Project Retrospect - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blaz-air · 02-23-2008, 02:41 AM

I just finished this project up for Pacific Coast Customs and their client. There is some MASSIVE work going on here. hardtop style doors, unibody, wedge section, moved body lines, rearched wheel wheels, HUGE wheels, ect. ect. ect. Enjoy.

later

Carter

shifty · 02-23-2008, 02:44 AM

If they're running drums in the rear, what are they doing for e-Brake cables?

Blaz-air · 02-23-2008, 02:48 AM

They are covers over the disk I believe....

http://www.est1946.com/index.asp?Pag...ROD&ProdID=957

ChevLoRay · 02-23-2008, 03:00 AM

Sir, you have created another masterpiece of automotive artwork. My opinion is that Chip needs to move over to the same side as Boyd, and let you take charge.

Blaz-air · 02-23-2008, 03:03 AM

Man, Chip is the MAN!!! I am just a hack! But thanks again for the compliment. I wish people could have as much fun as I do when I am doing these!

Carter

Mint68 · 02-23-2008, 03:45 AM

Looks great, but how do you get the hood open?

Scott Webster · 02-23-2008, 04:34 AM

I dig the unibody. Actually I was going to start a thread asking if anyone had done that since it was a mod I was thinking about.

jb4short · 02-23-2008, 04:50 AM

Chris Bangle eat your heart out

67ChevyRedneck · 02-23-2008, 04:56 AM

Quote:

Originally Posted by Mint68

Looks great, but how do you get the hood open?

I was wondering the same thing. It looks like the hood/cowl/fenders are one piece, I think the whole thing flips forward.

That truck looks KILLER!!!!!!

It truely is a piece of art. That's one truck I'd actually be afraid to drive!

Blaz-air · 02-23-2008, 05:24 AM

its hard to see, but if you look at the cowl in the corner you will see the hood break. I runs along the top edge of the "old" hood.

**N2TRUX** · 02-23-2008, 06:05 AM

This might give you a concept of what Carter is talking about.

paintpyro · 02-23-2008, 06:08 AM

Carter,
She's beautiful!!

72BlckButy · 02-23-2008, 07:15 AM

Man oh man... what a sick looking truck! Any idea on when they're planning on having this truck done?

**SactoJim** · 02-23-2008, 07:52 AM

Beautiful rendering!

bowtieboy93 · 02-23-2008, 07:54 AM

this is gonna be CrAzY!

QKENUF4U · 02-23-2008, 10:18 AM

AWESOME !!! and chip f. is the ONLY guy i would ever let touch a vehicle of mine. PIMP MY RIDE does to much gay stuff to the vehicles

**Yukon Jack** · 02-23-2008, 09:35 PM

Wicked rendering!

02-23-2008, 02:41 AM	#1
Blaz-air Digital Dude Join Date: Jun 2000 Location: St. Louis Posts: 610	Project Retrospect I just finished this project up for Pacific Coast Customs and their client. There is some MASSIVE work going on here. hardtop style doors, unibody, wedge section, moved body lines, rearched wheel wheels, HUGE wheels, ect. ect. ect. Enjoy. later Carter __________________ Carter Hickman www.hokdigitalpaintbooth.com carterhickmandesigns.com

02-23-2008, 02:44 AM	#2
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Project Retrospect If they're running drums in the rear, what are they doing for e-Brake cables? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

02-23-2008, 02:48 AM	#3
Blaz-air Digital Dude Join Date: Jun 2000 Location: St. Louis Posts: 610	Re: Project Retrospect They are covers over the disk I believe.... http://www.est1946.com/index.asp?Pag...ROD&ProdID=957 __________________ Carter Hickman www.hokdigitalpaintbooth.com carterhickmandesigns.com

02-23-2008, 03:00 AM	#4
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Project Retrospect Sir, you have created another masterpiece of automotive artwork. My opinion is that Chip needs to move over to the same side as Boyd, and let you take charge. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-23-2008, 03:03 AM	#5
Blaz-air Digital Dude Join Date: Jun 2000 Location: St. Louis Posts: 610	Re: Project Retrospect Man, Chip is the MAN!!! I am just a hack! But thanks again for the compliment. I wish people could have as much fun as I do when I am doing these! Carter __________________ Carter Hickman www.hokdigitalpaintbooth.com carterhickmandesigns.com

02-23-2008, 03:45 AM	#6
Mint68 Registered User Join Date: Nov 2004 Location: Nebraska Posts: 762	Re: Project Retrospect Looks great, but how do you get the hood open?

02-23-2008, 04:34 AM	#7
Scott Webster Sheetmetal Psycho Join Date: May 2005 Location: athens PA Posts: 515	Re: Project Retrospect I dig the unibody. Actually I was going to start a thread asking if anyone had done that since it was a mod I was thinking about. __________________ I didn't say you were stupid, but I was thinking it... I need a check up from the neck up! Project "Rigginstine's Monster" 1971 C-10 longbed 355/4spd Future mods: 67 front clip Webby's Rigginations - where everything has potential!

02-23-2008, 04:50 AM	#8
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Project Retrospect Chris Bangle eat your heart out

02-23-2008, 05:24 AM	#10
Blaz-air Digital Dude Join Date: Jun 2000 Location: St. Louis Posts: 610	Re: Project Retrospect its hard to see, but if you look at the cowl in the corner you will see the hood break. I runs along the top edge of the "old" hood. __________________ Carter Hickman www.hokdigitalpaintbooth.com carterhickmandesigns.com

02-23-2008, 06:05 AM	#11
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Project Retrospect This might give you a concept of what Carter is talking about. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-23-2008, 06:08 AM	#12
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Re: Project Retrospect Carter, She's beautiful!! __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

02-23-2008, 07:15 AM	#13
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project Retrospect Man oh man... what a sick looking truck! Any idea on when they're planning on having this truck done? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-23-2008, 07:52 AM	#14
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Project Retrospect Beautiful rendering! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

02-23-2008, 07:54 AM	#15
bowtieboy93 Registered User Join Date: Feb 2007 Location: (Cloverdale) Surrey BC Canada Posts: 1,566	Re: Project Retrospect this is gonna be CrAzY! __________________ Travis travis_moffatt@hotmail.com 1969 Chevrolet C-10 LWB, 350c.i., TH350, In Pieces. 1991 GMC Sonoma, IROCS s10 grill 1963 Ford Galaxie 351/C4

02-23-2008, 10:18 AM	#16
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: Project Retrospect AWESOME !!! and chip f. is the ONLY guy i would ever let touch a vehicle of mine. PIMP MY RIDE does to much gay stuff to the vehicles Last edited by QKENUF4U; 02-23-2008 at 10:18 AM.



Register or Log In To remove these advertisements.

02-23-2008, 09:35 PM	#17
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Project Retrospect Wicked rendering! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

Register or Log In To remove these advertisements.