71 High Hump A/c Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**uncle** · 01-08-2008, 11:28 AM

NOW PARTING!!!!!! It is a 72 big block,a/c,GMC 20 Sierra Grande cab as it sits now. Everything in pics is included. $750. Needs outer rockers,d/s floor patch, and patching on one cab corner. Also needs patching where someone cut out the kickpanels. Both doors have a few small pinholes where I showed the pic on the drivers door. It does have some small dents on the back of the cab also. Please respond to post. NOW PARTING!!!!!!!!!!!!!!!

**uncle** · 01-08-2008, 11:30 AM

More pics. It has a White houndstooth seat and a good dashpad also.

**uncle** · 01-08-2008, 11:30 AM

One more.

**68350** · 01-08-2008, 12:26 PM

if you decide to sell the tilt, please let me know. thanks

**uncle** · 01-09-2008, 10:30 AM

Bump.

**uncle** · 01-10-2008, 03:51 PM

One More Time!

**uncle** · 01-13-2008, 04:36 PM

All prices do NOT include shipping. Tilt $300,Doors bare $250 ( No shipping),Door panels,visors and headliner$125,floor hump $50,seat $50(No shipping),Dash pad $65, Bare cab $200 OBO, glove box lid and cluster $75. Please respond to post.

72highlander · 01-13-2008, 05:07 PM

how are the door panels. is the grain still good and do they have any extra holes?

**uncle** · 01-14-2008, 02:45 AM

I'll get some pics this afternoon.

**68350** · 01-14-2008, 04:54 AM

I will pass on the tilt, thanks anyways. ~doug

RJGeister · 01-14-2008, 08:09 AM

Uncle,
Is that a rear slider in the cab? If so, what do you want for it? I will pick it up.

Thanks,
Rich

**uncle** · 01-14-2008, 11:51 AM

Pics for 72 highlander. Panels do have scuffs on them. Tried to show in the pics. $40 for the rear slider and it's not a factory one.

72highlander · 01-15-2008, 02:53 PM

thanks for the pics, mine are nice, one has a little wear and other has a few extra holes, but i'm looking for some primo ones, thanks though.

**uncle** · 01-15-2008, 02:57 PM

If you can't find any,I've been told more than once that the green ones are the ones to dye.

**uncle** · 01-18-2008, 05:08 AM

Bump.

meathead95 · 01-18-2008, 05:19 AM

got a pic of the seat?

Luvlegs · 01-18-2008, 06:03 AM

Is the headliner parchment? Are there a couple extra holes in it?
Would you sell just the visor clips and headliner?

I need to research how/if the headliner would/could be installed in my truck (72 w/o headliner in it) - Is the trim required or expesive to replace? And lastly, do they "roll up" to ship or have to stay flat?

**uncle** · 01-18-2008, 06:36 AM

Luvlegs,I got a good look at the visors and they are shot,but the headliner is just dirty. I will sell just the headliner if you like.It is parchment and I don't think it will hurt to roll it up a little to ship. The trim is not salvageable. It's your call on the trim installation. Meathead,here's a few pics.

**88JRFAN** · 01-18-2008, 10:16 AM

I'd Like To Buy The Cargo Light, Inside And Exterior Plus The Hole In The Cab. Would Also Like To Buy The Center Of Dash With Radio Hole. Shipped To 67401. Thanks Daren

Luvlegs · 01-18-2008, 10:29 AM

uncle, I really would like the headliner, I am just trying to figure out how to get it installed and I guess the trim is optional? - I'm doing searchs now... Also are the sun visor clips good? My zip is 27253. As soon as I can get the headliner figured out, I will get right back to you. If someone beats me to it, stuff happens

**uncle** · 01-18-2008, 11:08 AM

88JRFAN pm sent and Luvlegs I'll look close at the clips tomorrow.

Luvlegs · 01-18-2008, 02:47 PM

I fell asleep at the computer! What the hey, I'll take it and the clips if they are good. Maybe get you to toss in part of the molding to see what i can make, do, or get.
Goin' to bed!

**uncle** · 01-19-2008, 06:46 AM

Luvlegs,headliner,visor clips,piece of headliner trim. $50 shipped.

RJGeister · 01-19-2008, 12:45 PM

Quote:

Originally Posted by RJGeister

Uncle,
Is that a rear slider in the cab? If so, what do you want for it? I will pick it up.

Thanks,
Rich

Uncle,
Any word on the rear window?

