Bagged 67 stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

isotek · 03-21-2008, 03:49 PM

I'm going to bag my 67 stepside and just want to see some pics of other guys rides. I searched for it but found alot of fleetside trucks, but i'm sure there are stepside out there also. One more this is, I would like to know the Max rear tire width I can run. I will have 2.5 spindles and bolt on c-notch. Thanks and again even if yu know of a link with this info will work also.

bedsled71 · 03-21-2008, 05:37 PM

if you click on my avatar you can see mine on my profile, ive posted some pics but i dont have any on my new computer

bedsled71 · 03-21-2008, 05:40 PM

mine

bedsled71 · 03-21-2008, 05:41 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=278484

jlaird · 03-21-2008, 06:20 PM

here are the ones I have on my hard drive

jlaird · 03-21-2008, 06:20 PM

2 more

toomanytoyz · 03-21-2008, 06:30 PM

jlaird, Thank's for the Pics..........

Nice Group of Steppers.

Rick

jlaird · 03-21-2008, 06:39 PM

Quote:

Originally Posted by toomanytoyz

jlaird, Thank's for the Pics..........

Nice Group of Steppers.

Rick

no problem man. That last blue one is SICK!

SCOTI · 03-21-2008, 09:36 PM

Quote:

Originally Posted by jlaird

no problem man. That last blue one is SICK!

Amen brother . . ....

isotek · 03-21-2008, 10:18 PM

Thanks for all the pics guys, it's what I was looking for very nice trucks. I think I will run 20" wheels and 40 series tires, I want to put 20x10 5" back spaceing on the rear and 20x8.5 on the front. Think that will work???

68laydout · 03-22-2008, 01:17 AM

Quote:

Originally Posted by isotek

Thanks for all the pics guys, it's what I was looking for very nice trucks. I think I will run 20" wheels and 40 series tires, I want to put 20x10 5" back spaceing on the rear and 20x8.5 on the front. Think that will work???

yup, with 5.25" BS on fronts and w/the early rear axles...later axles 3/4 wider on each side.

I've got 20x10's on my 68 with 5.5" BS and I'm now getting .5" spacers

shifty · 03-22-2008, 01:46 AM

More: http://67-72chevytrucks.com/vboard/s...d.php?t=255929

SCOTI · 03-22-2008, 02:02 AM

Quote:

Originally Posted by 68laydout

yup, with 5.25" BS on fronts and w/the early rear axles...later axles 3/4 wider on each side.

I've got 20x10's on my 68 with 5.5" BS and I'm now getting .5" spacers

Stepside?

1LoC10 · 03-22-2008, 04:09 AM

i have a 1000 pics in my sig

isotek · 03-22-2008, 09:44 PM

what size wheels are you guys running on these stepside trucks to keep them on the inside of the rear fenders, example hight and width. When I droped my truck the rear tire don't clear, I want to buy new set of wheels for my 67 short step Bagged. The rear end mesures from inside to inside of drum 56 1/2'' 5.5 lug. Thanks in advance.

c10addict · 06-28-2008, 09:23 PM

Im struggling with this right now... I decided to throw a step side bed on my 67 shop truck project... I have a kp notch welded in with 2 inch blocks... I was going to run steel 20" wheels but they bottom out in the fender... I am down to a 225/70/15 and it just touches the top of the fender when aired out... Thats 27.4 tall.... I'm ready to throw a fleet on it and stuff my 20's back under it...

GMBowtie79 · 06-28-2008, 09:58 PM

There was a article in Classic Truck on sectioning the fenders. They did it on a 50s Chevy truck but it could be a option if your dead set on keeping the step bed. Raise the bed and section the fenders so the body lines line up.

c10addict · 06-28-2008, 10:18 PM

Quote:

Originally Posted by GMBowtie79

There was a article in Classic Truck on sectioning the fenders. They did it on a 50s Chevy truck but it could be a option if your dead set on keeping the step bed. Raise the bed and section the fenders so the body lines line up.

