Project DEATH !!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spray-Bomb · 01-15-2008, 05:35 PM

Well guys N gals, this is my new 67 Chevy

I don't really know what my long term plans are, but for now Ima paint it off white /w scallops, prolly put my black 20's on it & then just some maintenance stuff

Also the bed is pretty toast & the front passenger side fender is bad too, so Ima try to get another bed & front fender before I paint it
Theres is a lil rust in the floor cuz it didn't get fixed when the PO fixed the rockers, so I'll fix that too
Plus the front end is pretty worn & the trans may be toast

This is it when I got it (sorry no new pics yet)

Spray-Bomb · 01-15-2008, 05:37 PM

Well today I put some of my 20's on the front of it & lowered the rear (I think the front has been dropped a bit already)
So me and my buddy are taking it for a quick spin after the wheels & drop, and we're put'n bout 10-20 mph top a hill & BOOM !!!! We see a wheel go by then a brake drum & sparks & then we stop, hop out he goes to find the wheel while I try to find the brake drum & lug nuts

So I call my dad & have him bring me a jack & a 4-way Rolling Eyes
Then I shove the brakes back in & the drum on, then throw the wheel back on & make sure the frick'n lug nuts are tight this time
And make sure the rest of them were tight around the rest of the truck

So now the truck has a name... DEATH !!!

Sorry but I didn't have my camera, so I didn't get any pics of the whole ordeal

Spray-Bomb · 01-15-2008, 05:55 PM

I still have to run the numbers on the engine, but I do know it's a SBC... lol

I may be getting a 700R4 for it, so that'll be nice... just hope the gears aren't to steep for the OD

Spray-Bomb · 09-14-2008, 11:57 PM

Well guys, its this trucks turn for some attention

My project Killer is taking longer than expected & I need something to drive now, so I will be doing some stuff to this truck to get it on the road & drive it

Nothing special for now

Today I pulled the bed off & replaced it with the bed off of Sinister

Spray-Bomb · 09-15-2008, 12:01 AM

Still have a fair amount to do to it, but it shouldnt take too long

I have to get wood & strips for the bed so I can bolt it down, I need to swap the seat out, the drivers side window regulator needs work, the starter grinds like all git out, I need to check the brakes to make sure they arent worn out, tune it up a lil, & I have to make sure the trans is ok

Plus make sure all the lights & stuff work to get it inspected

LuckyHenriksen · 09-15-2008, 12:19 AM

Sweet new truck man. I love the way you move stuff around with the track loader. Looks like they way we move stuff around at my house

Spray-Bomb · 09-15-2008, 12:48 AM

Thanks man

Yeah, its a pretty nice thing to have around, & it makes easy work out of moving all the trucks around

thirdstreettito · 09-15-2008, 10:48 AM

Looks like a good project!

67ChevyRedneck · 09-15-2008, 11:40 AM

At least you took the 4-wheeler out first!

You look like you have too much fun with these trucks! Keep up the good work.

Spray-Bomb · 09-15-2008, 07:46 PM

Theres such a thing as too much fun ???

72BlckButy · 09-15-2008, 10:07 PM

Quote:

Originally Posted by Spray-Bomb

Theres such a thing as too much fun ???

Never!

Spray-Bomb · 09-15-2008, 10:46 PM

Well I finally found out what brand the 20's are, now on to hunting down a dealer

thirdstreettito · 09-16-2008, 08:01 AM

Yeah I love those 20's. They look great too!

Spray-Bomb · 09-16-2008, 09:52 AM

Quote:

Originally Posted by thirdstreettito

Yeah I love those 20's. They look great too!

Yeah, unfortunately I only have 3 of them

thirdstreettito · 09-16-2008, 08:36 PM

Quote:

Originally Posted by Spray-Bomb

Yeah, unfortunately I only have 3 of them

Ah shucks!

