New here. Kinda long - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wolfinthesnow · 02-23-2008, 09:16 AM

Hey guys, first off, great forum ya get here. Looking foreward to hangin with yall. Got the disease in high school with a 63 chevy short bed. Went to ala. to get it, brought it back home in Fl. Got it running, drove it all through high school, graduated, got a better job, started racing it. Blew it up. My pops sold it to our buddy. Over the course of about 2 years hes got it looking sharp. (will try to upload pics later, computer has resorted to anarchy). Anyhow, he would sell it to me for $5500, no engine, no tranny. I didnt have it. Was telling the guys at work about it and one of our road mechanics told me he had one similar to it. Found out it was a 64 gmc. Asked about him selling it. He said "if you get it this weekend you can have it, i want it out of my yard." Needless to say, i got it. Its completely disassembled now, otherwise id show a pic, guess i still could reguardless. Like i said, will try later.

I do have a question though. Do yall know of any links or pics i can look at to see how to chop it? looking to go about 3". Still undecided. Any help would be greatly appreciated.,

Thanks

*LILRED66* · 02-23-2008, 10:04 AM

Welcome aboard...great story, until I read the part about chopping it. Cool today, but maybe not in a few years. I hope you keep the factory body lines. In any case, good luck with your project and post pictures early and often.

72BlckButy · 02-23-2008, 10:31 AM

to the board from Mid-MO!!!

BigDaddyDave · 02-23-2008, 10:35 AM

Welcome to the board from NC.

greg64 · 02-23-2008, 10:51 AM

Welcome from BC! Everybody's got an opinion, but I'm with Tony on the top choppin. To me, chopped trucks (especially long boxes) look like they've had an encounter with a crusher.

I guess if you're going to have it drag on the ground, then the chopped top might be in character. But, that's not my liking. As soon as lowering moves the center of the wheel above the center of the fender opening, it has gone too far.

Besides, I like my headroom!

**slepysal** · 02-23-2008, 12:54 PM

welcome from NOR CAL. Hey its your truck, but I agree choped longbeds look a bit strange.

hewlett2002000 · 02-23-2008, 12:58 PM

welcome from texas!!! ya know i personally dont like the chopped look, or the lowered look. i go more for a lift kit and knobby tires!! then again im a country boy so that might have something to do with it... lol hey, i just got an idea!! everybody lowers there trucks and chops there roof but ive never seen anybody put a lift kit AND lift there roof. you know the opposite of a chop? lol
good luck with the truck!!
John

*LILRED66* · 02-23-2008, 02:02 PM

Factory body lines, stance and equipment are ageless.

Iron-Butt · 02-23-2008, 05:12 PM

Welcome from Texas.

ryan913 · 02-23-2008, 05:52 PM

Welcome from north western Ohio. I also agree with keeping the factory body lines and not chopping the top. Enjoy your build!

Wolfinthesnow · 02-23-2008, 05:57 PM

Well, like i said, am still unsure if i want to try to do the chop. Didnt think about how it will look 5-10 yrs down the road. Guess its easier to leave her alone for now. Thanks for the input, perhaps it will keep me from messing up a good thing.. I think the pics of my old 63 are here. Still learnin the board ya know.

Wolfinthesnow · 02-23-2008, 06:05 PM

One more try on the 63 pics

Wolfinthesnow · 02-23-2008, 06:18 PM

Heres a pic of the 64 gmc. Not to rub it in but the only rot on this truck is about the size of a mans hand in each floor pan, everything else is good. And all it cost me was fuel to go fetch it. Sorry bout the pic quality, was taken by camera phone.

65stepside · 02-23-2008, 07:02 PM

Hey, I'll give a shout out to choppin'

I have a 1960 with 3" chopped. I didn't do it, so I couldn't tell ya how to chop, but I think the chopped look goes well as long as its lowered.

I like the pics of your 63!!!