I've looked at dooking that but not sure... I kinda dig how low it gets on 15's

6chevy9 · 07-01-2008, 04:27 AM

heres mine

stllookn · 07-04-2008, 02:34 AM

Bagged in back, cut coils in front. No notch...yet!

03-21-2008, 03:49 PM	#1
isotek Registered User Join Date: Feb 2008 Location: Morganton, NC Posts: 49	Bagged 67 stepside I'm going to bag my 67 stepside and just want to see some pics of other guys rides. I searched for it but found alot of fleetside trucks, but i'm sure there are stepside out there also. One more this is, I would like to know the Max rear tire width I can run. I will have 2.5 spindles and bolt on c-notch. Thanks and again even if yu know of a link with this info will work also.

03-21-2008, 05:37 PM	#2
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: Bagged 67 stepside if you click on my avatar you can see mine on my profile, ive posted some pics but i dont have any on my new computer

03-21-2008, 05:40 PM	#3
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: Bagged 67 stepside mine Attached Images

03-21-2008, 05:41 PM	#4
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: Bagged 67 stepside http://67-72chevytrucks.com/vboard/s...d.php?t=278484

03-21-2008, 06:20 PM	#5
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Bagged 67 stepside here are the ones I have on my hard drive Attached Images

03-21-2008, 06:20 PM	#6
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Bagged 67 stepside 2 more Attached Images

03-21-2008, 06:30 PM	#7
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Bagged 67 stepside jlaird, Thank's for the Pics.......... Nice Group of Steppers. Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

03-21-2008, 10:18 PM	#10
isotek Registered User Join Date: Feb 2008 Location: Morganton, NC Posts: 49	Re: Bagged 67 stepside Thanks for all the pics guys, it's what I was looking for very nice trucks. I think I will run 20" wheels and 40 series tires, I want to put 20x10 5" back spaceing on the rear and 20x8.5 on the front. Think that will work???

03-22-2008, 01:46 AM	#12
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Bagged 67 stepside More: http://67-72chevytrucks.com/vboard/s...d.php?t=255929 __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-22-2008, 04:09 AM	#14
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Bagged 67 stepside i have a 1000 pics in my sig __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-22-2008, 09:44 PM	#15
isotek Registered User Join Date: Feb 2008 Location: Morganton, NC Posts: 49	Re: Bagged 67 stepside what size wheels are you guys running on these stepside trucks to keep them on the inside of the rear fenders, example hight and width. When I droped my truck the rear tire don't clear, I want to buy new set of wheels for my 67 short step Bagged. The rear end mesures from inside to inside of drum 56 1/2'' 5.5 lug. Thanks in advance. Last edited by isotek; 03-23-2008 at 09:14 PM.

06-28-2008, 09:23 PM	#16
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Bagged 67 stepside Im struggling with this right now... I decided to throw a step side bed on my 67 shop truck project... I have a kp notch welded in with 2 inch blocks... I was going to run steel 20" wheels but they bottom out in the fender... I am down to a 225/70/15 and it just touches the top of the fender when aired out... Thats 27.4 tall.... I'm ready to throw a fleet on it and stuff my 20's back under it... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

06-28-2008, 09:58 PM	#17
GMBowtie79 Surviving, one day at a time! Join Date: Jan 2008 Location: Turlock,CA Posts: 295	Re: Bagged 67 stepside There was a article in Classic Truck on sectioning the fenders. They did it on a 50s Chevy truck but it could be a option if your dead set on keeping the step bed. Raise the bed and section the fenders so the body lines line up. __________________ 79 Burb,350,tremic 5 spd, 4 wheel disc, daily driver 74 swb,350,350,driver & future project "There's no such thing as a finished project" Last edited by GMBowtie79; 06-28-2008 at 10:02 PM.

07-01-2008, 04:27 AM	#19
6chevy9 Registered User Join Date: Jul 2007 Location: redding CA Posts: 65	Re: Bagged 67 stepside heres mine Attached Images __________________ 70 c10 bagged chevy its a life style

07-04-2008, 02:34 AM	#20
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Bagged 67 stepside Bagged in back, cut coils in front. No notch...yet! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.