advertisements.

12-29-2007, 01:26 PM	#22
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Engine Parts and Misc. in Deer Park, TX Got to meet Hotrod 80 today Still some stuff left to get rid of. Still waiting to hear back from nightmare on the gauge __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-31-2007, 06:52 AM	#23
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Engine Parts and Misc. in Deer Park, TX TTT , The rods are sweet brand new in the plastic . Block is also nice .

01-09-2008, 08:21 PM	#24
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Engine Parts and Misc. in Deer Park, TX Updated list __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

01-10-2008, 03:10 AM	#25
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: Engine Parts and Misc. in Deer Park, TX I will take the tank if you can ship it reasonable. Zip 72022 PM me total cost __________________ a green one with some stuff done to it....

Register or Log In To remove these advertisements.