What did you get done? Easter Edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 03-25-2008, 07:53 AM

I didnt do a dern thing this weekend truck related..in fact i spent all day easter painting my living room and saturday i had to deal with a client all day and go to a wake in the evening how about yall did the easter bunny bring ya truck parts??

hessian18 · 03-25-2008, 08:02 AM

I spent most of the day cleaning house, then worked on the truck for awhile.

I finished painting the driverside door and installed the door panels I painted..need to finish the passenger side and im done...

Im still fighting a light wiring problem

collin86 · 03-25-2008, 09:07 AM

i thought about doing a lot of things on my truck....instead i sat on this damn fourm all weekend looking at what my truck could look like someday if i ever worked on it. i hate computers sometimes

sjarrett71 · 03-25-2008, 12:24 PM

To cold to work outside on my truck

los-lowrider · 03-25-2008, 12:47 PM

Stayed in Paris the hole weekend. Very nice town to be. Can't remember that I ever walked that much.

bb1979 · 03-25-2008, 03:02 PM

Spent mine cleaning out the shed, and getting all the tools and equipment organised to bring my truck in over winter

slug · 03-25-2008, 04:04 PM

saturday i built the foundation for my portable building so i can store all my tools in so i can put the 83 in the garage. got the 83 fired up saturday for the first time in 7 years. i had the timing spot on and it fired up on the first crank, i was excited, i called my dad just to brag. didn't do much of anything sunday except spend time with my kiddos and cleaned the garage a little.

Rooster's82 · 03-25-2008, 04:43 PM

Friday I got lit at the neighborhood BBQ, but while i was mingling with some of my new neighbors (i just moved to a new apartment complex) I meet a guy that said he has rebuilt over 100 steering columns. (see my thread on my trashed steering column). I also got my novelty horn in the mail...It makes animal noises (yes, it does a Rooster).

Saturday it rained from 9am to 5pm...leaving me trapped in my house with my girlfriend, to her delight. I got absolutely nothing done on my truck. I did do some cleaning and organizing around the house. She had some people over so i did the host thing for a little bit in the evening.

Sunday, i had to go to a wedding but before i left i ran into my neighbor that does steering columns and he asked for the key to my truck so he could take a look at it. I give it to him and when to the wedding...3 hours later i get home and he had pulled apart my doner column taken out the ignition switch, and turning signal switch and installed them in my truck as well as tightened all 4 screws that were causing the column to wobble. In short he did the entire fix for me. So i was pretty happy..but also a little disappointed, i wanted to help him so i could learn how it was done. Oh well, you can't look a gift horse in the mouth.

Oh, i also mounted my novelty horn Sunday morning...kind of neat , has a PA and all, but it's not very loud. Sort of disappointed...does anyone now how to bump up the volume on something like that?

What i didn't get too...

I need to put in a new water pump, the seal on the old one is bad right now so i'm just pouring water through my system daily.

I have wanted to clean and paint my engine bay for the last month...still haven't got to it.

I need to install new valve cover gaskets, they have been leaking for a good 20 years.

I didn't fix the 2 rust holes at the corners of my windshield, I have decided to go with the weld-less system that was recommended.

and last but not least find and install a 600cfm edelbrook carb....toss some new plugs and wires in while i'm at it.

cochino12 · 03-25-2008, 04:46 PM

Sold my 85 and picked up an 86 K20, with a new crate motor that I am going to use as a work truck. Got it buffed cleaned out, trailer controller and stereo wired, oil changed ...

http://67-72chevytrucks.com/vboard/s...d.php?t=284502

Also dropped my Blazer off to the tranny guy to get it fixed it started slipping and it only had like 100 miles on it. I hope I get it back soon I'm ready to start driving it, I've had it since may and only driven it once or twice

**N2TRUX** · 03-25-2008, 05:31 PM

I went to Atlanta on Wednesday. I spent Thursday with my family at the Georgia Aquarium which was really nice. The rest of the weekend I watched my daughter play volleyball.

BowTieOgre · 03-25-2008, 05:42 PM

I hit the junkyard on Saturday morning with another boardmember and didnt really find anything good so I went back to the house and washed both the trucks. I did get the th400 in the donor back in working order. Apparently a new filter/fluid and some Lucas was just what the doctor ordered, that saves me some $$ I thought I was going to have to spend.

Sunday was spent doing the family thing. This was my boy's first real Easter and he was in rare form after downing a few Peeps from his basket at 8am! Sometimes I wish I had the energy of a 2 year old.

