Any photos of 2" drop shackles 87 R10

[hurtsme2]

Any photos of 2" drop shackles 87 R10 SWB? Looking at the stock shackle it looks as if I'm going to have to cut a section out of the bed support rail. Am I seeing this right.

I just pulled off the 3" drop spindles this weekend I left the 3" drop coils on combined it was just to much drop with 15" wheels trying to get around parking lots and getting into my development I was scraping and rubbing the fender wells. So I will be going with a 3" drop front "I wish they made a 1" drop spindle" and hoping for a 2" drop rear If I don't have to cut the rear frame rail. I already bought the Belltech 6" rear flip kit with c-notch and 4-6in drop shocks so I guess I'll be posting them on E-Bay soon as well as the 3" drop spindles that have been ground down already.

Any photos on the rear would be a great help as well as advice.

thanks
Wall

[slug]

you will have to cut the support for the bed in order to use the drop shackles.

[tyjoja]

you have to cut the bed support wich is not to bad with the bed off. I just marked it off and used a sawsall for lack of anything better. took a while because thats some pretty thick metal but I made it. doesn't really affect the strength of the bed. good luck

[f.monroe]

I think the bed support has to be cut if you have the shorter 52 inch leafs but not with the longer 56 inch springs . Frank