59 Cadillac tail lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hair · 03-06-2008, 08:32 PM

I'd like to see some pictures of different tail lights that people have molded into the rear fenders of a step side. Does anyone have a picture of a set of 59 Cadillac tail lights molded into the fenders of a step side?

shifty · 03-06-2008, 08:33 PM

I've seen it, and it looks like complete ass, IMO.

As a fellow stepside driver, I've seen about every combo known to man in the rear, including using a channeled El Camino bumper and frenching tail lights into the rear wheel well.

Almost all of it looks like crap.

You can probably dig up a couple of other threads on tail light treatements for stepsides using hte Search feature.

shifty · 03-06-2008, 08:38 PM

Here is one of many results I got with pictures after searching for "stepside tail lights":

http://67-72chevytrucks.com/vboard/s...de+tail+lights

There is one with caddy lights frenched in the rollpan. There are other threads with pics on the sides, but you gotta search it out on your own.

Cross-posting the exact same request in the Jimmys and Blazers forum probably wasn't the best course of action. Crossposting is against the rules you agreed to when you signed up

shifty · 03-06-2008, 08:39 PM

And more ... http://67-72chevytrucks.com/vboard/s...de+tail+lights

Hair · 03-06-2008, 09:50 PM

About the crossposting... I thought I was in this area when I posted that and then I couldn't find my post in this section so I posted it again. Now that you have informed me of that I know what happened to me. I'm sort of new at this forum stuff. I just messed up. As far as those rules go, I stopped reading them after about 6 hours and just clicked "agree". Sorry to anyone who has been hurt by my accidental misconduct.
I'm with you one the tail lights looking bad, but I don't care for the stock set-up either and I absolutely hate them in the roll pan so I'm thinking, but thanks a lot for the help that's what I wanted to see. A few of my ideas were already on there and I didn't like them either

shifty · 03-06-2008, 10:55 PM

No worries, we've probably all been there and done that. Just making sure you saw it in one thread or the other

I hafta admit, the setup I like best is ditching the reverse lights, and putting the smaller red lights in their place (ditch the "dumbo ear" brake lights).

I think the smnaller 2" daimeter lights with the bezels looks great. It is pretty amazing what everyone thinks of to do, though.

03-06-2008, 08:32 PM	#1
Hair Registered User Join Date: Mar 2008 Location: Tullahoma, TN Posts: 406	59 Cadillac tail lights I'd like to see some pictures of different tail lights that people have molded into the rear fenders of a step side. Does anyone have a picture of a set of 59 Cadillac tail lights molded into the fenders of a step side?

03-06-2008, 08:33 PM	#2
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: 59 Cadillac tail lights I've seen it, and it looks like complete ass, IMO. As a fellow stepside driver, I've seen about every combo known to man in the rear, including using a channeled El Camino bumper and frenching tail lights into the rear wheel well. Almost all of it looks like crap. You can probably dig up a couple of other threads on tail light treatements for stepsides using hte Search feature. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 03-06-2008 at 08:35 PM.

03-06-2008, 08:38 PM	#3
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: 59 Cadillac tail lights Here is one of many results I got with pictures after searching for "stepside tail lights": http://67-72chevytrucks.com/vboard/s...de+tail+lights There is one with caddy lights frenched in the rollpan. There are other threads with pics on the sides, but you gotta search it out on your own. Cross-posting the exact same request in the Jimmys and Blazers forum probably wasn't the best course of action. Crossposting is against the rules you agreed to when you signed up __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-06-2008, 08:39 PM	#4
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: 59 Cadillac tail lights And more ... http://67-72chevytrucks.com/vboard/s...de+tail+lights __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-06-2008, 09:50 PM	#5
Hair Registered User Join Date: Mar 2008 Location: Tullahoma, TN Posts: 406	Re: 59 Cadillac tail lights About the crossposting... I thought I was in this area when I posted that and then I couldn't find my post in this section so I posted it again. Now that you have informed me of that I know what happened to me. I'm sort of new at this forum stuff. I just messed up. As far as those rules go, I stopped reading them after about 6 hours and just clicked "agree". Sorry to anyone who has been hurt by my accidental misconduct. I'm with you one the tail lights looking bad, but I don't care for the stock set-up either and I absolutely hate them in the roll pan so I'm thinking, but thanks a lot for the help that's what I wanted to see. A few of my ideas were already on there and I didn't like them either

03-06-2008, 10:55 PM	#6
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: 59 Cadillac tail lights No worries, we've probably all been there and done that. Just making sure you saw it in one thread or the other I hafta admit, the setup I like best is ditching the reverse lights, and putting the smaller red lights in their place (ditch the "dumbo ear" brake lights). I think the smnaller 2" daimeter lights with the bezels looks great. It is pretty amazing what everyone thinks of to do, though. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.