**LEEVON** · 03-25-2008, 05:56 PM

Took Friday off (first non-family vaction day ever) to swap a 700R4 for the TH375? in my '87 swb. Hit the driveshaft shop first thing, ended up having to get a new d-shaft because of the extreme tailshaft length on the TH375. $148 later I was out the door with new shaft and u-joints, balanced and painted. Then off to the junyard where I found the 700R4 connector and vacuum switch for lockup. I also located several trucks with sway bars and talked them into removing one with the brackets for $40. Then off to the stealership for a new dipstick/tube. Spent the rest of the day installing, stopped at the x-member.

Saturday went to Missouri and pulled the '71 suburban out from behind the parent's barn. What a wild ride getting towed down the hill over the creek but the brakes held. Then I put three different tires on the RRear only to end up using fix-a-flat and a plug in the sidewall of one to get it rolling. I sold it to a soldier stationed in Bagdad. His father is sending a shipping company after it this week. Sad day but I would rather see it done!

Big truck weekend for sure. That's rare for me.

tds · 03-25-2008, 07:22 PM

well i ripped off all that fake plastic chrome trim on the tail gate and around the cab of the truck. ripped out the old interior carpet. reinstalled my seat belts with the exception of the passenger lower bolt since i need a good drill bit and an easy out to get the broken bolt out. cleaned out all of the extra body panels out of the bed. thats pretty much it. this week i plan to get new tanny lines and also get the motor a tune up with plugs, wires, belts and such

jdmaffeo · 03-25-2008, 07:23 PM

I did get some time for the truck this weekend on Saturday. I started another link for it here http://67-72chevytrucks.com/vboard/s...d.php?t=284330 .

I have some more metal cutting and welding to do to finish it up the way I want it. Hopefully my rollpan and other parts will arrive today and I can finish the mock up. I will then have to tear it back apart and then prime and paint fun can begin.

jchav62 · 03-25-2008, 07:54 PM

On Saturday, I sanded and primed the 'new' hood and fenders for the '73. I also cleaned and painted the hood hinges, alt. bracket and an Edelbrock intake that I picked up last week... next weekend, hopefully I'll go out to Rowe and put these parts on the truck....

...Easter was with the family... I hope everyone had a great Easter...jc

Prerunner1982 · 03-25-2008, 09:21 PM

After spending alot of the past 4 months fixing my wifes blazer.... This weekend I broke it. DOH!!.. The door mirrors are weak on the S10's. The three plastic mounting points get brittle over time and break easily with the vibration of living in the country. I already replaced the passenger side but the driver's side hadnt failed yet so I was going to let it ride. After driving down the highway on Ssaturday and seeing how much the mirror was moving around I knew it was going to come off soon.... what I didnt realize is that it would come off on Sunday when I hit it with my arm as I walked by the truck... Oh well...

SCOTI · 03-25-2008, 10:07 PM

Finished removing all automotive related parts from the driveway area & then slapped a front suspension on my 68 so I could load it up on my registered/tagged trailer.

All this work to complete the items I was 'cited' for when the city went through my neighborhood w/it's 'spring clean-up' program.

I'm not sure what I'm going to do about the truck. They say I can't have a partially assembled vehicle that's not tagged/inspected stored in a residential area. Covering it up is deemed not acceptable.

Frosty · 03-25-2008, 10:27 PM

I ran some water form the garden hose on it... that's about it. Had big plans for it this weekend too.

streetstar · 03-25-2008, 10:43 PM

Took the top off my K5 and cruised it ---- that was - and is fun . I had to make room in the garage for it - the top is heavy and its not going on for another 6 months - LOL

Changed the oil pan on a big block project i have on a stand.

thats it.

manimal · 03-25-2008, 11:51 PM

Put my new(to me) wheels on my truck....'05 Silverado 2500HD aluminum.Just waiting for the conversion nuts so I can put the caps on.

Sorry for the bad pic I used my phone..
-Lance

AceX · 03-26-2008, 12:19 AM

Not on the weekend, but today, like 10 minutes ago, a blew up a set of ARC6000 component speakers. I was acting on orders to try and blow the amplifier apart but instead smoked a set of $500 speakers. I'm awesome.

Now I just have to wait until I get back from Yuba City in 3 weeks to fix it. At least my door speakers still play...

dieselarmy13 · 03-26-2008, 12:44 AM

My weekend started off with a nice 2 hour roadtrip to pick up a seat from Randy (teeitup). Hell of a nice guy, I'd do business with him anyday. After that, it was another 4 hour drive to my parents in Nebraska. Couldn't ask for a better day for a roadtrip. 2-60 air conditioning the whole way through the scenic backroads of rural Kansas and Nebraska. When I finally got to my parents, it was time to work. I ripped out my sweet-ass 80's van seats, and put my new bench in.

