Parts Truck WTW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camperman · 01-20-2008, 11:26 AM

I have this truck that I am considering moving down the road. It is a 3/4 ton 4x4 with a posi rear and 4 speed. The rear end, I have been told, is worth more because it is one that you can get at from the front and back of the pumpkin. The truck has its original drive train except for the carborator. The body is toast except for maybe the front fenders, hood, and inner fenders.

What is it worth as a full truck?

What is the rear end worth?

What is the drive line worth?

See pics

patrick

**special-K** · 01-20-2008, 11:52 AM

It`s prolly about $500 worth of stuff there.I`d just sell it whole.What year is it?

camperman · 01-20-2008, 12:01 PM

its an 1970

**too much stuff** · 01-20-2008, 12:57 PM

If you figure out a price, let me know. I'm not real far away. Eric

wibilly · 01-22-2008, 12:23 AM

i would be interested in the literature for the no spin Eric if you cet down there stop in i'm less than a mile off the beaten path right on your way

stonewall618 · 01-22-2008, 01:55 AM

are you parting it out?
because if u are i need the fan shroud

krazy_texan · 02-01-2008, 01:00 PM

i might be interested in the truck i am needing a 3/4 ton 4x4 frame

camperman · 02-01-2008, 01:27 PM

I would consider parting it out however I do not have a lot of time nor do I have a place to begin taking it apart at this time. I would prefer to sell it whole, but parting it is possible, but not till summer.

stonewall618 · 02-01-2008, 01:36 PM

thats fine...if you do decide to let me know...i need a fan shroud BADLY

GMC Jim · 02-01-2008, 08:51 PM

not sure, but the pic shows that the fan shroud has a chunk torn out of it ???

camperman · 02-01-2008, 09:42 PM

I'm not sure either. I would have to look at it some time to confirm. It is on our back 40 so wont get to it today. I have another truck 2 wheel drive truck that has shroud also. Pretty sure that one is fine. Is there a difference between 2 wheel and 4 wheel trucks with that part?

stonewall618 · 02-01-2008, 09:53 PM

i dont care if there is a chunk out of that one...it will still do the job of funneling the air to the radaiortor and engine...so ya... if you know some one that has one i want to get one before it starts to get hot again...

Blue_71 · 02-02-2008, 10:10 AM

2wd ones are narrower front to back-- 4x4 engines sit back further

01-20-2008, 11:26 AM	#1
camperman Registered User Join Date: Nov 2007 Location: rice lake, wi Posts: 25	Parts Truck WTW I have this truck that I am considering moving down the road. It is a 3/4 ton 4x4 with a posi rear and 4 speed. The rear end, I have been told, is worth more because it is one that you can get at from the front and back of the pumpkin. The truck has its original drive train except for the carborator. The body is toast except for maybe the front fenders, hood, and inner fenders. What is it worth as a full truck? What is the rear end worth? What is the drive line worth? See pics patrick Attached Images

01-20-2008, 11:52 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Parts Truck WTW It`s prolly about $500 worth of stuff there.I`d just sell it whole.What year is it? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-20-2008 at 11:52 AM.

01-20-2008, 12:01 PM	#3
camperman Registered User Join Date: Nov 2007 Location: rice lake, wi Posts: 25	Re: Parts Truck WTW its an 1970

01-20-2008, 12:57 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parts Truck WTW If you figure out a price, let me know. I'm not real far away. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2008, 12:23 AM	#5
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Parts Truck WTW i would be interested in the literature for the no spin Eric if you cet down there stop in i'm less than a mile off the beaten path right on your way __________________ common sense isn't so common anymore Last edited by wibilly; 01-22-2008 at 12:27 AM.

01-22-2008, 01:55 AM	#6
stonewall618 Just loves his truck. Join Date: Jan 2008 Location: cleburne, TX Posts: 263	Re: Parts Truck WTW are you parting it out? because if u are i need the fan shroud __________________ Gold 1969 c10 LWB--350 gm crate motor 30"muds on the back...with aluminum rims with black and red Chevy bowtie center caps that look awesome! EAGLE SCOUT FTW!!!

02-01-2008, 01:00 PM	#7
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	Re: Parts Truck WTW i might be interested in the truck i am needing a 3/4 ton 4x4 frame __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

02-01-2008, 01:27 PM	#8
camperman Registered User Join Date: Nov 2007 Location: rice lake, wi Posts: 25	Re: Parts Truck WTW I would consider parting it out however I do not have a lot of time nor do I have a place to begin taking it apart at this time. I would prefer to sell it whole, but parting it is possible, but not till summer.

02-01-2008, 01:36 PM	#9
stonewall618 Just loves his truck. Join Date: Jan 2008 Location: cleburne, TX Posts: 263	Re: Parts Truck WTW thats fine...if you do decide to let me know...i need a fan shroud BADLY __________________ Gold 1969 c10 LWB--350 gm crate motor 30"muds on the back...with aluminum rims with black and red Chevy bowtie center caps that look awesome! EAGLE SCOUT FTW!!!

02-01-2008, 08:51 PM	#10
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	Re: Parts Truck WTW not sure, but the pic shows that the fan shroud has a chunk torn out of it ??? __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

02-01-2008, 09:42 PM	#11
camperman Registered User Join Date: Nov 2007 Location: rice lake, wi Posts: 25	Re: Parts Truck WTW I'm not sure either. I would have to look at it some time to confirm. It is on our back 40 so wont get to it today. I have another truck 2 wheel drive truck that has shroud also. Pretty sure that one is fine. Is there a difference between 2 wheel and 4 wheel trucks with that part?

02-01-2008, 09:53 PM	#12
stonewall618 Just loves his truck. Join Date: Jan 2008 Location: cleburne, TX Posts: 263	Re: Parts Truck WTW i dont care if there is a chunk out of that one...it will still do the job of funneling the air to the radaiortor and engine...so ya... if you know some one that has one i want to get one before it starts to get hot again... __________________ Gold 1969 c10 LWB--350 gm crate motor 30"muds on the back...with aluminum rims with black and red Chevy bowtie center caps that look awesome! EAGLE SCOUT FTW!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.