Parting out 1963 Chevy truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PrerunnerRob · 01-11-2008, 07:31 PM

I picked up a 1963 Chevy for the cab, doors, and frame section.
The rest is up for grabs, email me for a price.
Stepside bed-shortbed-complete w/tailgate, hardware, plywood floor, dents scratches on drivers fender from tire blowout.
Stepside chrome bumperw/ brackets-ok shape, not perfect
2 gas tanks
Windshield
Driveshaft
10 bolt rear axle from a 197? Nova, set up for trailing arms
Short bed trailing arms
4 Mag wheels with a bolt pattern that matches the rear end
Automatic crossmember
Brake booster/master cyl/prop valve for disc/drum
Tilt column from 197? Nova(I think)-Auto w/keys, missing shifter.
Small rear window
Windshield-small chip at eye level(where else?

) some imperfections, no cracks
Windshild wiper motor/linkage
LED stepside taillights
Various small parts
I'm not looking to make much on any of this stuff, I would rather have it go to someone who could use it instead of the scrap pile.
Email me at rjm_sadler@yahoo.com, or just PM me. I almost always check it daily. I'd prefer not to ship, unless it's small stuff.
Thanks,
Robert

gostranger · 01-12-2008, 01:34 AM

i didnt see them listed but are there any good fenders? let me know thanks

PrerunnerRob · 01-12-2008, 04:59 PM

Unfortunatly not, the front end is smashed in.

Stepside65 · 01-15-2008, 03:36 PM

How much for bumper and brackets? unfortunately would have to be shipped to 88330.
Thanks,

EyeH8the24 · 01-15-2008, 03:41 PM

intrested in the wheels...shipping to 36854..if they are 5 lug for trucks...thanks travis

PrerunnerRob · 01-16-2008, 09:38 AM

Quote:

Originally Posted by Stepside65

How much for bumper and brackets? unfortunately would have to be shipped to 88330.
Thanks,

Sold already

PrerunnerRob · 01-16-2008, 09:39 AM

Quote:

Originally Posted by EyeH8the24

intrested in the wheels...shipping to 36854..if they are 5 lug for trucks...thanks travis

5 lug chevy car pattern

502tripower · 01-16-2008, 06:35 PM

Quote:

Originally Posted by PrerunnerRob

5 lug chevy car pattern

Chevrolet passenger car would be 5 on 4-3/4". Light duty truck would be 5 on 5"

Bowtie001 · 01-17-2008, 05:05 AM

How is the steering wheel? Can I get a picture?

62 short step · 01-17-2008, 12:44 PM

How about the battery tray? Is it in good shape? Shipping & price to 70739. Thanks.

PrerunnerRob · 01-18-2008, 01:09 PM

Quote:

Originally Posted by Bowtie001

How is the steering wheel? Can I get a picture?

Steering wheel was destroyed in the front end wreck.

PrerunnerRob · 01-18-2008, 01:14 PM

Quote:

Originally Posted by 62 short step

How about the battery tray? Is it in good shape? Shipping & price to 70739. Thanks.

unfortunately, destroyed in the wreck. I might have another one though, I'll look tomorrow when I go to my shop.

62 short step · 01-18-2008, 08:52 PM

Cool. Thanks.

foedoeblaza · 01-22-2008, 02:36 PM

hows the dash?

PrerunnerRob · 01-24-2008, 02:48 PM

Quote:

Originally Posted by foedoeblaza

hows the dash?

Dash is cut for a radio, but good other then that. I'll go get some pictures, I swear!

foedoeblaza · 01-24-2008, 02:55 PM

Quote:

Originally Posted by PrerunnerRob

Dash is cut for a radio, but good other then that. I'll go get some pictures, I swear!

would like to see pics and price

Daniel 61 Apache · 01-29-2008, 05:34 AM

Any pics of the trailing arms? Need some that aren't rusted in half like mine are.

joe231 · 02-18-2008, 10:50 AM

do you have a Chevy headlight harness? or the plug that passes through the core support?

PrerunnerRob · 02-21-2008, 11:41 AM

Quote:

Originally Posted by Daniel 61 Apache

Any pics of the trailing arms? Need some that aren't rusted in half like mine are.

Trailing arms have been scrapped

PrerunnerRob · 02-21-2008, 11:42 AM

Quote:

Originally Posted by joe231

do you have a Chevy headlight harness? or the plug that passes through the core support?

I'm pretty sure mine is done for, but I'll look.

BUG1500 · 02-23-2008, 01:50 PM

what about the front crossmember?

sleazytiki · 03-06-2008, 02:25 AM

How about the rear fenders? Could you ship them to NJ (zip 08723)?