After that, it was time for some rattle can magic. I wanted to do the whole front clip, but my trigger finger couldn't take anymore (neither could my buddy, seen stumbling out of the shop from paint fumes).

After that, it was time to paint my new rally's

Hoods69BadBowTie · 03-26-2008, 12:52 AM

Not a whole bunch of anything. Just messed around with my Camaro a little and took a look at my buddies car that is acting up. Other then that just hung out with family and friends.

1985K10 · 03-26-2008, 01:54 AM

Sandblasted my rebuilt rear axle....sandblasted right through the diff cover so now i need to clean it out and buy a new cover.....

87Lowrider · 03-26-2008, 06:06 AM

Finally got the motor put together this past week. Still have to put in the new wheel wells, install the control module, coil and new motor mounts before I drop the RAT in this weekend.

Before

After

03-25-2008, 07:53 AM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	What did you get done? Easter Edition I didnt do a dern thing this weekend truck related..in fact i spent all day easter painting my living room and saturday i had to deal with a client all day and go to a wake in the evening how about yall did the easter bunny bring ya truck parts?? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-25-2008, 08:02 AM	#2
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: What did you get done Easter Edition I spent most of the day cleaning house, then worked on the truck for awhile. I finished painting the driverside door and installed the door panels I painted..need to finish the passenger side and im done... Im still fighting a light wiring problem

03-25-2008, 09:07 AM	#3
collin86 Registered User Join Date: Sep 2007 Location: spokane, WA Posts: 136	Re: What did you get done Easter Edition i thought about doing a lot of things on my truck....instead i sat on this damn fourm all weekend looking at what my truck could look like someday if i ever worked on it. i hate computers sometimes __________________ 1986 swb...soon to be some weird pro touring look..but better 92 jeep cherokee.... crawler

03-25-2008, 12:24 PM	#4
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: What did you get done Easter Edition To cold to work outside on my truck __________________ -Scott-

03-25-2008, 12:47 PM	#5
los-lowrider Registered User Join Date: Feb 2005 Location: Germany, Krefeld Posts: 180	Re: What did you get done Easter Edition Stayed in Paris the hole weekend. Very nice town to be. Can't remember that I ever walked that much. Attached Images __________________ Best Regards from Germany! *www.los-lowrider.com*

03-25-2008, 03:02 PM	#6
bb1979 Registered User Join Date: Apr 2007 Location: NSW, Australia Posts: 205	Re: What did you get done Easter Edition Spent mine cleaning out the shed, and getting all the tools and equipment organised to bring my truck in over winter __________________ 1979 C20 pickup 454 big block turbo 400, 4.56 gears

03-25-2008, 04:04 PM	#7
slug Registered User Join Date: Jan 2008 Location: Groves,TX Posts: 483	Re: What did you get done Easter Edition saturday i built the foundation for my portable building so i can store all my tools in so i can put the 83 in the garage. got the 83 fired up saturday for the first time in 7 years. i had the timing spot on and it fired up on the first crank, i was excited, i called my dad just to brag. didn't do much of anything sunday except spend time with my kiddos and cleaned the garage a little. __________________ there is nothing better than cutting metal with fire.......except cutting metal with electricity!!!

03-25-2008, 04:43 PM	#8
Rooster's82 Registered User Join Date: Mar 2008 Location: Clearwater FL Posts: 271	Re: What did you get done Easter Edition Friday I got lit at the neighborhood BBQ, but while i was mingling with some of my new neighbors (i just moved to a new apartment complex) I meet a guy that said he has rebuilt over 100 steering columns. (see my thread on my trashed steering column). I also got my novelty horn in the mail...It makes animal noises (yes, it does a Rooster). Saturday it rained from 9am to 5pm...leaving me trapped in my house with my girlfriend, to her delight. I got absolutely nothing done on my truck. I did do some cleaning and organizing around the house. She had some people over so i did the host thing for a little bit in the evening. Sunday, i had to go to a wedding but before i left i ran into my neighbor that does steering columns and he asked for the key to my truck so he could take a look at it. I give it to him and when to the wedding...3 hours later i get home and he had pulled apart my doner column taken out the ignition switch, and turning signal switch and installed them in my truck as well as tightened all 4 screws that were causing the column to wobble. In short he did the entire fix for me. So i was pretty happy..but also a little disappointed, i wanted to help him so i could learn how it was done. Oh well, you can't look a gift horse in the mouth. Oh, i also mounted my novelty horn Sunday morning...kind of neat , has a PA and all, but it's not very loud. Sort of disappointed...does anyone now how to bump up the volume on something like that? What i didn't get too... I need to put in a new water pump, the seal on the old one is bad right now so i'm just pouring water through my system daily. I have wanted to clean and paint my engine bay for the last month...still haven't got to it. I need to install new valve cover gaskets, they have been leaking for a good 20 years. I didn't fix the 2 rust holes at the corners of my windshield, I have decided to go with the weld-less system that was recommended. and last but not least find and install a 600cfm edelbrook carb....toss some new plugs and wires in while i'm at it. __________________ JG If you can't find it at the junk yard you don't need it. Last edited by Rooster's82; 03-25-2008 at 04:47 PM.