Spray-Bomb · 09-18-2008, 10:40 PM

Update

Well I had a buddy send me some new starter parts & got them in yesterday, so I fixed the starter today & just have to put it on to see if it solved the problem

Got the exhaust mocked up, just need to trim the length a lil & weld it up

Also worked on the window some & hope that its fixed

01-15-2008, 05:35 PM	#1
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Project DEATH !!! Well guys N gals, this is my new 67 Chevy I don't really know what my long term plans are, but for now Ima paint it off white /w scallops, prolly put my black 20's on it & then just some maintenance stuff Also the bed is pretty toast & the front passenger side fender is bad too, so Ima try to get another bed & front fender before I paint it Theres is a lil rust in the floor cuz it didn't get fixed when the PO fixed the rockers, so I'll fix that too Plus the front end is pretty worn & the trans may be toast This is it when I got it (sorry no new pics yet) __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 09-14-2008 at 11:47 PM.

01-15-2008, 05:37 PM	#2
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! Well today I put some of my 20's on the front of it & lowered the rear (I think the front has been dropped a bit already) So me and my buddy are taking it for a quick spin after the wheels & drop, and we're put'n bout 10-20 mph top a hill & BOOM !!!! We see a wheel go by then a brake drum & sparks & then we stop, hop out he goes to find the wheel while I try to find the brake drum & lug nuts So I call my dad & have him bring me a jack & a 4-way Rolling Eyes Then I shove the brakes back in & the drum on, then throw the wheel back on & make sure the frick'n lug nuts are tight this time And make sure the rest of them were tight around the rest of the truck So now the truck has a name... DEATH !!! Sorry but I didn't have my camera, so I didn't get any pics of the whole ordeal __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 09-14-2008 at 11:48 PM.

01-15-2008, 05:55 PM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! I still have to run the numbers on the engine, but I do know it's a SBC... lol I may be getting a 700R4 for it, so that'll be nice... just hope the gears aren't to steep for the OD __________________ Just not low enough... ----------------------------- Sinister Killer

09-14-2008, 11:57 PM	#4
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! Well guys, its this trucks turn for some attention My project Killer is taking longer than expected & I need something to drive now, so I will be doing some stuff to this truck to get it on the road & drive it Nothing special for now Today I pulled the bed off & replaced it with the bed off of Sinister __________________ Just not low enough... ----------------------------- Sinister Killer

09-15-2008, 12:01 AM	#5
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! Still have a fair amount to do to it, but it shouldnt take too long I have to get wood & strips for the bed so I can bolt it down, I need to swap the seat out, the drivers side window regulator needs work, the starter grinds like all git out, I need to check the brakes to make sure they arent worn out, tune it up a lil, & I have to make sure the trans is ok Plus make sure all the lights & stuff work to get it inspected __________________ Just not low enough... ----------------------------- Sinister Killer

09-15-2008, 12:19 AM	#6
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Project DEATH !!! Sweet new truck man. I love the way you move stuff around with the track loader. Looks like they way we move stuff around at my house __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

09-15-2008, 12:48 AM	#7
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! Thanks man Yeah, its a pretty nice thing to have around, & it makes easy work out of moving all the trucks around __________________ Just not low enough... ----------------------------- Sinister Killer

09-15-2008, 10:48 AM	#8
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Project DEATH !!! Looks like a good project! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

09-15-2008, 11:40 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Project DEATH !!! At least you took the 4-wheeler out first! You look like you have too much fun with these trucks! Keep up the good work. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-15-2008, 07:46 PM	#10
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! Theres such a thing as too much fun ??? __________________ Just not low enough... ----------------------------- Sinister Killer

09-15-2008, 10:46 PM	#12
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! Well I finally found out what brand the 20's are, now on to hunting down a dealer __________________ Just not low enough... ----------------------------- Sinister Killer

09-16-2008, 08:01 AM	#13
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Project DEATH !!! Yeah I love those 20's. They look great too! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

09-18-2008, 10:40 PM	#16
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project DEATH !!! Update Well I had a buddy send me some new starter parts & got them in yesterday, so I fixed the starter today & just have to put it on to see if it solved the problem Got the exhaust mocked up, just need to trim the length a lil & weld it up Also worked on the window some & hope that its fixed __________________ Just not low enough... ----------------------------- Sinister Killer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.