my project f/s in pieces alot of nos & good used parts.

[billsbowtie]

i am saleing most of my project parts . i have found a 68 swb that has already had alot of work done to it but it needs more to be the way i want it. so with my health not being the greatest . i am trading for the 68 and will drive and work on it at the same time.i have gathered up alot of parts and will be useing some of them on the 68 . but i have alot of extra parts to sale.
i know i want remember them all in this tread but i will try. large parts will be pick up only . i will post a few pics. but i don't have them of everything tonite. please post interested in tread before you pm me.i would like to sale the ft. end nos parts altogether.
nos gm left and right outer fenders fit 69/72.[SALE PENDING]
nos gm left and right inner fenders 67/72.[STILL F/S I'D RATHER NOT SHIP THESE]
nos rad. suport [SALE PENDING]outer fenders rad. suport and 1 of the inner fenders have never been on a truck. 1 inner fender was test fitted $1250.00 for 5 pieces. the outer fenders & rad. suport have some surface rust on them . rad suport has more than fenders . fenders were in a box till i got them home all 3 pieces were stored in roof of a building for 25 years. all parts will clean up good with some wet sanding.
2 rear red nos gm marker lights with trim still in boxes $60.00.
the swb frame in this pic. $250.00 it needs another coat of paint because it has some light spots here and there. i have 5 lug dis. brake ft. end for and extra $100.00 & a 5 lug rear end for a $100.00 more.
a painted auto trans crossmember $50.00 picked up or $70.00 shipped.
a good black auto colum with out steering wheel $75.00 picked up.
a good black head liner without trim $60.00 picked up or $80.00 shipped.
a good black orig. black bench seat $150.00 it has a couple bad spots but not bad. i may have it sold here local.
i will be adding more to this list threw out the next hour or so.
2 - hei dis. frist one good driver shape $35.00 picked up or $50.00 shipped.
the other one has a new cap and wires $60.00 picked up or $75.00 shipped.
doors left and right they are a good 8 out of 10 chrome vent windows good door panels $550.00 picked up or $400.00 for door shells picked up no shipping.
stripped down cab good shape but needs most of the reg. patches some one cut the low hump out and replaced it with a high hump $400.00 with good title. it is a 70 cst cab.
brake booster with new master cyl. and brackets already primed ready for paint $75.00 picked up or $95.00 shipped.
painted bright red battery tray $50.00 picked up.
ft. sway bar and frame brackets $50.00 picked up or $70.00 shipped.
power steering box, pump,hoses,brackets $100.00 picked up.
new 3 core rad. $75.00 picked up.
4 good used tires i think they are 255/70/15 at least 3/4 tread left on them $200.00.
i think i have a good sb fan shroud stored back $40.00 picked up.
2 black seat belts good driver shape $75.00 picked up.
firewall heater box with fan $25.00 picked up.
driver side alt. brackets $30.00 shipped.
auto brake pedal/bracket $25.00.
new trailing arm polly bushings $20.00 plus ride.
pair of black sun visers good driver shape $35.00.
i am sure there is stuff i forgot but will add later.

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

inner fenders and booster.

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[billsbowtie]

[DMARCUM123]

interested in the doors and fender

[billsbowtie]

heres a couple of pic.s of the 68. the wheels and bed are the frist things i am replaceing.

[billsbowtie]

[billsbowtie]

are you interested in the doors complete or just the shells. i want to try and sale the ft. fenders outer and inners and rad. suport altogether if i can.

[DMARCUM123]

the door shells

[DMARCUM123]

how are they on the bottoms
has they been repaired

[tphsmith]

im looking for a wire pig tail for the light on the back of the top of the cab, sorry for the life of me I cant think of the correct name for this light, ahh cargo light, would you have a pigtail for the wire harness, or the harness and the switch? let me know

[billsbowtie]

dmarcum i sent you a pm on the doors.
tphsmith i have wireing harnesses i will check them when i get time . if you don't here back from me by the weekend remind me. thanks bill

[ctucker]

could I get pictures of the seat belts if they are the latch style with the shevy emblems on them and the visors I am interested in those. Do they also come with the hardware? thanks