03-25-2008, 04:46 PM	#9
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: What did you get done Easter Edition Sold my 85 and picked up an 86 K20, with a new crate motor that I am going to use as a work truck. Got it buffed cleaned out, trailer controller and stereo wired, oil changed ... http://67-72chevytrucks.com/vboard/s...d.php?t=284502 Also dropped my Blazer off to the tranny guy to get it fixed it started slipping and it only had like 100 miles on it. I hope I get it back soon I'm ready to start driving it, I've had it since may and only driven it once or twice Attached Images __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 03-25-2008 at 04:48 PM.

03-25-2008, 05:31 PM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done? Easter Edition I went to Atlanta on Wednesday. I spent Thursday with my family at the Georgia Aquarium which was really nice. The rest of the weekend I watched my daughter play volleyball. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-25-2008, 05:42 PM	#11
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: What did you get done? Easter Edition I hit the junkyard on Saturday morning with another boardmember and didnt really find anything good so I went back to the house and washed both the trucks. I did get the th400 in the donor back in working order. Apparently a new filter/fluid and some Lucas was just what the doctor ordered, that saves me some $$ I thought I was going to have to spend. Sunday was spent doing the family thing. This was my boy's first real Easter and he was in rare form after downing a few Peeps from his basket at 8am! Sometimes I wish I had the energy of a 2 year old. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

03-25-2008, 05:56 PM	#12
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: What did you get done? Easter Edition Took Friday off (first non-family vaction day ever) to swap a 700R4 for the TH375? in my '87 swb. Hit the driveshaft shop first thing, ended up having to get a new d-shaft because of the extreme tailshaft length on the TH375. $148 later I was out the door with new shaft and u-joints, balanced and painted. Then off to the junyard where I found the 700R4 connector and vacuum switch for lockup. I also located several trucks with sway bars and talked them into removing one with the brackets for $40. Then off to the stealership for a new dipstick/tube. Spent the rest of the day installing, stopped at the x-member. Saturday went to Missouri and pulled the '71 suburban out from behind the parent's barn. What a wild ride getting towed down the hill over the creek but the brakes held. Then I put three different tires on the RRear only to end up using fix-a-flat and a plug in the sidewall of one to get it rolling. I sold it to a soldier stationed in Bagdad. His father is sending a shipping company after it this week. Sad day but I would rather see it done! Big truck weekend for sure. That's rare for me. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

03-25-2008, 07:22 PM	#13
tds Registered User Join Date: Jul 2007 Location: minnesota Posts: 191	Re: What did you get done? Easter Edition well i ripped off all that fake plastic chrome trim on the tail gate and around the cab of the truck. ripped out the old interior carpet. reinstalled my seat belts with the exception of the passenger lower bolt since i need a good drill bit and an easy out to get the broken bolt out. cleaned out all of the extra body panels out of the bed. thats pretty much it. this week i plan to get new tanny lines and also get the motor a tune up with plugs, wires, belts and such __________________ 1981 - C-10 SCSB Planning on putting this thing on it's rocker!

03-25-2008, 07:23 PM	#14
jdmaffeo Registered User Join Date: Dec 2005 Location: Dallas, TX Posts: 241	Re: What did you get done? Easter Edition I did get some time for the truck this weekend on Saturday. I started another link for it here http://67-72chevytrucks.com/vboard/s...d.php?t=284330 . I have some more metal cutting and welding to do to finish it up the way I want it. Hopefully my rollpan and other parts will arrive today and I can finish the mock up. I will then have to tear it back apart and then prime and paint fun can begin. __________________ 1984 Chevy Stepside, 4spd granny, 4 1/2 front/6 inch rear drop.

03-25-2008, 07:54 PM	#15
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: What did you get done? Easter Edition On Saturday, I sanded and primed the 'new' hood and fenders for the '73. I also cleaned and painted the hood hinges, alt. bracket and an Edelbrock intake that I picked up last week... next weekend, hopefully I'll go out to Rowe and put these parts on the truck.... ...Easter was with the family... I hope everyone had a great Easter...jc __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 Last edited by jchav62; 03-25-2008 at 07:55 PM.