Rich

Luvlegs · 01-19-2008, 01:07 PM

pm sent

01-08-2008, 11:28 AM	#1
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	71 High Hump A/c Cab NOW PARTING!!!!!! It is a 72 big block,a/c,GMC 20 Sierra Grande cab as it sits now. Everything in pics is included. $750. Needs outer rockers,d/s floor patch, and patching on one cab corner. Also needs patching where someone cut out the kickpanels. Both doors have a few small pinholes where I showed the pic on the drivers door. It does have some small dents on the back of the cab also. Please respond to post. NOW PARTING!!!!!!!!!!!!!!! Attached Images Last edited by uncle; 01-13-2008 at 04:38 PM.

01-08-2008, 11:30 AM	#2
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab More pics. It has a White houndstooth seat and a good dashpad also. Attached Images

01-08-2008, 11:30 AM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab One more. Attached Images

01-08-2008, 12:26 PM	#4
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 71 High Hump A/c Cab if you decide to sell the tilt, please let me know. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

01-09-2008, 10:30 AM	#5
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab Bump.

01-10-2008, 03:51 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab One More Time!

01-13-2008, 04:36 PM	#7
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab All prices do NOT include shipping. Tilt $300,Doors bare $250 ( No shipping),Door panels,visors and headliner$125,floor hump $50,seat $50(No shipping),Dash pad $65, Bare cab $200 OBO, glove box lid and cluster $75. Please respond to post. Last edited by uncle; 01-13-2008 at 04:39 PM.

01-13-2008, 05:07 PM	#8
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 71 High Hump A/c Cab how are the door panels. is the grain still good and do they have any extra holes? __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

01-14-2008, 02:45 AM	#9
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab I'll get some pics this afternoon.

01-14-2008, 04:54 AM	#10
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 71 High Hump A/c Cab I will pass on the tilt, thanks anyways. ~doug __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

01-14-2008, 08:09 AM	#11
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: 71 High Hump A/c Cab Uncle, Is that a rear slider in the cab? If so, what do you want for it? I will pick it up. Thanks, Rich

01-14-2008, 11:51 AM	#12
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab Pics for 72 highlander. Panels do have scuffs on them. Tried to show in the pics. $40 for the rear slider and it's not a factory one. Attached Images

01-15-2008, 02:53 PM	#13
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: 71 High Hump A/c Cab thanks for the pics, mine are nice, one has a little wear and other has a few extra holes, but i'm looking for some primo ones, thanks though. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

01-15-2008, 02:57 PM	#14
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab If you can't find any,I've been told more than once that the green ones are the ones to dye.

01-18-2008, 05:08 AM	#15
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab Bump.



Register or Log In To remove these advertisements.

01-18-2008, 05:19 AM	#16
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 71 High Hump A/c Cab got a pic of the seat? __________________ 72 2wd blazer 72 swb 4x4

01-18-2008, 06:03 AM	#17
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 71 High Hump A/c Cab Is the headliner parchment? Are there a couple extra holes in it? Would you sell just the visor clips and headliner? I need to research how/if the headliner would/could be installed in my truck (72 w/o headliner in it) - Is the trim required or expesive to replace? And lastly, do they "roll up" to ship or have to stay flat? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

01-18-2008, 06:36 AM	#18
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab Luvlegs,I got a good look at the visors and they are shot,but the headliner is just dirty. I will sell just the headliner if you like.It is parchment and I don't think it will hurt to roll it up a little to ship. The trim is not salvageable. It's your call on the trim installation. Meathead,here's a few pics. Attached Images

01-18-2008, 10:16 AM	#19
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 71 High Hump A/c Cab I'd Like To Buy The Cargo Light, Inside And Exterior Plus The Hole In The Cab. Would Also Like To Buy The Center Of Dash With Radio Hole. Shipped To 67401. Thanks Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

01-18-2008, 10:29 AM	#20
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 71 High Hump A/c Cab uncle, I really would like the headliner, I am just trying to figure out how to get it installed and I guess the trim is optional? - I'm doing searchs now... Also are the sun visor clips good? My zip is 27253. As soon as I can get the headliner figured out, I will get right back to you. If someone beats me to it, stuff happens __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

01-18-2008, 11:08 AM	#21
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab 88JRFAN pm sent and Luvlegs I'll look close at the clips tomorrow.

01-18-2008, 02:47 PM	#22
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 71 High Hump A/c Cab I fell asleep at the computer! What the hey, I'll take it and the clips if they are good. Maybe get you to toss in part of the molding to see what i can make, do, or get. Goin' to bed! __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 01-18-2008 at 02:47 PM.

01-19-2008, 06:46 AM	#23
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,287	Re: 71 High Hump A/c Cab Luvlegs,headliner,visor clips,piece of headliner trim. $50 shipped.

01-19-2008, 01:07 PM	#25
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 71 High Hump A/c Cab pm sent __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

Register or Log In To remove these advertisements.