clear tails 1972 c10

[ohsocountry86]

Hi im was wondering i have seen some trucks with them im looking for the clear tails for my 72 i cant find them anywere.
also wasnt sure if this is were i post this thanks alot for your help

[Longhorn Man]

i think every single vendor sells them.
Here's the list of vendors that support this board. http://67-72chevytrucks.com/vboard/showgroups.php the ones towards the bottom in red.
I'd bet a kick in the daddy parts that they all have them, and if not, they can get them to you with the quickness.

[ohsocountry86]

mayb im dumb i didnt see anything should i just start emailing people not trying to be dumb new to this just got truck. when i type it in on google or ebay it just shows me reverse light not the othe peice in clear. if anyone gets alink that would be awesome

[Longhorn Man]

e- bay;
http://cgi.ebay.com/ebaymotors/67-68...spagenameZWDVW
some with built in LEDs... much better;

http://musclerodzstore.com/index.asp...ROD&ProdID=435
And here's another... I have been hearing great things about him. If he has an online catalog, I was too impatient to locate it, but call him (cell minuits are cheap) and I'll bet he'll hook you up
http://www.christiansclassics.com/default.htm

No one's callin you dumb man... and if I came across like that, then i am sorry.
Welcome to the board

[ohsocountry86]

o no i didnt mean it like that thanks alot mayb you can help me figure something out did the grill on my truck only come on cheyenne's and i only have the upper molding might be alook the last owner was going for but its not a cheyenne but has the upper molding and that grill help me figure out what my parts are off of sorry i only have that small pic in my avatar

[ohsocountry86]

ok yet another question i know i have alot of them, do those led ones just plug right in i havent looked at how my truck ones look or are wired

[Slammed70]

Originally Posted by ohsocountry86

ok yet another question i know i have alot of them, do those led ones just plug right in i havent looked at how my truck ones look or are wired

If you look at the socket there hanging off the bottom of the ones posted in that pic. Notice they use the 1157 style socket just like the factory bulbs. Just remove the factory lens/gasket. Remove factory bulb, then plug those into the exhisting harness in the truck. Then bolt the assembly up as you would the factory lens.

Might need one of them specialty flashers too, most LEDs dont work with standard 552 flashers. Or so Ive noticed.....

[Musclerodz]

We can get them, but don't stock them anymore. They are iffy when it comes to being DOT legal. You can call me to order them and I can have them drop shipped. They are $59 for the pair plus shipping. Most people have not had to use the electronic flasher, but some have.

[tim21391]

i got clear taillights. and clear turning signals in my front bumper...i got them both from lmctuck.com i dont remember the price of them..but www.manestruckparts.com i found out was cheaper so check out manestruckparts they have a bunch of goodies they have good shipping to..i bought a door sill plate from them and i got it a day or two later..heres is a pick of my lense..its just a lense not the l.e.d...my kit came with new gaskets and new bulbs. and lense

[tim21391]

[tim21391]

kinda off topic but anybody know where to get clear side marker lights....srry man for askin while we are on your topic

[tim21391]

my truck on the left with the clear lenses buddy of mine on the right....at a little car show and cruise we do every thursday in the summer

[463]

Originally Posted by ohsocountry86

o no i didnt mean it like that thanks alot mayb you can help me figure something out did the grill on my truck only come on cheyenne's and i only have the upper molding might be alook the last owner was going for but its not a cheyenne but has the upper molding and that grill help me figure out what my parts are off of sorry i only have that small pic in my avatar

big pic in your profile looks like the grill is compleat http://67-72chevytrucks.com/vboard/member.php?u=40255 (could not get the photo to copy)

[Longhorn Man]

Originally Posted by ohsocountry86

...did the grill on my truck only come on cheyenne's and i only have the upper molding might be alook the last owner was going for but its not a cheyenne but has the upper molding and that grill help me figure out what my parts are off of...

