much modified 48 trik - The 1947 - Present Chevrolet & GMC Truck Message Board Network

weldvair@embarqmail. · 03-03-2008, 05:53 AM

I did the following to my 1948 trk:
1.extended the cab 3" & frame
2.chopped the top
3.removed the drip rails
4.make a beb w/caddy fins
5. 350/700r4/9" Rear

If you want to see more picsw let me know.

Don Meyer

prostreeter58 · 03-03-2008, 06:11 AM

Quote:

Originally Posted by weldvair@embarqmail.

I did the following to my 1948 trk:
1.extended the cab 3" & frame
2.chopped the top
3.removed the drip rails
4.make a beb w/caddy fins
5. 350/700r4/9" Rear

If you want to see more picsw let me know.

Don Meyer

Well hell yeah we wanna see more............post up buddy......

Cole_lol · 03-03-2008, 06:14 AM

Really COOL show us some more pictures

weldvair@embarqmail. · 03-03-2008, 07:02 AM

Here is another pic....Don Meyer

Smokejohnson · 03-03-2008, 07:20 AM

The more pic's the better

Daniel U · 03-03-2008, 10:24 AM

We love pictures around here. The more the merrier. What did you do for the chassis?

weldvair@embarqmail. · 03-03-2008, 07:18 PM

Frame boxed, extended,Zed in back,K-member,Must II w/ps,crysler SW rear springs, 9" Ford, sross flow alum radiator.......etc

Pic of door chopped & extended 3" to make more room in the cab. 350/700R4/3.89

Don Meyer-Mech Engr(retired)
St Cloud,Fl

Igotachevyor2 · 03-03-2008, 10:00 PM

looks great

poncho_villa · 03-04-2008, 03:19 AM

This looks great! Don't spare us any details. What material did you use for the consol? What about the bed floor?

orgalmeister · 03-04-2008, 04:38 AM

Yeah we LOVE pics. It's easier than reading.

weldvair@embarqmail. · 03-04-2008, 05:24 AM

Used steel for both.....Don

weldvair@embarqmail. · 03-04-2008, 05:29 AM

Fender support .....fiberglass. Made this when I made a GMC hood from a Chevy hood.

weldvair@embarqmail. · 03-04-2008, 05:32 AM

door panel. Not yet finished. Made from Home Depot insulating board, foam & vinyll.

weldvair@embarqmail. · 03-04-2008, 08:06 AM

Here is a pic of a Chevy hood bring modified to fit a GMC grill.
Don

poncho_villa · 03-05-2008, 04:25 AM

Do you have any pics of when you did the frame mods or box installation. Those newer style boxes look great on these trucks.

weldvair@embarqmail. · 03-05-2008, 06:25 AM

Poncho, I have those pics on another computer that crashed(bad LCD) & I do not know how to retrive them.....sorry Don meyer

Here are some additional pics of my Brother's & my projects www.meyerbrosrods.com

weldvair@embarqmail. · 03-11-2008, 03:53 AM

I am not getting many replies on my pics so this will probably be my last do to lack of interest.
Note..I cut the rear of the frame off & welded a pc of square stock to the top of the frame to mount the rear spring hanger. This moved the spring up 4" in the rear & lowered the trk 2".

Don Meyer, Mech Engr.

poncho_villa · 03-11-2008, 04:26 AM

Sorry Don, I meant to comment on that link. but got lost on other posts. I was admiring your brothers truck in that link, but was more interested in your truck and any details of cab/bed mounting on that chassis. I did see your leaf spring re-location on another thread and was wondering about those welds and the stress on them, But it looks like an excellent way to lower the rear and maintain the spring rate.

Smokejohnson · 03-11-2008, 04:30 AM

Don't stop with the pic please the more the better. Everything looks awsome.

weldvair@embarqmail. · 03-11-2008, 05:18 AM

The tubing is welded solid on the inner frame rail & boxed. The welds you see are just spot weldes. The tubing is also bolted to the frame.

Don

72BlckButy · 03-11-2008, 05:30 AM

what a project!!!

More pics would be great....

Daniel U · 03-11-2008, 07:47 AM

How soon until you think it's completed?

weldvair@embarqmail. · 03-13-2008, 06:35 AM

Daniel, I stopped working on the trk last may when I found a Corvair conv't for $1200 & am just finishing that project.

This weekend I will start back on the yellow trk(Buford). I'll take pics as I progress. It should be done this summer. I want to drive it to the street rod nationals in Tampa this fall.

Don Meyer

weldvair@embarqmail. · 03-18-2008, 06:40 AM

A couple of pics.

I started working on the 48 after being away from it for 7-8 month .
It took me an hour just to remove the dust from it. I spent the day trying to align the hood/fenders/grill. Since I made the core support & the a GMC hood from a Chevy hood it looks like it will take a few days to get it looking right.
( a lot of cutting & welding.

Also the bottom of the bed .just forword of the fenders is hitting the rear running board support. Looks like I will hav to redesign the rear supports.

Don Meyer

Daniel U · 03-18-2008, 06:20 PM

Looks like a lot of work.

03-03-2008, 05:53 AM	#1
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	much modified 48 trik I did the following to my 1948 trk: 1.extended the cab 3" & frame 2.chopped the top 3.removed the drip rails 4.make a beb w/caddy fins 5. 350/700r4/9" Rear If you want to see more picsw let me know. Don Meyer Attached Images

03-03-2008, 06:14 AM	#3
Cole_lol Registered User Join Date: Dec 2007 Location: Haysville, KS Posts: 40	Re: much modified 48 trik Really COOL show us some more pictures Last edited by Cole_lol; 03-03-2008 at 06:15 AM.

