Progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 short step · 02-14-2008, 09:40 AM

As some of you know I had to replace the frame on my 61 4x4 because it was bent. Here are a few progress pics.

62 short step · 02-14-2008, 09:43 AM

More pics. Last one is how she sits now. Waiting on new fender and grille support so I can get the truck in primer.

protrash64 · 02-14-2008, 10:14 AM

Looks very nice........dont you wish that paint stayed that way?

What did you use on your frame?

283 Man · 02-14-2008, 10:20 AM

Looking good!!! Cant wait see the 61 chevy agian and go for another ride in June.

62 short step · 02-14-2008, 10:34 AM

Quote:

Originally Posted by protrash64

Looks very nice........dont you wish that paint stayed that way?

What did you use on your frame?

Yea it would be nice if paint stayed nice and new looking. I used rustoleum hammered it did a nice job. Probably not as good as por-15, but its got to be better than what came stock on the frame.

62 short step · 02-14-2008, 10:35 AM

Quote:

Originally Posted by 283 Man

Looking good!!! Cant wait see the 61 chevy agian and go for another ride in June.

Thanks Morton! It should be ready for a test run for you!!

nhtc33d · 02-14-2008, 11:06 AM

Thats a great looking truck! I can't wait to see it completed.
I think it sits at the perfect height. what color are you going to paint it?

kris's66lwb · 02-14-2008, 11:22 AM

very very nice i glad to see it together agian

62 short step · 02-14-2008, 11:46 AM

Quote:

Originally Posted by nhtc33d

Thats a great looking truck! I can't wait to see it completed.
I think it sits at the perfect height. what color are you going to paint it?

Thanks! Still not to sure about the color yet.

62 short step · 02-14-2008, 11:46 AM

Quote:

Originally Posted by kris's66lwb

very very nice i glad to see it together agian

Yea, me too!!!

Dinos63 · 02-14-2008, 12:07 PM

nice work on the chassic

joe231 · 02-14-2008, 12:29 PM

Looking good!!
Quite a lot of progress!

Slmd92DIME · 02-14-2008, 12:38 PM

Good work... Looks really good

62 short step · 02-14-2008, 12:39 PM

Thanks for the comments! They keep me going!!

mcmullinauctions · 02-14-2008, 02:10 PM

Are the 4x4 frame rails the same as a 2wd or are they different. I know the suspension is leaf instead of independent. I would like to make my '63 2wd a 4x4 but the only 4x4 frame I can find cheap has rusty rails. I would like to make it look as factory as possible. Can you help me at all?
Thanks
Kevin

*LILRED66* · 02-14-2008, 07:41 PM

Kevin:

I sent you a PM regarding a factory 4x4 K10 rolling chassis & factory running gear in Kansas City, KS.

**ChiefRocka** · 02-14-2008, 10:53 PM

Quote:

Originally Posted by 62 short step

Thanks for the comments! They keep me going!!

Your frame came out really nice...looking good man...I really like your truck...You sure know what you are doing....The engine looks awesome as well....Perfect size tires too....Nice place you got there.....

Ok...that should keep you going for a while !!!!

Seriously...It looks great !!!

jchav62 · 02-15-2008, 12:30 AM

Looking awesome!! The chassis looks great. Keep the pics coming!

62 short step · 02-15-2008, 02:40 AM

Quote:

Originally Posted by ChiefRocka

Your frame came out really nice...looking good man...I really like your truck...You sure know what you are doing....The engine looks awesome as well....Perfect size tires too....Nice place you got there.....

Ok...that should keep you going for a while !!!!

Seriously...It looks great !!!

Now thats some encouragment !!!

Thanks John!!

ryan913 · 02-15-2008, 04:35 AM

Looking great! I had a 66 4 wheel drive and the chassis burned up in a barn fire. Still have the cab and frontend and title unburned! lol

72BlckButy · 02-15-2008, 04:44 AM

Lookin' good!

*LILRED66* · 02-15-2008, 09:33 AM

62 short step:

Your post inspired me to start another post of the progress on a '66 Chevy K10 lwb fleetside, I am doing for a fellow stovebolter.

Very nice work on your rig. It looks like you are taking your time and doing a very nice build. Should be a excellent rig when you are done. Don't forget to share photos, so we can all lick our chops, drooling over it.