Register or Log In To remove these advertisements.

03-25-2008, 09:21 PM	#16
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: What did you get done? Easter Edition After spending alot of the past 4 months fixing my wifes blazer.... This weekend I broke it. DOH!!.. The door mirrors are weak on the S10's. The three plastic mounting points get brittle over time and break easily with the vibration of living in the country. I already replaced the passenger side but the driver's side hadnt failed yet so I was going to let it ride. After driving down the highway on Ssaturday and seeing how much the mirror was moving around I knew it was going to come off soon.... what I didnt realize is that it would come off on Sunday when I hit it with my arm as I walked by the truck... Oh well... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

03-25-2008, 10:07 PM	#17
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: What did you get done? Easter Edition Finished removing all automotive related parts from the driveway area & then slapped a front suspension on my 68 so I could load it up on my registered/tagged trailer. All this work to complete the items I was 'cited' for when the city went through my neighborhood w/it's 'spring clean-up' program. I'm not sure what I'm going to do about the truck. They say I can't have a partially assembled vehicle that's not tagged/inspected stored in a residential area. Covering it up is deemed not acceptable. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-25-2008, 10:27 PM	#18
Frosty Under desk Join Date: Feb 2008 Location: Castle Rock, Colorado Posts: 64	Re: What did you get done? Easter Edition I ran some water form the garden hose on it... that's about it. Had big plans for it this weekend too. __________________ Frosty Smith 1979 GMC 1/2 ton 2wd diesel that now has a 1976 Firebird V8 engine and is a 4X4 with a 7inch lift. The real question is would I have still bought it if I had known all this...

03-25-2008, 10:43 PM	#19
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	Re: What did you get done? Easter Edition Took the top off my K5 and cruised it ---- that was - and is fun . I had to make room in the garage for it - the top is heavy and its not going on for another 6 months - LOL Changed the oil pan on a big block project i have on a stand. thats it. __________________ Are you retired too? Nonsense! I'm in my prime

03-25-2008, 11:51 PM	#20
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: What did you get done? Easter Edition Put my new(to me) wheels on my truck....'05 Silverado 2500HD aluminum.Just waiting for the conversion nuts so I can put the caps on. Sorry for the bad pic I used my phone.. -Lance Attached Images __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT Last edited by manimal; 03-25-2008 at 11:53 PM.

03-26-2008, 12:19 AM	#21
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What did you get done? Easter Edition Not on the weekend, but today, like 10 minutes ago, a blew up a set of ARC6000 component speakers. I was acting on orders to try and blow the amplifier apart but instead smoked a set of $500 speakers. I'm awesome. Now I just have to wait until I get back from Yuba City in 3 weeks to fix it. At least my door speakers still play... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

03-26-2008, 12:44 AM	#22
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: What did you get done? Easter Edition My weekend started off with a nice 2 hour roadtrip to pick up a seat from Randy (teeitup). Hell of a nice guy, I'd do business with him anyday. After that, it was another 4 hour drive to my parents in Nebraska. Couldn't ask for a better day for a roadtrip. 2-60 air conditioning the whole way through the scenic backroads of rural Kansas and Nebraska. When I finally got to my parents, it was time to work. I ripped out my sweet-ass 80's van seats, and put my new bench in. After that, it was time for some rattle can magic. I wanted to do the whole front clip, but my trigger finger couldn't take anymore (neither could my buddy, seen stumbling out of the shop from paint fumes). After that, it was time to paint my new rally's __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

03-26-2008, 12:52 AM	#23
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: What did you get done? Easter Edition Not a whole bunch of anything. Just messed around with my Camaro a little and took a look at my buddies car that is acting up. Other then that just hung out with family and friends. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

03-26-2008, 01:54 AM	#24
1985K10 Registered User Join Date: Oct 2003 Location: CT Posts: 315	Re: What did you get done? Easter Edition Sandblasted my rebuilt rear axle....sandblasted right through the diff cover so now i need to clean it out and buy a new cover..... __________________ Anthony 07 Tahoe LT 70 Chevelle 450HP 383-TH400 77 GMC Royal Sierra~Resto in progress~

03-26-2008, 06:06 AM	#25
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,356	Re: What did you get done? Easter Edition Finally got the motor put together this past week. Still have to put in the new wheel wells, install the control module, coil and new motor mounts before I drop the RAT in this weekend. Before After __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside - SOLD 2005 Chevrolet Tahoe Z71

Register or Log In To remove these advertisements.