03-03-2008, 07:02 AM	#4
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik Here is another pic....Don Meyer Attached Images

03-03-2008, 07:20 AM	#5
Smokejohnson Registered User Join Date: Nov 2007 Location: Manitoba Canada Posts: 111	Re: much modified 48 trik The more pic's the better

03-03-2008, 10:24 AM	#6
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: much modified 48 trik We love pictures around here. The more the merrier. What did you do for the chassis? __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

03-03-2008, 07:18 PM	#7
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik Frame boxed, extended,Zed in back,K-member,Must II w/ps,crysler SW rear springs, 9" Ford, sross flow alum radiator.......etc Pic of door chopped & extended 3" to make more room in the cab. 350/700R4/3.89 Don Meyer-Mech Engr(retired) St Cloud,Fl Attached Images Last edited by weldvair@embarqmail.; 03-18-2008 at 06:26 AM.

03-03-2008, 10:00 PM	#8
Igotachevyor2 Apache Club Join Date: Jan 2006 Location: Goodlettsville,Tn. Posts: 1,294	Re: much modified 48 trik looks great __________________ 58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA My Trucks Apache Sitting Idle MySpace Project Dad's Truck (74 C-10 to K-10 conversion) .

03-04-2008, 03:19 AM	#9
poncho_villa Registered User Join Date: Feb 2005 Location: B.C. Posts: 457	Re: much modified 48 trik This looks great! Don't spare us any details. What material did you use for the consol? What about the bed floor?

03-04-2008, 04:38 AM	#10
orgalmeister Registered User Join Date: Aug 2004 Location: North Carolina Posts: 291	Re: much modified 48 trik Yeah we LOVE pics. It's easier than reading. __________________ '56 truck (the never ending project) '06 Z/71 loaded (daily driver) '07 Mercedes-Benz C-Class (wife's driver) Gone: 72 SB, 67 CST, 57 BBW, 47 Panel streetrod,

03-04-2008, 05:24 AM	#11
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik Used steel for both.....Don

03-04-2008, 05:29 AM	#12
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik Fender support .....fiberglass. Made this when I made a GMC hood from a Chevy hood. Attached Images

03-04-2008, 05:32 AM	#13
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik door panel. Not yet finished. Made from Home Depot insulating board, foam & vinyll. Attached Images Last edited by weldvair@embarqmail.; 03-04-2008 at 05:34 AM.

03-04-2008, 08:06 AM	#14
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik Here is a pic of a Chevy hood bring modified to fit a GMC grill. Don Attached Images

03-05-2008, 04:25 AM	#15
poncho_villa Registered User Join Date: Feb 2005 Location: B.C. Posts: 457	Re: much modified 48 trik Do you have any pics of when you did the frame mods or box installation. Those newer style boxes look great on these trucks.

03-05-2008, 06:25 AM	#16
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik Poncho, I have those pics on another computer that crashed(bad LCD) & I do not know how to retrive them.....sorry Don meyer Here are some additional pics of my Brother's & my projects www.meyerbrosrods.com Last edited by weldvair@embarqmail.; 03-05-2008 at 07:16 AM. Reason: add pics



Register or Log In To remove these advertisements.

03-11-2008, 03:53 AM	#17
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik I am not getting many replies on my pics so this will probably be my last do to lack of interest. Note..I cut the rear of the frame off & welded a pc of square stock to the top of the frame to mount the rear spring hanger. This moved the spring up 4" in the rear & lowered the trk 2". Don Meyer, Mech Engr. Attached Images

03-11-2008, 04:26 AM	#18
poncho_villa Registered User Join Date: Feb 2005 Location: B.C. Posts: 457	Re: much modified 48 trik Sorry Don, I meant to comment on that link. but got lost on other posts. I was admiring your brothers truck in that link, but was more interested in your truck and any details of cab/bed mounting on that chassis. I did see your leaf spring re-location on another thread and was wondering about those welds and the stress on them, But it looks like an excellent way to lower the rear and maintain the spring rate.

03-11-2008, 04:30 AM	#19
Smokejohnson Registered User Join Date: Nov 2007 Location: Manitoba Canada Posts: 111	Re: much modified 48 trik Don't stop with the pic please the more the better. Everything looks awsome.

03-11-2008, 05:18 AM	#20
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik The tubing is welded solid on the inner frame rail & boxed. The welds you see are just spot weldes. The tubing is also bolted to the frame. Don

03-11-2008, 05:30 AM	#21
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: much modified 48 trik what a project!!! More pics would be great.... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-11-2008, 07:47 AM	#22
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: much modified 48 trik How soon until you think it's completed? __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

03-13-2008, 06:35 AM	#23
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik Daniel, I stopped working on the trk last may when I found a Corvair conv't for $1200 & am just finishing that project. This weekend I will start back on the yellow trk(Buford). I'll take pics as I progress. It should be done this summer. I want to drive it to the street rod nationals in Tampa this fall. Don Meyer Attached Images Last edited by weldvair@embarqmail.; 03-13-2008 at 06:37 AM. Reason: add pic

03-18-2008, 06:40 AM	#24
weldvair@embarqmail. Registered User Join Date: Feb 2008 Location: st cloud, fl Posts: 266	Re: much modified 48 trik A couple of pics. I started working on the 48 after being away from it for 7-8 month . It took me an hour just to remove the dust from it. I spent the day trying to align the hood/fenders/grill. Since I made the core support & the a GMC hood from a Chevy hood it looks like it will take a few days to get it looking right. ( a lot of cutting & welding. Also the bottom of the bed .just forword of the fenders is hitting the rear running board support. Looks like I will hav to redesign the rear supports. Don Meyer Attached Images

03-18-2008, 06:20 PM	#25
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: much modified 48 trik Looks like a lot of work. __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

Register or Log In To remove these advertisements.