*LILRED66* · 02-23-2008, 08:02 PM

Wolfinthesnow:

That is a fine looking rig...I hope you keep it factory. It will stand out more since it is not chopped or lowered, more so than if it was like everyone else's truck. The craze right now is to see how low you can go, but that will fade with time, like everything else.

Welcome aboard from Kansas City, KS.

badriand · 02-23-2008, 08:45 PM

Good looking truck, if you still got an itch to chop sure there are several people on here that would trade you another truck to chop. That one look in to good of shape. Wish i had that bed, mine is going to take a while to sort out.

**Chevy Fleetside** · 02-23-2008, 08:58 PM

I think that is a great truck for free. I would have jumped on it.
Sorry to do this, but seeing you didn't have to pay for the truck maybe the cash was to go somewhere else like here for instance http://main.diabetes.org/site/TR?pg=...065&px=4036316 I know i'm bad but i'm trying to help a good cause.

502tripower · 02-24-2008, 02:47 AM

Quote:

Originally Posted by LILRED66

Factory body lines, stance and equipment are ageless.

How true....But don't you think this looks better and no one can say this will fade...because it has been the look for 40 plus years on these trucks...

Just ad a set of wheels lower and voila...

notice it still has retained the 6-lug wheels...

badriand · 02-24-2008, 03:16 AM

I have a little bit of lilred66 and 502trippower in me. I like to keep as original as possible on the body but i have got to lower one also. I think about all older trucks look good with some lower stance (that is if they are 2 wheel drive). However some look great at stock also, but i always seem to get the terd looking ones so i lower to make the terd look better.

oldblu65 · 02-24-2008, 07:58 AM

Welcome from the great state of Tennessee !

kris's66lwb · 02-24-2008, 08:11 AM

my k20 i have its lifted and some guy at the gas station asked me if i choped the top

Frizzle Fry · 02-24-2008, 10:17 AM

Quote:

Originally Posted by LILRED66

The craze right now is to see how low you can go, but that will fade with time, like everything else.

I agree on the how low can you go trend. Guys have been lowering automobiles since about the day after they were invented. But it was to improve handling or make the look more the the racer of the day. Laying rocker does not scream high performance to me and will probably pass by as a trend. Lowering, on the other hand, is here to stay.

**ChiefRocka** · 02-24-2008, 07:43 PM

Welcome bro....Nor Cal here too.

That '63 you had was nice.....the 64 you got looks great as well.

I would do what YOU think is right....either way everyone here will help you out.

My opinion would be to leave the roof stock.

Good Luck !!

salazar44 · 02-24-2008, 08:59 PM

couldnt find the "beating the dead horse" pic... but i dont think lowering will fade. I dont consider it a trend.

Anyway, I agree with chief that if YOU think it looks good then go for it. As long as you dont add a a wood spoiler and ground effects.

And I also want to add that you handled peoples opinions very well. Sometimes people get offended. With that being said.. I vote to leave it unchopped.

ClassicAutoResto · 02-24-2008, 09:12 PM

The key to the customs is doing it RIGHT! To each his own on what looks good or great....but if it is done half a---d it never looks good. If you decide to chop, take your time and get help or advice from those who have done it before. There have been some trucks on here before hacked and chopped that in all honesty were done wrong and look terrible. The owner may think it looks good, but sorry they don't. Funny part is from a distance pic they look good, then they threw in the close-up and ooooh.........Take your time, do it right! Jerry

02-23-2008, 09:16 AM	#1
Wolfinthesnow I put the laughter n slaughter Join Date: Feb 2008 Location: Plant City, Fl Posts: 172	New here. Kinda long Hey guys, first off, great forum ya get here. Looking foreward to hangin with yall. Got the disease in high school with a 63 chevy short bed. Went to ala. to get it, brought it back home in Fl. Got it running, drove it all through high school, graduated, got a better job, started racing it. Blew it up. My pops sold it to our buddy. Over the course of about 2 years hes got it looking sharp. (will try to upload pics later, computer has resorted to anarchy). Anyhow, he would sell it to me for $5500, no engine, no tranny. I didnt have it. Was telling the guys at work about it and one of our road mechanics told me he had one similar to it. Found out it was a 64 gmc. Asked about him selling it. He said "if you get it this weekend you can have it, i want it out of my yard." Needless to say, i got it. Its completely disassembled now, otherwise id show a pic, guess i still could reguardless. Like i said, will try later. I do have a question though. Do yall know of any links or pics i can look at to see how to chop it? looking to go about 3". Still undecided. Any help would be greatly appreciated., Thanks

