WTT for manual tilt column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71 super · 01-06-2008, 06:03 AM

I would really like to have a manual tilt column, more than my speed alert or auto tilt or a set of 68-71 BB engine stands. I f you are interested in a trade PM me so we can work out the details.

*1972Ryan* · 01-06-2008, 07:46 AM

Somebody help him out.....He's a great guy, helped me a lot.

71 super · 01-06-2008, 11:50 AM

ttt

msgross · 01-06-2008, 12:07 PM

why not convert your auto tilt? I have only seen a few man tilts and they were $$$.

71 super · 01-06-2008, 12:51 PM

It is a nice tight factory auto truck tilt not van, still has the GM sticker on the lower portion of the tube even, just hate to cut it up. If I could find M/T upper column parts I might convert it over, but it is too nice or that right now.

**jerry moss** · 01-06-2008, 03:41 PM

maybe you can sell the original auto tilt and buy a van tilt to convert to a manual tilt. i used to have all the goodies to make a 4 speed tilt out of an auto column but traded them to bill at vintage chevy truck out here in fremont ca.

otsenre · 01-06-2008, 04:53 PM

A friend of mine has one. He will not want to trade, but I am sure he will sell. Let me go by there tommorrow and get details.

**PICKMUP** · 01-06-2008, 05:48 PM

Are you interested in a new Flaming River floor shift tilt?

**special-K** · 01-06-2008, 06:10 PM

I`m either buying a Flaming River or making one from a van tilt.How hard is it to convert?

msgross · 01-06-2008, 08:06 PM

I did see a few different ways to convert.... one welded and the other purchased a plastic sleeve column. I wouldn't convert an original auto truck tilt but am going to so a van tilt... I bought the collar parts for it of the board here...

**special-K** · 01-07-2008, 05:26 AM

I have a van tilt I want to convert.

jaros44sr · 01-07-2008, 06:08 AM

LMK when you guys, get around to working on your tilts. I have a floor shift upper column pc. that I have to swap out. Not sure what work is involved, just have some disassembly pics.

Hijack off

71 super · 01-09-2008, 10:32 AM

Frank i would like to stay with the original theme on the truck. But those flaming river pieces of yours are really tempting. Iwill have to think about that. PM me some prices. Thanks

**KevsClassics** · 01-11-2008, 05:14 PM

CHECK THIS OUT ALL WORK ALREADY DONE JUST BOLT IT ON & PLUG IT IN.http://67-72chevytrucks.com/vboard/s...highlight=tilt

71 super · 01-16-2008, 09:48 AM

ttt one more time

wasteaway · 01-16-2008, 01:45 PM

Would you be interested in selling the auto tilt you have? I have no trade. Just a one owner, all original, '71 GMC LB that I'm planning to restore as soon as the barn (garage) is completed. This site is my first, and best source for information so far. Just lurking.........and learning.

71 super · 01-16-2008, 02:20 PM

I have spoken to Kevin and plan on buying his. I will keep you in mind if I decide to sell the auto column, but do not want to sell it right now. Thanks 71 super

01-06-2008, 06:03 AM	#1
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	WTT for manual tilt column I would really like to have a manual tilt column, more than my speed alert or auto tilt or a set of 68-71 BB engine stands. I f you are interested in a trade PM me so we can work out the details.

01-06-2008, 07:46 AM	#2
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: WTT for manual tilt column Somebody help him out.....He's a great guy, helped me a lot.

01-06-2008, 11:50 AM	#3
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: WTT for manual tilt column ttt

01-06-2008, 12:07 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTT for manual tilt column why not convert your auto tilt? I have only seen a few man tilts and they were $$$. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-06-2008, 12:51 PM	#5
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: WTT for manual tilt column It is a nice tight factory auto truck tilt not van, still has the GM sticker on the lower portion of the tube even, just hate to cut it up. If I could find M/T upper column parts I might convert it over, but it is too nice or that right now.

01-06-2008, 03:41 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	Re: WTT for manual tilt column maybe you can sell the original auto tilt and buy a van tilt to convert to a manual tilt. i used to have all the goodies to make a 4 speed tilt out of an auto column but traded them to bill at vintage chevy truck out here in fremont ca. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-06-2008, 04:53 PM	#7
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: WTT for manual tilt column A friend of mine has one. He will not want to trade, but I am sure he will sell. Let me go by there tommorrow and get details.

01-06-2008, 05:48 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: WTT for manual tilt column Are you interested in a new Flaming River floor shift tilt? Attached Images

01-06-2008, 06:10 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTT for manual tilt column I`m either buying a Flaming River or making one from a van tilt.How hard is it to convert? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-06-2008, 08:06 PM	#10
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTT for manual tilt column I did see a few different ways to convert.... one welded and the other purchased a plastic sleeve column. I wouldn't convert an original auto truck tilt but am going to so a van tilt... I bought the collar parts for it of the board here... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-07-2008, 05:26 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTT for manual tilt column I have a van tilt I want to convert. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-07-2008, 06:08 AM	#12
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,466	Re: WTT for manual tilt column LMK when you guys, get around to working on your tilts. I have a floor shift upper column pc. that I have to swap out. Not sure what work is involved, just have some disassembly pics. Hijack off __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-09-2008, 10:32 AM	#13
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: WTT for manual tilt column Frank i would like to stay with the original theme on the truck. But those flaming river pieces of yours are really tempting. Iwill have to think about that. PM me some prices. Thanks

01-11-2008, 05:14 PM	#14
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: WTT for manual tilt column CHECK THIS OUT ALL WORK ALREADY DONE JUST BOLT IT ON & PLUG IT IN.http://67-72chevytrucks.com/vboard/s...highlight=tilt

01-16-2008, 09:48 AM	#15
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: WTT for manual tilt column ttt one more time



Register or Log In To remove these advertisements.

01-16-2008, 01:45 PM	#16
wasteaway Registered User Join Date: Jan 2008 Location: Exeter RI Posts: 30	Re: WTT for manual tilt column Would you be interested in selling the auto tilt you have? I have no trade. Just a one owner, all original, '71 GMC LB that I'm planning to restore as soon as the barn (garage) is completed. This site is my first, and best source for information so far. Just lurking.........and learning.

01-16-2008, 02:20 PM	#17
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: WTT for manual tilt column I have spoken to Kevin and plan on buying his. I will keep you in mind if I decide to sell the auto column, but do not want to sell it right now. Thanks 71 super

Register or Log In To remove these advertisements.