68c10owner · 03-12-2008, 02:08 AM

still got the complete bed?

66trkbldr · 03-13-2008, 09:10 AM

looking for 1 alum head light trim ring from 63,if you got one
\

68c10owner · 04-02-2008, 03:08 AM

still looking for a bed if you got one?

01-11-2008, 07:31 PM	#1
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Parting out 1963 Chevy truck I picked up a 1963 Chevy for the cab, doors, and frame section. The rest is up for grabs, email me for a price. Stepside bed-shortbed-complete w/tailgate, hardware, plywood floor, dents scratches on drivers fender from tire blowout. Stepside chrome bumperw/ brackets-ok shape, not perfect 2 gas tanks Windshield Driveshaft 10 bolt rear axle from a 197? Nova, set up for trailing arms Short bed trailing arms 4 Mag wheels with a bolt pattern that matches the rear end Automatic crossmember Brake booster/master cyl/prop valve for disc/drum Tilt column from 197? Nova(I think)-Auto w/keys, missing shifter. Small rear window Windshield-small chip at eye level(where else?) some imperfections, no cracks Windshild wiper motor/linkage LED stepside taillights Various small parts I'm not looking to make much on any of this stuff, I would rather have it go to someone who could use it instead of the scrap pile. Email me at rjm_sadler@yahoo.com, or just PM me. I almost always check it daily. I'd prefer not to ship, unless it's small stuff. Thanks, Robert

01-12-2008, 01:34 AM	#2
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: Parting out 1963 Chevy truck i didnt see them listed but are there any good fenders? let me know thanks

01-12-2008, 04:59 PM	#3
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: Parting out 1963 Chevy truck Unfortunatly not, the front end is smashed in.

01-15-2008, 03:36 PM	#4
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: Parting out 1963 Chevy truck How much for bumper and brackets? unfortunately would have to be shipped to 88330. Thanks, __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

01-15-2008, 03:41 PM	#5
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: Parting out 1963 Chevy truck intrested in the wheels...shipping to 36854..if they are 5 lug for trucks...thanks travis

01-17-2008, 05:05 AM	#9
Bowtie001 Project underway - finally. Join Date: Feb 2007 Location: Greenville, SC Posts: 493	Re: Parting out 1963 Chevy truck How is the steering wheel? Can I get a picture? __________________ 1972 GMC Pre-resto... awaiting allocated funding.

01-17-2008, 12:44 PM	#10
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Parting out 1963 Chevy truck How about the battery tray? Is it in good shape? Shipping & price to 70739. Thanks.

01-18-2008, 08:52 PM	#13
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Parting out 1963 Chevy truck Cool. Thanks.

01-22-2008, 02:36 PM	#14
foedoeblaza Registered User Join Date: Dec 2007 Location: Dallas TX Posts: 9	Re: Parting out 1963 Chevy truck hows the dash?

01-29-2008, 05:34 AM	#17
Daniel 61 Apache Registered User Join Date: May 2007 Location: Oceanside, CA Posts: 168	Re: Parting out 1963 Chevy truck Any pics of the trailing arms? Need some that aren't rusted in half like mine are.

02-18-2008, 10:50 AM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Parting out 1963 Chevy truck do you have a Chevy headlight harness? or the plug that passes through the core support? __________________ *CHEVY ONLY*

02-23-2008, 01:50 PM	#21
BUG1500 Registered User Join Date: Feb 2008 Location: DOWNEY, SO*CAL Posts: 22	Re: Parting out 1963 Chevy truck what about the front crossmember? __________________ 1960 CHEVY C10 1967 CHEVY C10

03-06-2008, 02:25 AM	#22
sleazytiki Registered User Join Date: Jan 2008 Location: Jersey Shore Posts: 18	Re: Parting out 1963 Chevy truck How about the rear fenders? Could you ship them to NJ (zip 08723)?

03-12-2008, 02:08 AM	#23
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,011	Re: Parting out 1963 Chevy truck still got the complete bed? __________________ Anthony

03-13-2008, 09:10 AM	#24
66trkbldr LIGHTMUP,BURNMDWN! Join Date: Sep 2007 Location: downers grove il Posts: 110	Re: Parting out 1963 Chevy truck looking for 1 alum head light trim ring from 63,if you got one \ __________________ 64 LWB Chevy " EL DEVILLE" 61 Caddy ambulance 56 Coupe deville 64 Coupe deville 29 Ford roadster



Register or Log In To remove these advertisements.

04-02-2008, 03:08 AM	#25
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,011	Re: Parting out 1963 Chevy truck still looking for a bed if you got one? __________________ Anthony

Register or Log In To remove these advertisements.