02-23-2008, 10:04 AM	#2
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: New here. Kinda long Welcome aboard...great story, until I read the part about chopping it. Cool today, but maybe not in a few years. I hope you keep the factory body lines. In any case, good luck with your project and post pictures early and often.

02-23-2008, 10:31 AM	#3
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: New here. Kinda long to the board from Mid-MO!!! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-23-2008, 10:35 AM	#4
BigDaddyDave RIP BigDaddyDave ~7-23-09~ You will be missed~ Join Date: Aug 2007 Location: Concord NC Posts: 1,361	Re: New here. Kinda long Welcome to the board from NC. __________________ BigDaddyDave's Truck: http://www.flickr.com/photos/daves71chevy/ \| See it in Action!

02-23-2008, 10:51 AM	#5
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: New here. Kinda long Welcome from BC! Everybody's got an opinion, but I'm with Tony on the top choppin. To me, chopped trucks (especially long boxes) look like they've had an encounter with a crusher. I guess if you're going to have it drag on the ground, then the chopped top might be in character. But, that's not my liking. As soon as lowering moves the center of the wheel above the center of the fender opening, it has gone too far. Besides, I like my headroom! __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

02-23-2008, 12:54 PM	#6
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: New here. Kinda long welcome from NOR CAL. Hey its your truck, but I agree choped longbeds look a bit strange. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

02-23-2008, 12:58 PM	#7
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: New here. Kinda long welcome from texas!!! ya know i personally dont like the chopped look, or the lowered look. i go more for a lift kit and knobby tires!! then again im a country boy so that might have something to do with it... lol hey, i just got an idea!! everybody lowers there trucks and chops there roof but ive never seen anybody put a lift kit AND lift there roof. you know the opposite of a chop? lol good luck with the truck!! John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

02-23-2008, 02:02 PM	#8
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: New here. Kinda long Factory body lines, stance and equipment are ageless.

02-23-2008, 05:12 PM	#9
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: New here. Kinda long Welcome from Texas. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

02-23-2008, 05:52 PM	#10
ryan913 Registered User Join Date: Jan 2008 Location: kenton, oh Posts: 183	Re: New here. Kinda long Welcome from north western Ohio. I also agree with keeping the factory body lines and not chopping the top. Enjoy your build!

02-23-2008, 05:57 PM	#11
Wolfinthesnow I put the laughter n slaughter Join Date: Feb 2008 Location: Plant City, Fl Posts: 172	Re: New here. Kinda long Well, like i said, am still unsure if i want to try to do the chop. Didnt think about how it will look 5-10 yrs down the road. Guess its easier to leave her alone for now. Thanks for the input, perhaps it will keep me from messing up a good thing.. I think the pics of my old 63 are here. Still learnin the board ya know. __________________ I still dont care how you did it in California!!!

02-23-2008, 06:05 PM	#12
Wolfinthesnow I put the laughter n slaughter Join Date: Feb 2008 Location: Plant City, Fl Posts: 172	Re: New here. Kinda long One more try on the 63 pics Attached Images __________________ I still dont care how you did it in California!!!

02-23-2008, 06:18 PM	#13
Wolfinthesnow I put the laughter n slaughter Join Date: Feb 2008 Location: Plant City, Fl Posts: 172	Re: New here. Kinda long Heres a pic of the 64 gmc. Not to rub it in but the only rot on this truck is about the size of a mans hand in each floor pan, everything else is good. And all it cost me was fuel to go fetch it. Sorry bout the pic quality, was taken by camera phone. Attached Images __________________ I still dont care how you did it in California!!!

