WTB: Rear Cross sill for 8' fleet w/ wood bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rlm316 · 01-05-2008, 06:34 AM

Would anyone have the rear cross sill for a wood bed? The PO cut out a large chunk out of the center to install a roll pan. I am going to use a sport bumper so all the affected area can be seen in the area above the bumper and below the bed. I only need about a foot total of the sill but any help will do. Just let me know what you need for the part. Shipping would be to 08098. Thanks in advance, Lane

meathead95 · 01-05-2008, 07:02 AM

if you are willing to use aftermarket i believe they reproduce those now try giving tim a call at www.christiansclassics.com he is a great guy to deal with

rlm316 · 01-05-2008, 08:11 AM

I really just wanted to weld in a patch and not replace the whole part.

rlm316 · 01-06-2008, 02:06 AM

ttt

**t korinek** · 01-06-2008, 08:00 PM

If steel & wood are the same from the back I have a section from a steel floor bed.

rlm316 · 01-09-2008, 01:36 AM

Thanks for the reply. I went to the local yard and found a steel bed on a truck they were crushing. (What a shame, perfect 6' bed sides.) They are cutting the piece out for me. I will let you know if the sills are the same.
Thanks, Lane

WORNBRAKES · 01-09-2008, 05:27 PM

If the other dont work out, send me a PM and I will cut out a 1 foot section from a bad wood bed I have for 30 shipped.

rlm316 · 01-10-2008, 03:45 AM

That sounds like a plan. I will let you know how the piece from the yard works. Thanks for the reply, Lane.

01-05-2008, 06:34 AM	#1
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	WTB: Rear Cross sill for 8' fleet w/ wood bed Would anyone have the rear cross sill for a wood bed? The PO cut out a large chunk out of the center to install a roll pan. I am going to use a sport bumper so all the affected area can be seen in the area above the bumper and below the bed. I only need about a foot total of the sill but any help will do. Just let me know what you need for the part. Shipping would be to 08098. Thanks in advance, Lane Last edited by rlm316; 01-05-2008 at 06:35 AM. Reason: added info.

01-05-2008, 07:02 AM	#2
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: WTB: Rear Cross sill for 8' fleet w/ wood bed if you are willing to use aftermarket i believe they reproduce those now try giving tim a call at www.christiansclassics.com he is a great guy to deal with __________________ 72 2wd blazer 72 swb 4x4

01-05-2008, 08:11 AM	#3
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB: Rear Cross sill for 8' fleet w/ wood bed I really just wanted to weld in a patch and not replace the whole part.

01-06-2008, 02:06 AM	#4
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB: Rear Cross sill for 8' fleet w/ wood bed ttt

01-06-2008, 08:00 PM	#5
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB: Rear Cross sill for 8' fleet w/ wood bed If steel & wood are the same from the back I have a section from a steel floor bed. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

01-09-2008, 01:36 AM	#6
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB: Rear Cross sill for 8' fleet w/ wood bed Thanks for the reply. I went to the local yard and found a steel bed on a truck they were crushing. (What a shame, perfect 6' bed sides.) They are cutting the piece out for me. I will let you know if the sills are the same. Thanks, Lane

01-09-2008, 05:27 PM	#7
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: WTB: Rear Cross sill for 8' fleet w/ wood bed If the other dont work out, send me a PM and I will cut out a 1 foot section from a bad wood bed I have for 30 shipped. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

01-10-2008, 03:45 AM	#8
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB: Rear Cross sill for 8' fleet w/ wood bed That sounds like a plan. I will let you know how the piece from the yard works. Thanks for the reply, Lane.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.