|
01-30-2008, 01:38 AM
|
#1 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
my project (84 gmc)
Im building up my 84 GMC truck, as of right now the engines being built. It is a smallblock Chevy 436in with Eagle 4'' forged crank, Eagle 6'' H rods, Je pistons dome 4.165'', custom ground cam, Brodix heads w/2.08 intake and Brodix single plane highrise intake both port and polished to match each other, also a 1050cfm carb. The trans will be a built up th400 and the rearend will be a 10bolt with Auburn chunk and Richmond 4:10 gear ratio.
As soon as i can i will post picks of the build. I have a pic of the truck and once i get back home hopefully i will have the pics of the engine getting built.
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST   rules 
Last edited by GWEE; 01-30-2008 at 01:41 AM. |
|
|
|
01-30-2008, 02:37 AM
|
#2 |
|
Registered User
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
|
Re: my project (84 gmc)
Sounds like it's going to fly
|
|
|
|
|
01-30-2008, 03:55 AM
|
#3 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
My engine builder said it shuld be in the mid 12s. All it will have is close to 550+ hp and over 500ft/torque. Then later im thinking of getting a 84 s-15 and put it there. But thats still in the air.
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
|
01-30-2008, 05:53 AM
|
#4 |
|
Hay Team!!
 
Join Date: Jun 2003
Location: Ft. Worth, TX, USA
Posts: 366
|
Re: my project (84 gmc)
Nice project...!!
__________________
1972 Chevrolet Cheyenne LWB "Orange and White" 8) |
|
|
|
|
01-30-2008, 06:22 AM
|
#5 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
thanks its been a long time comming. as soon as the engine is built we going t bring it to have it dyno then im going to put it in my truck.
thats still a long way off
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
|
01-30-2008, 07:16 AM
|
#6 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: my project (84 gmc)
Keep the full size! It won't be as fast but 10x cooler!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 01-30-2008 at 11:34 PM. |
|
|
|
|
01-30-2008, 10:52 PM
|
#7 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
thats a good idea also
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
|
01-31-2008, 03:36 PM
|
#8 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
does anyone know how much a Dart Little M block is.
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
|
01-31-2008, 04:07 PM
|
#9 |
|
Registered User
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
|
Re: my project (84 gmc)
With 550hp (at the crank) and 500ftlbs, I think it will go faster than mid 12's with the right set up.
With my converter locked, mine made 410rwhp/366ftlbs and unlocked (which yours will be) 386rwhp/366ftlbs. At 3,840 lbs with me in it, I went 12.33 @ 110mph. I can't imagine you having a 164hp/134tq loss through the drive train. |
|
|
|
|
01-31-2008, 06:09 PM
|
#10 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
if i get the dart block which i might do. if i do get it i will have lot more hp
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
|
01-31-2008, 09:45 PM
|
#11 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: my project (84 gmc)
call Jimmy Crenshaw in south Alabama I here he gets real good prices on dart stuff. 251-302-0100
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 01-31-2008 at 09:53 PM. |
|
|
|
|
01-31-2008, 09:48 PM
|
#12 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
will do thanks
if i get the Dart block i will get a bigger cam and add a 250 shot fogger system.
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
Last edited by GWEE; 01-31-2008 at 09:50 PM. |
|
|
|
|
02-01-2008, 02:59 AM
|
#13 | |
|
Hay Team!!
Join Date: Jun 2003
Location: Ft. Worth, TX, USA
Posts: 366
|
Re: my project (84 gmc)
Quote:
After shipping...around $1,900....anything less is a good deal. If I had it to do all over again, I would try to find a good used one or even a bowtie block from racingjunk. The casting is pretty thick so they rarely crack, unlike factory blocks.
__________________
1972 Chevrolet Cheyenne LWB "Orange and White" 8) |
|
|
|
|
|
02-01-2008, 03:06 PM
|
#14 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
when i get home from work next week i will be getting a dart block.
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
|
02-01-2008, 09:22 PM
|
#15 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: my project (84 gmc)
Let me know if Jimmy saves you any money. I need to buy a big block one myself!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
02-02-2008, 12:50 AM
|
#16 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
the guy thats building my engine said he ould beable to get my block for me.
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
|
02-24-2008, 03:13 AM
|
#17 |
|
Registered User
Join Date: Jan 2007
Location: LOUISIANA
Posts: 151
|
Re: my project (84 gmc)
k theres been many changes and im sure there be many more. my engine builder just ordered my block, it will be a world product block. the reason he sayed was cuz it will need less machine work on the block for the 4.00' crank plus it was cheaper. its takeing a long time(money issue) but im sure i will love it once its finish.
__________________
1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
