Ashtrays & Glovebox Doors

[special-K]

*Prices Editted To Include Shipping*

I have a collection of ashtrays,all types 67-72 @$15,and glovebox doors.....@$30.Prices include shipping.
Please respond in this thread.Check or postal money order only.
I also have a collection of interior door handles and window winders @$7.50 pr (2 winders or 2 handles) and $12.00 a set (2 winders and 2 handles).Shipping included



*Ashtray pictures below
V V V V V V V V V V V

[oldschooler]

Could I see a better picture of the black glovebox door? Thanks, Rich

[special-K]

I can get one later.It is painted black,was Dark Olive.Do you still want a picture?No dents on any of these,complete with hinges,stop arm,and latch.
A couple are painted.

[gn4u2c2]

Would you happen to have a hood latch for a 72 longbed with a 250 inline 6?

[special-K]

I have 8 or 20,I`ll have to check.Front or rear?

Seriously though,I have all four designs of hood latches:Both Chevy and GMC 67/68 and 69/72.
I must first warn anyone considering one of these.Watch yourself and be very careful how you "handle" yourself around these things.They can be very "catchy".
Add $5 each for individual pictures. J/K!!! Feel free to ask....HEY!!!Hood latches???Wrong thread!

I also have a full variety of grille center supports.

[CCCC]

Do you have a light yellow ash tray (71/72 color, I think) - or, what colors do you have?
Thanks, CCCC

[oldschooler]

Originally Posted by special-K

I can get one later.It is painted black,was Dark Olive.Do you still want a picture?No dents on any of these,complete with hinges,stop arm,and latch.
A couple are painted.

Thats o.k., I have one that is painted. Thanks, Rich

[ctucker]

you wouldnt happen to have im not sure what its called but just the arm that goes on the glove box door stop arm may be it with hardware would you?

[myoldchevytruck]

Tim,

Do you have a cigarette lighter and assembly by chance? Pic if so. Thanks, Harry

[Thealien]

Are the door handles and window handles driver quality or better?

Thanks
Mark

[special-K]

Originally Posted by CCCC

Do you have a light yellow ash tray (71/72 color, I think) - or, what colors do you have?
Thanks, CCCC

I`ll check for you.I think that`s one color that`s not there.But,I have a Blazer at my mom`s that I`ll be parting in that color...Grapefruit/pale yellow,right?

I`m not sure what driver quality is.I always figured it means used and useable.Is it an exact description of just a general realm?As is not new,but very useable.
I`d say it`s all driver condition.Some alot better than others.All good enough to use.I`ll take a picture of a few.The clear winders are yellowed as they all do.Chrome is not pitted.The ashtrays and glovebox doors are as pulled from trucks.They were all pulled because they are good enough to go into another truck.Just used parts.Nothing beat-up.Just pulled and stashed.Figure,if your truck needs a door or ashtray and you don`t want to paint it.The paint is probably as good as the interior of a truck that needs a glovebox door or ashtray,if I have a matching color.No problem with individual picture requests.

I have the dash part of cigar lighters with the trim ring.I have ignition rings,too.Both in very good condition as everything else.

I have the glovebox door stops and hinges.Not worth seperating,boxing,and a trip to the post office unless I charge the same price as complete with door.You`ll just save a little on shipping.You`re better off finding them locally if that`s all you need.If someone wants a door w/o those pieces,I`d send them at the same time to make it worth my while.Then,I could ell for $5.00+shipping.Just keep an eye on the thread.

[CCCC]

Thanks for looking for the light/pale yellow ash tray (grapefruit color is about right) and let me know. Also, I have a Blazer that color, so please let me know of anything else (interior) that will be for sale when you part it. CCCC.

[67_C-30]

I'd be interested in a decent '67 glove box door if you have a nice one.

[badpeanut]

Do you have a bronze ash tray that will work with the plastic slides on my '72 GMC?

[special-K]

CCCC,I`ll keep that in mind.The glovebox door was poached off it already.It had a cool Desert Dynamics sticker on it.That Blazer came from NM in the early`80s.

I`ll get pics of the`67 door and check on the Bronze tray.I think Bronze was 71/72 only.So,if I have one it`ll be right.

[myoldchevytruck]

cost on the lighter, shipped to 33024? Thanks, Harry

[special-K]

Originally Posted by myoldchevytruck

cost on the lighter, shipped to 33024? Thanks, Harry

I`ll see if there`s a cheaper way than the flat rate box.

Here are some ashtrays:

68-70...



71/72...



Winders & Handles...



`67 glovebox door for 67C30...



`67 4wd...



Some others...

[special-K]

Some others...

[badpeanut]

The ash tray circled in red should work with my '72 with plastic slides right? It looks like bronze?

How much with shipping to 58401?

[special-K]

Originally Posted by badpeanut

The ash tray circled in red should work with my '72 with plastic slides right? It looks like bronze?

How much with shipping to 58401?

Yes,that`s the one.Not bad original paint on that one.I`d say $19 in a flat-rate box ($8.95).Pm your address if your intereted and I`ll get you my address for payment.

[special-K]

Everything but the Bronze ashtray with ringworm is available.

I hate to do this,but...

HEY!!!What are you doing???You don`t want one of these?I`ll tell ya what I`m a gonna do.I`ll throw in a free set of winders and handles to the first 30 that step up and take a glovebox door and ashtray.I`ll be honest with you fellers.My mom just called and offered to buy the whole lot for $100!!!!!! If anyone will give me less it`s yours + shipping(she never warmed my bottles when I was a baby).Just hit the "Buy itNOW" button and you`ll be the proud owner of this once in a lifetime brag about it at the bowling alley limited edition collection of US steel...uh,STUFF!!!

[special-K]

We`re extending our Mother`s Day Sale until Labor Day when prices will be reduced...Uh...er...I mean...where`s that delete button?(I hope nobody sees this)

Take it all for special package price!

[special-K]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!MEMORIAL DAY SALE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

With the rising price of fuel we have decided to increase these pieces by 25%.But,we`ll sell at the "old" price just to you...yeah you,the one reading this.Senior citizen discount offered to multiple purchase accounts on a cash on the barrelhead basis to all regardless of age,smell,or if you don`t have a pretty sister.Make me an offerI can`t refuse.Not your sister,these parts.Well,send pics and we`ll talk.I need to sell you this junk so I can get some nice stuff for myself.I`mgoing to stop now before I put my foot in my mouth.Please don`t judge the ashtrays,glovebox doors,and winder/handle sets by the seller.They really are quite useable pieces.How about an interior package consisting of 1 glovebox door,one ashtray,and a set of winders/handles?Mix and match if you like.Afterall,it`s THURSDAY MAY 29!!!$20+shipping!

[AGRV8D]

i would like a Set of 4 winders and handles and a black ash tray... 77562

have any door panel covers?

[special-K]

Tthree questions:
1)Do you need a 68-70 (ball rollers) or a 71/72 (nylon sliders)?
2)Clear or black winder nobs?
3)By door panel covers do you mean the escutheons for the handles(trim rings) or the vinyl upholstery that covers the door panel?I don`t have either of those.Is that what you meant?
I can do the flat rate @ $8.95.So,that`s ashtray@ $10 and 1 set of handles@ $7.50,right?If I can do shipping and box for less I`ll refund the difference.