The grill is the only one offered in 71 and 72. It came on all 10 - 30 series trucks regardless of trim/option level.
The upper trim, and even lower trim were avalible as there own option, and independent of each other.
If the SPID (option sheet) is still in the glove box, then you'll be able to tell if the trim is original or not.

[mbgmike]

We sell the clear lenses. We only have the red ones in stock today. We sell them for $6.50 each.for rear lights. On-line price a little higher.

[Classic Heartbeat]

Just an FYI. Clear side marker lenses and clear taillight lenses are strickly illegal. We use to sell them untill we learned from SEMA that the Feds were going to start tracking down the manufacturers and retailers and start fining us. That is when we discontinued them. The problem with the lenses are they do not reflect back red when lit up with another vehicles lights. Red bulbs, or red LEDs do not make the lense reflect back red. That is a Federal law. We use to sell them warning people that they were for off road and show pourposes only and the Feds say that because can not control when they are used, that was not a legitimate disclaimer. I think that big brother shouldn't be making people responcible for other people's actions, but they do. So untill the law changes we will not be selling them. WES

[tim21391]

the law must be different in salina, ks.... i had many cops beind me while i was driving.. past a few cops going the same direction..been pulled over for speeding and nobody never said anything about my clear lenses

[ohsocountry86]

ok i know there not illegal everywere and even if they are im not worried about it im looking for all 4 side markers in clear hopfully the one peice look not clear on top of clear anyone know were i can find those

[Homeboy]

This is from the Oregon.gov Transportation Safety website;

http://www.oregon.gov/ODOT/TS/Veh_Equipment.shtml

LIGHTS

13) Are "Altezza" or European tail/brake light and front marker lenses legal for street use in Oregon?

Answer: Oregon has adopted the Federal Motor Vehicle Safety Standard 108 for lighting equipment. The standard is very specific for tail/brake light lenses and front side marker light lenses. The standard requires red lenses (not red bulbs) for the tail/brake lights and red rear and side reflex reflectors and red side marker lights. A separate rear side marker light and reflex reflector may also be allowed for the rear lighting system to meet the standard. The front side marker lens lights can be either white or amber (yellow) and must also have an amber (yellow) reflex reflector incorporated into the lens or have a separate side marker light and reflex reflector to meet the standard. So, the answer to the question is in most cases after-market (non-original equipment) "Altezza" or European tail/brake and front marker light lenses are NOT legal for street use in Oregon. They usually lack the required reflex reflectors and side marker lights. Here is a link to a Web site with more information. http://fmvss108.tripod.com Note the "Recalls" section. Most all of the after-market "Altezza" and European lenses have been recalled for not meeting FMVSS 108. (ORS 816.010).

I know the clear tails are illegal in Texas, I wasn't able to get an inspection sticker on my S-10 with a set of them on.

[ohsocountry86]

I am not trying to sound rude at all but again i dont care truck is not for daily driving and the police are worried about honda acura etc... so if anyone knows were i can get the side marker that would be awesome thanks

[72swb_327stroker_?]

i got mine on ebay. i think i paid about 50 bucks shipped, came with gaskets.
here is the link; http://cgi.ebay.com/ebaymotors/1967-...spagenameZWD1V

[ohsocountry86]

do you know if they sell ones like that which is one square and still clear or mayb this is a stupid ? but is there a way to get the red/orange off the ones i have thanks

[72swb_327stroker_?]

like these?http://cgi.ebay.com/ebaymotors/NEW-6...3286.m20.l1116

[ohsocountry86]

dang ur good i have been looking for awile ? thoe i have clears in my bumper and clear in the back do you think those will look clear like my others dont they look like only part of it is clear also do u know if there is a way to remove the red/orange off the ones i have thanks man

[72swb_327stroker_?]

i have clears all the way around mine too.
they are clear like all your other ones.
and there is no way to de-color the plastic lenses.
they are amber or red all the way through... its a dye put into the liquid-plastic mix when they manufacture them.