Keep up the good work.

protrash64 · 02-15-2008, 09:51 AM

........Ive used the hammertone paint also and its really tough stuff. Not like standard rattle crap. I see it better in the pic w/ the engine. I used it on my headlite buckets, rear end cover. and some brackets for seats. When some parts didnt want cooperate I was a little rough on them and the paint hung in there.

62 short step · 02-15-2008, 10:22 AM

Quote:

Originally Posted by ryan913

Looking great! I had a 66 4 wheel drive and the chassis burned up in a barn fire. Still have the cab and frontend and title unburned! lol

Man that sucks!! Glad you saved something!!

62 short step · 02-15-2008, 10:24 AM

Quote:

Originally Posted by LILRED66

62 short step:

Your post inspired me to start another post of the progress on a '66 Chevy K10 lwb fleetside, I am doing for a fellow stovebolter.

Very nice work on your rig. It looks like you are taking your time and doing a very nice build. Should be a excellent rig when you are done. Don't forget to share photos, so we can all lick our chops, drooling over it.

Keep up the good work.

Thanks Tony! You have some fine trucks!! I really like your black 4x4. Jeremy.

02-14-2008, 09:40 AM	#1
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Progress As some of you know I had to replace the frame on my 61 4x4 because it was bent. Here are a few progress pics. Attached Images

02-14-2008, 09:43 AM	#2
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress More pics. Last one is how she sits now. Waiting on new fender and grille support so I can get the truck in primer. Attached Images

02-14-2008, 10:14 AM	#3
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Progress Looks very nice........dont you wish that paint stayed that way? What did you use on your frame? __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-14-2008, 10:20 AM	#4
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Progress Looking good!!! Cant wait see the 61 chevy agian and go for another ride in June.

02-14-2008, 11:06 AM	#7
nhtc33d Registered User Join Date: Dec 2007 Location: PA Posts: 326	Re: Progress Thats a great looking truck! I can't wait to see it completed. I think it sits at the perfect height. what color are you going to paint it?

02-14-2008, 11:22 AM	#8
kris's66lwb resident wrencher Join Date: Dec 2006 Location: ramona california Posts: 720	Re: Progress very very nice i glad to see it together agian

02-14-2008, 12:07 PM	#11
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Progress nice work on the chassic __________________ CHEVY ONLY... Nothin Else !

02-14-2008, 12:29 PM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Progress Looking good!! Quite a lot of progress!

02-14-2008, 12:38 PM	#13
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Progress Good work... Looks really good __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=269019 Petitioning No Regrets MD/WV

02-14-2008, 12:39 PM	#14
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress Thanks for the comments! They keep me going!!

02-14-2008, 02:10 PM	#15
mcmullinauctions McMullin Join Date: Jul 2007 Location: Missouri Posts: 129	Re: Progress Are the 4x4 frame rails the same as a 2wd or are they different. I know the suspension is leaf instead of independent. I would like to make my '63 2wd a 4x4 but the only 4x4 frame I can find cheap has rusty rails. I would like to make it look as factory as possible. Can you help me at all? Thanks Kevin

02-14-2008, 07:41 PM	#16
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Progress Kevin: I sent you a PM regarding a factory 4x4 K10 rolling chassis & factory running gear in Kansas City, KS.

02-15-2008, 12:30 AM	#18
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Progress Looking awesome!! The chassis looks great. Keep the pics coming! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-15-2008, 04:35 AM	#20
ryan913 Registered User Join Date: Jan 2008 Location: kenton, oh Posts: 183	Re: Progress Looking great! I had a 66 4 wheel drive and the chassis burned up in a barn fire. Still have the cab and frontend and title unburned! lol Last edited by ryan913; 02-15-2008 at 04:35 AM.

02-15-2008, 04:44 AM	#21
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Progress Lookin' good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)



Register or Log In To remove these advertisements.

02-15-2008, 09:33 AM	#22
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Progress 62 short step: Your post inspired me to start another post of the progress on a '66 Chevy K10 lwb fleetside, I am doing for a fellow stovebolter. Very nice work on your rig. It looks like you are taking your time and doing a very nice build. Should be a excellent rig when you are done. Don't forget to share photos, so we can all lick our chops, drooling over it. Keep up the good work.

02-15-2008, 09:51 AM	#23
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Progress ........Ive used the hammertone paint also and its really tough stuff. Not like standard rattle crap. I see it better in the pic w/ the engine. I used it on my headlite buckets, rear end cover. and some brackets for seats. When some parts didnt want cooperate I was a little rough on them and the paint hung in there. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

Register or Log In To remove these advertisements.