02-23-2008, 07:02 PM	#14
65stepside Registered User Join Date: Oct 2004 Location: Boise, ID Posts: 113	Re: New here. Kinda long Hey, I'll give a shout out to choppin' I have a 1960 with 3" chopped. I didn't do it, so I couldn't tell ya how to chop, but I think the chopped look goes well as long as its lowered. I like the pics of your 63!!! __________________ 1930 Olds 5 Window Coupe 1960 Chevy 1/2 Short Stepside on 1965 Frame 350/350 1960 Chevy 1/2 3'' Chop Short Stepside "FOR SALE!!!" 1966 Toronado 1971 Cutlass 1972 442 1978 Chevy 1/2 Long Fleetside 2001 Dodge 2500

02-23-2008, 08:02 PM	#15
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: New here. Kinda long Wolfinthesnow: That is a fine looking rig...I hope you keep it factory. It will stand out more since it is not chopped or lowered, more so than if it was like everyone else's truck. The craze right now is to see how low you can go, but that will fade with time, like everything else. Welcome aboard from Kansas City, KS.



Register or Log In To remove these advertisements.

02-23-2008, 08:45 PM	#16
badriand Registered User Join Date: Sep 2007 Location: east texas Posts: 463	Re: New here. Kinda long Good looking truck, if you still got an itch to chop sure there are several people on here that would trade you another truck to chop. That one look in to good of shape. Wish i had that bed, mine is going to take a while to sort out.

02-23-2008, 08:58 PM	#17
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Re: New here. Kinda long I think that is a great truck for free. I would have jumped on it. Sorry to do this, but seeing you didn't have to pay for the truck maybe the cash was to go somewhere else like here for instance http://main.diabetes.org/site/TR?pg=...065&px=4036316 I know i'm bad but i'm trying to help a good cause. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

02-24-2008, 03:16 AM	#19
badriand Registered User Join Date: Sep 2007 Location: east texas Posts: 463	Re: New here. Kinda long I have a little bit of lilred66 and 502trippower in me. I like to keep as original as possible on the body but i have got to lower one also. I think about all older trucks look good with some lower stance (that is if they are 2 wheel drive). However some look great at stock also, but i always seem to get the terd looking ones so i lower to make the terd look better.

02-24-2008, 07:58 AM	#20
oldblu65 Registered User Join Date: Jul 2005 Location: " The Scenic City " Posts: 189	Re: New here. Kinda long Welcome from the great state of Tennessee !

02-24-2008, 08:11 AM	#21
kris's66lwb resident wrencher Join Date: Dec 2006 Location: ramona california Posts: 720	Re: New here. Kinda long my k20 i have its lifted and some guy at the gas station asked me if i choped the top

02-24-2008, 07:43 PM	#23
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: New here. Kinda long Welcome bro....Nor Cal here too. That '63 you had was nice.....the 64 you got looks great as well. I would do what YOU think is right....either way everyone here will help you out. My opinion would be to leave the roof stock. Good Luck !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-24-2008, 08:59 PM	#24
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	Re: New here. Kinda long couldnt find the "beating the dead horse" pic... but i dont think lowering will fade. I dont consider it a trend. Anyway, I agree with chief that if YOU think it looks good then go for it. As long as you dont add a a wood spoiler and ground effects. And I also want to add that you handled peoples opinions very well. Sometimes people get offended. With that being said.. I vote to leave it unchopped. __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com

02-24-2008, 09:12 PM	#25
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: New here. Kinda long The key to the customs is doing it RIGHT! To each his own on what looks good or great....but if it is done half a---d it never looks good. If you decide to chop, take your time and get help or advice from those who have done it before. There have been some trucks on here before hacked and chopped that in all honesty were done wrong and look terrible. The owner may think it looks good, but sorry they don't. Funny part is from a distance pic they look good, then they threw in the close-up and ooooh.........Take your time, do it right! Jerry

Register or Log In To remove these advertisements.