1967 Front Clip in Meriden, KS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wildcat · 03-17-2008, 12:49 AM

Original 1967 front clip. Includes hood, grille, core support, fenders, and inner fenders. All parts have small dings/dents that are expected with original sheet metal. The chrome letters on the hood are all there and are in good shape. The hood latch is still on the hood and the striker is still on the core support. The grille is still on the core support and includes trim (small dent on top piece), signal housings, headlight buckets and rings. There are two dents down low on the grille but should be behind the bumper when mounted. The core support has some rust below the battery. The battery tray is there but has been cut to accept a larger battery. The inner fenders are rough. The passenger fender will need two patches. It also has a dent on the top/front that is about 4 inches long that can be seen in the pictures. The driver side fender seems solid up front but will need a patch behind the wheel well. Overall the sheet metal is pretty straight and could be nice with patches. Asking $250 obo. Thanks for looking!

teeitup · 03-17-2008, 04:24 AM

Hey Wildact, where you at in Meriden? I'm down on Palmberg just south of the Post office.

dart_451 · 03-18-2008, 02:26 AM

i thought teeitup was just going by a new name?loren

Wildcat · 03-18-2008, 03:54 AM

Quote:

Originally Posted by teeitup

Hey Wildact, where you at in Meriden? I'm down on Palmberg just south of the Post office.

I assumed you knew. You drive right by my house when you go to work. I am across the road to the north from the driving range. I came to your house with Ryan to get a booster and a few other things several weeks ago. It's me...James. ha ha The board staff should designate a standard font that indicates sarcasm! I should have told you my board name.

teeitup · 03-18-2008, 05:47 AM

Hey James, OK, sorry I didn't realize that was you. I seen Meriden on here and I WOW someone close!!!

Wildcat · 03-18-2008, 08:55 AM

Quote:

Originally Posted by teeitup

Hey James, OK, sorry I didn't realize that was you. I seen Meriden on here and I WOW someone close!!!

I feel like the luckiest guy on the board living just a few miles from you! I need to sell some more stuff so I can get some more parts from you.

mkundo · 03-18-2008, 07:36 PM

Looking for a complete hood latch for '67- '68 hood.
Thanks

Wildcat · 03-18-2008, 10:11 PM

Quote:

Originally Posted by mkundo

Looking for a complete hood latch for '67- '68 hood.
Thanks

Yes, I have one. I am assuming you need the latch support/bolt that bolts to the hood also? $25 plus shipping.

chipflyer · 03-19-2008, 04:04 AM

I feel like the luckiest guy on the board living just a few miles from you!

ROGER THAT!

I think that I might have met you several weeks ago, didn't I? Always meeting somebody up at Randy's

Wildcat · 03-19-2008, 05:24 AM

I think that I might have met you several weeks ago, didn't I? Always meeting somebody up at Randy's

[/QUOTE]

Wasn't me. Are you up here on the north side?

chipflyer · 03-19-2008, 05:34 AM

I'm about 6 miles SW of Randy's, in the Meriden suburbs.

teeitup · 03-19-2008, 06:09 AM

Jeff, James was here one morning before you stopped by your weekend visit!!!

By the way you didn't make it this weekend

. GLAD TO HAVE BOTH OF YOU SO CLOSE!!!!!

03-17-2008, 12:49 AM	#1
Wildcat Registered User Join Date: Jan 2007 Location: Meriden, KS Posts: 13	1967 Front Clip in Meriden, KS Original 1967 front clip. Includes hood, grille, core support, fenders, and inner fenders. All parts have small dings/dents that are expected with original sheet metal. The chrome letters on the hood are all there and are in good shape. The hood latch is still on the hood and the striker is still on the core support. The grille is still on the core support and includes trim (small dent on top piece), signal housings, headlight buckets and rings. There are two dents down low on the grille but should be behind the bumper when mounted. The core support has some rust below the battery. The battery tray is there but has been cut to accept a larger battery. The inner fenders are rough. The passenger fender will need two patches. It also has a dent on the top/front that is about 4 inches long that can be seen in the pictures. The driver side fender seems solid up front but will need a patch behind the wheel well. Overall the sheet metal is pretty straight and could be nice with patches. Asking $250 obo. Thanks for looking! Attached Images

03-17-2008, 04:24 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1967 Front Clip in Meriden, KS Hey Wildact, where you at in Meriden? I'm down on Palmberg just south of the Post office. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-18-2008, 02:26 AM	#3
dart_451 Registered User Join Date: May 2007 Location: topeka,ks Posts: 77	Re: 1967 Front Clip in Meriden, KS i thought teeitup was just going by a new name?loren

03-18-2008, 05:47 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1967 Front Clip in Meriden, KS Hey James, OK, sorry I didn't realize that was you. I seen Meriden on here and I WOW someone close!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-18-2008, 07:36 PM	#7
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: 1967 Front Clip in Meriden, KS Looking for a complete hood latch for '67- '68 hood. Thanks __________________ Dan

03-19-2008, 04:04 AM	#9
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 1967 Front Clip in Meriden, KS I feel like the luckiest guy on the board living just a few miles from you! ROGER THAT! I think that I might have met you several weeks ago, didn't I? Always meeting somebody up at Randy's __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

03-19-2008, 05:24 AM	#10
Wildcat Registered User Join Date: Jan 2007 Location: Meriden, KS Posts: 13	Re: 1967 Front Clip in Meriden, KS I think that I might have met you several weeks ago, didn't I? Always meeting somebody up at Randy's [/QUOTE] Wasn't me. Are you up here on the north side?

03-19-2008, 05:34 AM	#11
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 1967 Front Clip in Meriden, KS I'm about 6 miles SW of Randy's, in the Meriden suburbs. __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

03-19-2008, 06:09 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1967 Front Clip in Meriden, KS Jeff, James was here one morning before you stopped by your weekend visit!!! By the way you didn't make it this weekend. GLAD TO HAVE BOTH OF YOU SO CLOSE!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.